Intelligence X180T Film Cutter User Manual
- June 17, 2024
- Intelligence
Table of Contents
Intelligence X180T Film Cutter
Product Information
Specifications
- Compliance: FCC
- Exposure Limits: Complies with FCC radiation exposure limits for an uncontrolled environment
- Minimum Distance : 20cm between the radiator and the body
Product Usage Instructions
Installation
To ensure proper installation of the product, please follow these steps:
- Select a suitable location for the equipment.
- Make sure there is a minimum distance of 20cm between the radiator and your body.
- Place the equipment in the desired location.
- Connect any necessary cables or power sources to the equipment.
- Verify that all connections are secure.
Operation
To operate the product, please adhere to the following guidelines:
- Ensure that the equipment is properly installed as per the installation instructions.
- Power on the equipment using the designated power button or switch.
- Follow any additional instructions provided in the user manual for specific operations or features.
- Monitor the equipment during operation to ensure it is functioning correctly.
- If any issues or abnormalities are observed, refer to the troubleshooting section in the user manual.
Frequently Asked Questions (FAQ)
-
Q: What are the FCC radiation exposure limits?
A: The FCC sets radiation exposure limits to ensure the safety of users. This equipment complies with those limits for an uncontrolled environment. -
Q: Why is a minimum distance of 20cm required between the radiator and the body?
A: The minimum distance requirement helps to minimize potential exposure to radiation emitted by the equipment and ensures user safety.
Intelligent Film Cutter
X180T Product Manual
Product List
Appearance and function
- Operation display screen Touch to control device operation
- Power button Press to start the device
- Driver (small car) Control the lateral movement of the cutting head
- Automatic paper feed sensor
- Side plate Auxiliary limit
- Knife head (cutting protective film) See 10-15 for details
- Pinch roller Vertical movement of fixed protective film.
- Power button Start the device,
- Data port access.
- Thimble: replace blade
- Blade knob, turn the knob to control the length of the blade
- 13 Blade holder base, fixed with blade holder position
- 14 Blade, cutting film
Instructions
Install the blade holder
Tips: The blade will gradually become dull when use a lot, which affects the cutting quality, it is recommended to replace it in time
Power connection, Starting up
Please use AC 100-240V: connect the adapter and power cord, and connect the other end of the power cord to AC 100-240V; the adapter’s DC output line plug Is connected to the Input port of the film cutter; install the blade holder to make sure it is fixed at the right position of the carriage head. After the connection and installation are completed, press the power button to start the device.
Screen film cutter machine operation
-
When using it for the first time, click “Set Network” to complete the wifi connection, click “Mine” in the lower function bar, end find “Select Language” to complete the language setting.
-
After the system starts normally, enter the homepage
-
Enter keywords in the search box, search for the product model you need ID rut, end select the corresponding model.
Cutting film
- Please prepare a protective film lo be cool as shown in the picture to ensure that the protective film is flat and the film layer is compel eta without bending, folding or missing layers .
- With automatic paper feeding: Push the protective film smoothly to the dotted area to let go.
- After checking that the protective film is properly placed, select the desired protective film model in the display screen of the film cutting machine or through Bluetooth in the APP interface, and click “start cutting” to cut.
- After the cutting finished, the protective film will be automatically pushed out, take out the protective film, and complete the cutting.
- The content of the manual will be revised irregularly according to product upgrades, which may be different from the actual product. Please refer to the actual product. Please forgive us for any inconvenience caused!
Specifications
Notice
- Avoid scratching your fingers
- The working environment where the machine is placed must be clean and tidy to prevent metal liquids from falling into the machine and cause fires, and there must be enough installation space.
- It is forbidden to damage or replace the original power cord. Do not excessively bend, pull, bind, or press the power cord under heavy objects to prevent damage to the power supply and cause electric shock or fire.
- If you do not use the machine for a long time, please disconnect the machine power to prevent fire.
- The table where the machine is placed must be flat and stable to prevent the machine from falling.
- When you want to disconnect the power, please grip under the plug and pull it out. Do not pull the cable. Forcibly pulling the cable may cause electric shock or fire.
- Prohibited to use during thunderstorms to avoid being hit by lightning
- Prohibit unauthorized disassembly
Scan the QR code, please download the film cutting machine App according to the prompts
FCC Statement
- This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/Ty technician for help.
- Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment, This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.