RemWave 2002BIO1 Sleep Sensor User Manual

Let’s get sleeping.
Allons dormir.

Set up your RemWave Sleep Sensor.

1. Download the RemWave Sleep app in the App Store or Google Play store.
2. Create an account.
3. Tap Add Sensor.
4. Follow the in-app instructions to setup your sensor.

What’s included.

1 RemWave Sleep Sensor

1 Power Supply and cord

We’re here for you.
Online help and support: biofi.com/help

Requirements, Safety, Warranty & Regulatory Guide for RemWave Sleep

REQUIREMENTS

The RemWave Sleep sensor requires a 2.4 GHz Wi-Fi network, a working broadband internet connection with at least 2 Mbps upload speed (DSL may not qualify), a compatible mobile device, the free RemWave Sleep app, and a RemWave account Minimum  requirements are available at biofi.com/  requirements. Live biometric data, phone alerts, and history may be subject to interruptions or failures for reasons beyond Praesidium’s control, like intermittent Wi-Fi or service provider outages. Subscription(s) may be required for some features, and terms, conditions, and/or charges may apply. All features, functionality, and other product specifications are subject to change without notice or obligation.

SAFETY

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person’s body and minimum separation distance of 7 cm (3 inches) between the sensor and any object.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

For additional safety information visit: biofi.com/safety

WARRANTY

For warranty information visit: biofi.com/warranty

REGULATORY INFORMATION (E-LABEL)
Details about your devices regulatory certifications are viewable in the RemWave Sleep app. To view your device details and regulatory certifications follow these steps after adding the device to your account:
Tap Account > Devices > Select a device from the list to view the regulatory information.

FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RemWave Sleep
Model: 2002BIO1
FCC ID: 2A7ZX2002BIO1
IC ID: 28837-2002BIO1
Contains FCC ID: 2ATUB-WIZFI360PA
Contains IC ID: 20560-WIZFI360PA

© Praesidium, Inc. RemWave Sleep, Heartprint, Powered by BioFi, and related marks and logos are trademarks of Praesidium, Inc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>