Shenzhen Yuntian Intelligence Control Technology YT-M001Z Zigbee Smart Plug User Manual

Shenzhen Yuntian Intelligence Control Technology YT-M001Z Zigbee Smart

Plug

Product Parameter

• Model: YT-MO01Z
• In/Out: 100-240V AC 50/60Hz
• Max.Current: 10A
• Powered by: Live and Neutral
• Material: PC,ABS VO

The instruction for app set up is for your reference only, More details and updated information, please contact Seedan after customer service.

How to Work With Amazon Alexa?

1. Confirm the LED indicator of Zigbee Plug is flashing( Red, purple and blue is flashing), The plug is in power-on mode, You can start to match the plug with Alexa.
2. Ask”Alexa, Discover my device”. The indicator light will flash three times with “ka ka’voice. After that, The indicator will always on.
3. Wait for the Zigbee plug LED indicator always-on, You will discover the device on your Alexa APP. Connected successfully.
4. Please start to voice control. For example:
   “Alexa, Turn on the first plug”.
   Note: You can group, Modify the device name as “First Light, Second Light” then, You can ask”turn on/off alights”

How to Work With Philips Hue Smart Things Hub?

Just add the Zigbee Plug to the Philips SmartThings App.

How to add?

1. Click the “Setting”
2. Choose “Light setup”
3. Auto-Search, and Add successfully.
4. Waiting for the new device shows up, Modify the name.
   Note: you can adjust the colors and brightness on the app.

How to Work With Samsung Hue Smart Things Hub?

Please follow the steps:

1. Please plug the smart plug into an outlet.
2. Open the SmartThings app, and click ”+”.
3. Click “Device→ SmartThings→Outlet
   → Outlet(IM6001-OTP1)→Start→Next
   → Done”.

Note: If it failed, reset the plug and try again.

WARM TIPS

1. When your app can’t find the plug after “Alexa, discover the device”, You can long-press the plug for 5s to modify.

2. Our plug is compatible

   • Echo Plus. Echo (4th Gen)
     Echo Show. Show 10
     Echo Studio

   • Philips Hub

   • Samsung SmartThings
     ANOTHER DEVICE IS NOT SUPPORTED.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>