PawHut D06-100V01 Wooden Dog Gate Foldable Pet Fence Instruction Manual
- July 30, 2024
- PawHut
Table of Contents
IN230400193V01_UK_FR_ES_DE
V01_UK_D06-100V01
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Before Using Product
Read and follow all instructions carefully to ensure that your gate and
extensions are properly installed. Improper installation could result in the
gate becoming unstable or dislodged from the doorway. Always make sure the
extension is securely attached to the gate before using. The safety of your
child is your responsibility. Please keep these instructions for your
reference.
IMPORTANT
- The four mounting brackets must be used in securing the gate to the wall. These brackets prevent the gate from dislodging from its opening and becoming unstable.
- If hardware mounting to a surface other than drywall or wood, please consult with a professional about installation.
WARNING
- TO PREVENT SERIOUS INJURY OR DEATH, SECURELY INSTALL GATE AND USE ACCORDING TO MANUFACTURER’ S INSTRUCTIONS.
- NEVER USE WITH A CHILD ABLE TO CLIMB OVER GATE OR DISLODGE/OPEN THE GATE.
- THIS PRODUCT WILL NOT NECESSARILY PREVENT ALL ACCIDENTS.
- KEEP AT LEAST 2 FEET FROM OPEN FLAME OR HEAT SOURCE.
- NEVER LEAVE CHILD UNATTENDED.
- USE ONLY WITH THE LOCKING/LATCHING MECHANISM SECURELY ENGAGED AND ON SIDE AWAY FROM CHILD.
- HIS PRODUCT INTENDED FOR USE WITH CHILDREN FROM 6 MONTHS UP TO 24 MONTHS OF AGE.
- HARDWARE IS INCLUDED FOR USE IN SOLID MATERIAL ONLY, SUCH AS WOOD OR METAL.
PARTS
HARDWARE
TO ADD A GATE PANEL
Install the lower plastic joints (C) first, position the removable bar, and
then install the upper plastic joints (B).
Press metal button ( “1” in diagram) and insert into plastic joints ( “2” in
diagram). You’ Il hear “Click” when you install them in place.
TO REMOVE A GATE PANEL
Use the Allen Key to press down the small metal button and separate the
plastic joint.
Please note that the components B and C can only be adjusted to 270 degree at most during using, otherwise it will be damaged.
TO SECURE GATE PANELS
Turn the knob counter clockwise until they are hand tight.
TO OPEN THE DOOR
- Push the door release button backward.
- Lift the door panel upward.
- Swing door open and release button.
Note: If you open the door past 90 degrees, it will stay open.
WALL MOUNTING
STEP 1
INSTALL WALL MOUNT BRACKETS TO WALL
Locate the mouting template vertical to the floor and mark the screw holes.
Drill holes on the wall.(FIGURE 7A) Insert the plastic expansion tubes(F) into
the holes.Assemble the wall mount bracket(D) to the wall. (FIGURE 7B)
STEP 2
ATTACH THE METAL ROD TO THE WALL MOUNT BRACKET
Use crosshead screwdriver to unscrew the screw on the side of wall mount
bracket(B), detach the plastic cover, and attach it to the metal rod, cover
the plastic cover and tighten the screw again.
US
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
UK
If you have any questions, please contact our customer care center.
Our contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>