MOJO 2 Bone Conduction Headphone User Guide

MOJO 2 Bone Conduction Headphone

Product Composition

How To Wear

Identify the left and Right of the headset by the volume Control touchpad and LED indicator. They should be on the Right Side. Wear the headset by wrapping it around your head and letting it rest on your ears.

Powe On
Press and hold the power button for 2 seconds until you hear· power on·. Release the pov,ter button when the indicator light is turned on.
Power Off
Press and hold the power button for 2 seconds until you hear· power off”. Release the power button when the indicator light is turned off.

Volume Control
The volume control touchpad is located on the right. Slide your finger up to increase the volume and slide down to decrease the volume; increase
the sliding speed for larger adjustments.

Pairing
When the headset is powered off. press and hold the power button for 5 seconds. listen for ·power on· and ·pairing· tone. The indicator light will flash to indicate. It is in pairing mode. In your Bluetooth settings. search for “MOJ02″ and tap to connect listen for ·source connected” to indicate successful pairing. The indicator light will be turned off after successful pairing.

Unpair
Choose “MOJ02″ from your device’s Bluetooth settings and select unpair. Wait for ·source disconnected” and”pairing· to indicate successful unpairing. After unpairing. the indicator light will flash to indicate it is ready to be paired with another device.

Connect
When the headset is powered on. it will automatically connect to the last connected device. You can also manually connect it to another device via Bluetooth settings. Once the headset is connected. the indicator light will be turned off. If the connection is unsuccessful. the indicator light will keep on flashing.

Disconnect
In your Bluetooth settings, search for “MOJ02″ and select to disconnect Listen for ·source disconnected” and”pairing· to indicate a successful disconnect.

Reconnect Automatically
In the connected state. if the distance between the headset and the connected device exceeds the Bluetooth communication range. the connection will be disconnected. The headset will enter into pairing mode with the indicator light flashing. If the distance between the headset and the connected device returns to the Bluetooth communication range within 10 minutes. the headset will automatically be connected again. If the headset is not reconnected within 10 minutes, the headset will shut down automatically.

Multi-function Key & volume control touchpad

• Play/Pause Music Press lx
• Skip to the next track Press 2x
• Back to previous track Press3x
• Answer a call Press lx to answer
• Decline a call Press 2x to decline
• Cancel an outgoing call Press lx while calling
• Hang up a call Press lx during the call
• Hold A’s call and answer incoming calls from B During a call with A press lx to answer an Incoming call from B
• End a call with A and answer an incoming call from B During a call with A press 2x to end the call with A and answer an incoming call from B
• Voice Assistant Click 2x the volume control touchpad.

Indicator Light

• Indicator light on power on
• Indicator light off power off
• Indicator light flashes slowly not connected
• Indicator light flashed quickly pairing
• The indicator light stops flashing and turns off connected
• Indicator light flashing, the light-dark ratio gradually increases charging
• Indicator light is always on Battery is fully charged
• The indicator light flashes 3 times low battery

Specifications

• Model: MOJO2
• Frequency Response: 2.4GHz
• Bluetooth Verslon: BTS2
• Battery: Lithium Ion Battery
• Charging: SV =-=-= S00mA
• Playtime: B hours
• Microphone Sensitivity: – 3BdB
• Weight: 26g
• Speaker: Bone Conduction Speaker
• Bluetooth Range: 10m
• Protocol: A20Pl.3 ( HFP) AVRCP 15
• Battery: 130mAh
• Charging Time: <= BOmin
• Standby Time: 130 hours
• Waterproof: IP67
• Warranty: 1 Year

Charging

Connect the USB-A end of the charging cable to an SV power adapter. To charge the headset attach the magnetic charging head to the charging port of the headset. The indicator light will flash during the charging process and the light-dark ratio gradually increases. After charging is completed, the indicator light will stay on.

Restore to factory settings

Tum on the power, press and hold the power button for 8 seconds. the headset will be restored to factory settings. All pairing information will be deleted, and it will enter into pairing mode after an automatic restart

• Please charge the headset before using it for the first time. Make sure the charging port is dry.

Storage and Maintenance

The headset should be stored In a cool and dry place. It should be used at an ambient temperature between 0°C(32° F) and SS°C(l31 °F). and charged at an ambient temperate between o·c and 40°C. Working in extreme cold. hot or humid environments may shorten the battery life. When left unused for a long time. please recharged the headset before use.

The headset can be daily cleaned. Do not use high-pressure water to wash the microphone or immersed the product in water for an extended period of time. Doing so may damage the microphone or waterproof performance. If the charging port is wet, dry it with a soft dry cloth before charging.

Important Safety Instructions

Use manufactured r-designated accessories and supplies only.

Warning/Caution

• When not in use. keep the headset away from children and pets. This product contains lithium batteries which can be dangerous if swallowed. If swallowed, seek immediate medical attention.

• Do NOT use the headset at a high volume for extended periods of time.

  • To avoid hearing damage. use the headset at a moderate volume. Listening to music at high volume levels may damage your hearing
    and the sound may be distorted.

  • Please turn the volume down before placing the headset on your ears. then gradually turn the volume up to a comfortable listening level.

• For use of the headset during driving, use it with caution and follow applicable laws regarding the use of mobile phones and headsets. Some jurisdictions Impose specific limitations on the use of such products while driving. Do not use the headset for any other purposes while driving.

• For use of the headset during activities that require concentration, such as cycling, or walking on or near roads. construction sites or railways. pay attention to your own safety and that of others. Follow relevant laws regarding the use of headphones.

• This product contains small parts which may be a choking hazard. It is not suitable for children under age 3.

• This product contains magnetic material. Consult your physician on whether this will affect your implanted medical device.

• Do not make unauthorized alterations to the product.

• Use this product with power sources approved by relevant authorities and meet local regulatory requirements (le. UL CSA, VDE, CCc).

• Do NOT expose the product to excessive heat (le. Avoid direct sunlight and keep away from the fire).

• Do not expose the product to high temperature, smoke, or fume. Doing so may cause it to catch on fire.

• Do not charge the headset during thunder and lightning.

• Do not throw the headset into the fire. Doing so may cause the battery to explode under high temperatures.

• Do not expose this product to hot temperatures, smoke, or fume least it may catch fire.

• Do not charge this product during thunder and lightning.

• Do not throw this product into fire lest the battery may explode when overheated.

The Bluetooth° word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

Apple, the Apple logo, iPad, iPhone, and iPod are trademarks of Apple inc. registered in the U.S. and other countries/regions. App Store is a service mark of Apple Inc. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this product or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.

Android, Google Play, and the Google Play logo are trademarks of Google LLC.

Accessories

Earplugs
For a more focused listening experience in noisy environments. please use the earplugs included in the package to block out any background noises. Roll the earplugs to fit into your ears.

Charging cable
Please only use the MOJO2 charging cable for charging. If the charging cable is damaged, please replace it in time. Please follow 5V-500mA specifications for the power adapter.

Storage Bag
When not in use, keep the headset in the storage bag to avoid damage.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received. including interference that may cause undesired operation.

Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Contact us

If you have any other questions, visit https://mojaverse.com/ or mail to: aftersale@mojaverse.com. Product specifications. designs. and the content of these operating instructions is subject to change without notice.

For an update on MOJAWA please visit our website: https://mojaverse.com/.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>