Shenzhen Ultra Easy Intelligence Q30T Smartwatch User Guide

June 3, 2024
Shenzhen Ultra Easy Intelligence

Shenzhen Ultra Easy Intelligence Q30T Smartwatch

Product Introduction

  • Functional key
  • Display screen
  • Shortcut key
  • Sensor
  • Charging port

In order to use it better, please read this operation guide carefully before using the watch and keep it properly.

Note:
Product pictures such as products, accessories, user interfaces shown on the operation guide are for illustration purpose only and actual product may vary due to product update and enhancement.

Wearing

Wear your watch one finger from the wrist bone and adjust the strap tightness to ensure the heart rate sensor collects data properly.

Note:
Too loose wearing may affect the accuracy of heart rate monitoring data.

Connection

Scan QR code or search “GloryFit” in AppStore (iOS) or Google Play (Android) to download and install the app

User can set personal information on the mobile phone.
Switch to “Device” screen and click to bind the device.
Click your device on the scanning list.
Bind successfully.
WeChat scan.
QR code on the watch.

Usage

Screen operation
  1. Enable shortcut menu.
  2. Enable message notifications.
  3. Switch functional card.
  4. Enter functional menu.
  5. Return to the last level.
  6. Select other watch face setting.

Recharging

The watch is magnetic charging. Please match the charging pins of the charging cable to the watch’s charging port until the watch screen shows the recharging reminder.

  1. When charging, to ensure stable charging, the watch screen will be off and users can click the button to wake up the screen. When the watch power is too low, it will take 3 to 5 minutes to charge before waking up the watch, which is normal. Please wait for 5 minutes and then check the watch charging status.
  2. Please use the exclusive charging cable to charge. The charging way is unidirectional, so please pay attention to the charging direction, correct charging will absorb, while wrong direction will repel, please do not force charging.
  3. Please connect charging socket to power adapter (5V/0.5A) or PC with USB cable. Please recharge the watch when the power is low.

Strap adjustment and disassembly

Strap adjustment

Adjust the watch buckle according to your wrist to ensure the strap and watch cling to your wrist.

Strap disassembly and assembly
  1. Pull the buckle of the strap and lift the strap to remove it.
  2. Insert one side of the strap into the lugs, pull the buckle of the strap, align the other side with the lugs and release the buckle, then the strap is fitted with a click.
  3. Pull and tug the strap to ensure it is well-installed.

Disassemble the strap
Assemble the strap

[Product name] Smartwatch
[Product model] Q30T
[Manufacturer] Shenzhen Ultra Easy Intelligence Co., Ltd.
[Address] 6E, Block D, Central Avenue, Intersection of Xixiang Avenue and Baoyuan Road, Labor Community, Xixiang Street, Baoan District, Shenzhen
[Wireless connection] Bluetooth BLE 5.2
User Guide version no. V1.0

The watch supports such functions as Bluetooth calling, daily exercise monitoring, sports mode monitoring, healthy management data monitoring, offline payment and notification reminders.

The watch can be connected to mobile phone through Bluetooth, and users can answer, reject calls and check call logs and contacts on the watch end.

  • Bluetooth calling function
  • Daily exercise monitoring function
  • Sports mode monitoring function

The watch supports multi-functional sports modes and data recording. More than 20 workout modes are supported, such as outdoor running, outdoor cycling, skipping,
badminton, table tennis, tennis, mountaineering, walking, basketball, football, baseball, volleyball, cricket, rugby, hockey, dancing, spinning, yoga, sit-ups, indoor running, gymnastics, rowing, jumping jack and free training.

Wear the watch to the wrist can monitor and record daily steps, distance and calories.

Core function

Healthy management monitoring function

The watch supports healthy data monitoring and display, such as heart rate, blood oxygen, sleep and so on (all the healthy data provided are for reference only and should not use as medical diagnose).

Message, weather, music, low power reminder, alarm clock, incoming call reminder, find my phone, sedentary reminder, wrist awake, 12/24 hour system, flashlight, stopwatch, timer, calculator and so on (the actual product may vary due to the functional differences of the watch models).

Other functions

Precautions

  1. Protect the watch from strong impacts, extreme heat and exposure to the sun.
  2. Please do not dissemble, repair or modify the watch yourself.
  3. Please use the watch in an environment of 0℃ to 45℃. It is forbidden to throw it into the fire to avoid explosion.
  4. Please use a soft cloth to dry the watch before charging, otherwise it will corrode the charging pins and lead to charging failure.
  5. Please do not expose to chemicals such as petrol, cleaning solvents, propanol, alcohol or insect repellents.
  6. Please do not use this product in high voltage, high magnetic environments.
  7. Please dry your wrist timely. Prolonged exposure of the strap to soap, sweat, allergens or polluting ingredients may cause skin irritation and itching.
  8. If worn regularly, it is recommended to clean the watch weekly by wiping it with a damp cloth and using a mild soap to get rid of any oil or dirt. It can be worn when washing your face and hands, but is not recommended when bath or swimming.
  9. Please use the charging cable supplied with the unit and certified power adapter for charging.

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the follow two condition:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operations.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an licensed radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements.
The device can be used in a portable exposure condition without restrictions.

Basic parameters

  • Bluetooth: Bluetooth5.2
  • Compatible system: Android5.0+IOS8.0
  • Packing list: watch, charging cable and user guide
  • Master control chip: Realtek 8763EWE
  • Display screen size: 1.39” TFT
  • Standby time: 5-15 days
  • Resolution: 360*360
  • Working temperature: 0℃~45℃
  • Watch size: 46.754.211.4mm
  • Strap material: silicon
  • Product name: smartwatch
  • Product model: Q30T
  • Battery capacity: 300mAh
  • Product weight: about 38g

Warranty Notice

The after-sales service of this product is strictly by the Law of People’s Republic of China on Protection of Rights and Interests of Consumers and the Law of the People’s Republic of China on Product Quality and it provides three-guarantee service as follows:

  1. Within 7 days from the day after you sign for the product, the consumer has the option of returning, replacing or repairing the product in the event of a non-human performance failure.
  2. Within 8 to 15 days from the day after you sign for the product, the consumer has the option of replacing or repairing in the event of a non-human performance failure.
  3. Within 12 months from the day after you sign for the product, the consumer has the option of free warranty in the event of a non-human performance failure.

Non-warranty regulation

  1. Unauthorized maintenance, misuse, collision, negligence, fluid penetration, accident, modification, incorrect use of non-product accessories, or torn or altered labels and anti-counterfeit markings;
  2. It has exceeded the expiry date of the three-guarantee service;
  3. Damages caused by force majeure;
  4. Does not meet the failures listed in the Product Performance Failure List;
  5. Performance failures of the product and its accessories listed in the Product Performance Failure List due to human causes.

Product Performance Failure List

  • Name
  • Performance failure
  • Watch body
  • Abnormality of display screen
  • Vibration failure
  • Operation failure of display screen
  • Failed to sync the designated device
  • Can not boot
  • Charging cable

Failed to charge the watch

  1. User information
  2. Product data
  3. Maintenance record

E-mail
Name
Tel.
Contact address
Postal code:
Device SN number
Date of acceptance
Failure phenomenon
Solution
Signature of repairer
Three-guarantee certificate

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals