Danfoss HPBV High Pressure Bypass Valve User Guide
- June 17, 2024
- Danfoss
Table of Contents
Operating Guide
HPBV / 860L9710
HPBV
High pressure bypass valve
Installation
Default
Presetting DP range: 0.5-2.5 bar
Rotate hand wheel anticlockwise to increase presetting DP. Rotate hand wheel
clockwise to decrease presetting DP.
Unit of number is bar on the outside circle of hand wheel.
Unit of number is tenth bar on the inside circle of hand wheel.
Notice
- Don’t install the valve in bend of pipe.
- Don’t rotate the hand wheel forcefully when reaching min/max setting.
Technical data
Pressure setting range: DN25, DN32: 0,5 – 2,5 bar
DN40: 1 – 3 bar
Norminal pressure: PN16
Tmax : 90 °C
DP – Flow curve
Danfoss A/S
Climate Solutions
danfoss.com
+ +45 7488 2222
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals, catalogues descriptions,
advertisements, etc. and whether made available in writing, orally,
electronically, online or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogues, brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also
applies to products ordered but not delivered provided that such alterations
can be made without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All
rights reserved.
2 | © Danfoss | DCS-SGDPT/SI
2024.01 860L9710 / AQ302932941203en-010302
Documents / Resources
|
Danfoss HPBV High Pressure Bypass
Valve
[pdf] User Guide
HPBV High Pressure Bypass Valve, HPBV, High Pressure Bypass Valve, Pressure
Bypass Valve, Bypass Valve, Valve
---|---