Escali Aqua Digital Scale User Manual
- June 17, 2024
- Escali
Table of Contents
Precision Weighing Solutions
Model: Aqua
User Manual
Aqua Digital Scale
Thank you for purchasing an Escali Digital Scale.
Please read the following operation information to ensure the proper function
of your new scale.
How to weigh:
- Press the “On” button.
- Zero will appear on display.
- Place item gently on the panel.
How to measure liquids:
Your scale allows you to weigh liquid ingredients and allows you to change
the density setting for different liquids.
During normal weighing you press the Aqua button to display the equivalent
liquid measurement.
Press the Aqua button again to return to the ounce/gram mode.
How to change the density setting:
- Press and hold the “Aqua” button for 3 seconds.
- The current density setting will be displayed.
- Press the “A” or “V“ button to change the density setting.
- Press the “Aqua” button again to store the new setting. The scale will return to the liquid measuring mode shortly
You can visit www.escali.com for an overview of liquids and their density values.
How to use the “Tare” feature:
This feature allows the display to be reset to zero after you weigh an item
in a container or bowl.
It shows the weight of additional items as if you were to weigh them
separately.
- Turn the scale on.
- Place the container, without the item, gently on the platform.
- Press the “Tare” button, and the weight of the container will be removed. The display value will reset to zero.
- Gently add the item to the container. The display will show the weight of the item only.
- Repeat step 3 and 4 when adding more items to the container.
How to clear the “Tare” feature:
- Remove all items from the platform.
- Press the “On” button and the display value will reset to “Og/00z”.
- The scale is reset. You can continue with normal operating.
Changing the Weighing Mode:
- Turn the scale on.
- Press the Kg/Lb button to change to Ounces, Pounds/Ounces or Grams.
- Your scale will keep the last used weighing mode in memory and will return automatically to this mode when you turn the scale on.
Do not place overweight items on the scale
Weighing items over the maximum weight capacity will cause an “EEEE” to
display. Immediately remove overweight items to avoid causing damage to your
scale.
How to use the “Timer” feature
- Press the “Timer” button.
- The minutes will flash.
- Press the “Λ ” or “V” button to change the minutes.
- Press the “Timer” button again.
- The seconds will flash.
- Press the “Λ ” or “V* button to change the seconds.
- Press the “Timer” button again to start the count down.
- When the timer gets to zero, you will hear an alarm beep.
- Press the “Timer” button again to turn the alarm off. The display will blink for a few seconds, and will turn off.
To pause or change the timer setting during count down, press the “Timer” button and repeat the above steps.
Power Source: 9-volt battery
Dimensions: 9″ x 7. 5″ x 2″ (23 c m x 19cm x 5c m)
Graduation : 1/16 oz. or 1 gram
Capacity : 11 Lb or 5 000 gram
Weight Modes: Lb./Oz, Oz, Fl. Oz, Grams and Ml
Auto Shut Off: Turns off aft er 4 minutes of non-use.
Additional Information
- Make sure your scale is at room temperature and on a stable horizontal surface free of vibration.
- This scale is not waterproof. Do not expose to moisture.
- As this scale is a precision instrument, it must be handled with extreme care. Avoid rough treatment, shaking or vibration.
- Do not disassemble this scale or the warranty will be void.
- The display value may be affected by electromagnetic disturbances such as operating near a radio. If this occurs, move the device that is causing the disturbance and turn the scale off and restart.
Battery Replacement
Replace the batteries when the low battery symbol appears on the display.
Escali’s liability is limited to two (2) times the cost of the product.
see www.escali.com for full details
© Copyright Escali Corp , 20 12
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>