eurolux S20C Mini Disc Spotlight Instruction Manual
- June 17, 2024
- eurolux
Table of Contents
eurolux S20C Mini Disc Spotlight
Please read instructions before commencing installation and retain for future reference.
SPECIFICATIONS
- Fitting Material: Steel with clear Perspex ring.
- Lamp type: Excluding 1 x E14 R50 maximum 40W 230V.
- Voltage: 220V – 240V ~ 50Hz.
- Protection against electric shock: Class 1. Requires earthing.
- IP Rating: 20. Dust Protected. Protected against solid foreign objects of 12.5mm Ø and greater. Not protected against water.
- Commercial / Domestic use.
- Not suitable for outdoor use.
- Maximum ambient temperature range: 20ºC – 40ºC.
- Dimensions: (Ø)80mm x (D)150mm.
IMPORTANT SAFEGUARDS
S20C / S20GM / S20SC / S20W – attachments:
If the external flexible cable or cord of this luminaire is damaged, it should
be exclusively replaced by the manufacturer or his service agent or a similar
qualified person in order to avoid a hazard. To ensure that you get maximum
longevity and maximum use out of your luminaire, please observe the following
safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire must be carried out by a qualified electrician, in accordance with SANS 10142. On completion of installation, ensure that the Certificate of Compliance is updated.
- Before connecting the luminaire, ensure that voltage indicated on the rating label corresponds with the mains voltage in your home.
- When changing the lamp, ensure that the power is turned off.
- Ensure that the correct lamp type and wattage is fitted.
- This luminaire is checked in full for conformity to the quality standards and safety requirements.
- The manufacturer / supplier is not responsible for any damage of properties and persons, caused by the incorrect use or installation of the luminaire.
- Should you be unsure of how to install this luminaire correctly, please consult a professional electrician or your supplier for assistance.
- Ensure all items / components, threads and screws are tightly secured.
IMPORTANT:
- Tampering with this luminaire, i.e. using silicon sealers or incorrect cabling, will invalidate your warranty.
- Please check whether the connection of the power cord is safe and reliable before installation.
- If your mains wiring differs in any way from diagram, consult a qualified electrician.
- Always ensure that the mains supply voltage is correct.
- Always replace the lamp with one of an identical rating and wattage.
- Choking hazard: May contain small parts. Keep away from children.
- Do not insert your fingers or any part of your body into the electrical contact and sockets of this product whilst it is connected to the electrical supply.
- Item may vary slightly from the picture on the carton.
INSTALLATION
- Before installation always ensure the power supply is turned off.
- This luminaire is only suitable for fixed mounting.
- Not for use outdoors or in areas exposed to moisture.
- Insert masonry plugs into the mounting surface.
- Test to ensure the mounting surface will hold the weight of the fitting (1) & (2).
- Connect main supply into terminal block making sure all connections are tight (3).
- Fix the bracket into the mounting surface with self-tapping screws (4).
- Fix the lamp (5) to the lamp holder.
- Reconnect power supply
CLEANING
- Before cleaning always ensure the power supply is turned off.
- Do not immerse the luminaire in water.
- No abrasive products, solvents, detergent may be used to clean this luminaire.
- Ensure that the fitting does not come in contact with corrosive chemicals, etc.
- Use a soft cloth to clean.
ILLUSTRATIONS
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products showing this marking must not be disposed of with other household or commercial waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate any such products from other waste types and recycle it responsibly at your local facilities.
PRODUCT CODE
S20C / S20GM / S20SC / S20W
Cape Town – 9 Racecourse Road, Milnerton, 7441
Johannesburg – 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>