CRORZAR Indoor 360 WiFi Pan-Tilt Smart Security Camera User Manual
- June 5, 2024
- CRORZAR
Table of Contents
Crozier 360
WIFI PAN/TILT SMART CAMERA
Quick User Manual CZ-PT-CAM1
Included in the Box
The following are included in the box with your purchase.
Product Details
Please check the interface and buttons of the camera before using it.
How to prepare the camera
Please note:
Voice prompts are automatically available throughout the configuration
process. Your memory card comes pre-installed on your camera. Connect your
camera to power as shown below. Do not unplug your memory card or insert a new
one while the power is turned on. Please power off to install or uninstall
your memory card.
Connect with power supply
Memory card installation
Please make sure to plug the memory card in the direction shown in the figure.
How to Download APP
Method 1:
Scan the QR Code to download the App.
Method 2:
Search for “Crorzar Cameras” in the App Store or “Crorzar Pro” in Google Play
Store and download directly.
https://apps.apple.com/cn/app/crorzar-cameras/id1478694740
https://play.google.com/store/apps/details?id=com.xm.crorzar.prov
User registration & login
- If you have a Facebook ID, you can tap the Facebook icon on the APP interface directly to log in.
- You can also create a new account and log in: Click “Sign Up” to register a new account.
- Enter a new username and password.
- Enter an email address and tap “Get Code”(a verification email with a code will be sent to this address so please find the email to get the code and then input this code in where you just entered the email address and tap Sign Up).
- Then log in using the username and password you just registered.
Configure network connection for the camera
Method 1: through WIFI (recommended)
Method 2: via LAN port
Connect the power supply
Connect the camera to LAN Porte
Note: About the wired connection, you need to connect the camera to the router using the LAN cable.
-
After logging in successfully, click “+” in the upper right-hand corner and then click “ More” from the popup select the fourth method “Add device in the same WLAN”
The mobile phone must be connected to the same WIFI network. ( if no device is found, please check if it is the same network ) -
Go to the “Search Device” interface and click on (Fig1). “robot_**”** (Fig 2). Click “Add Device” to complete it.
-
The device will appear in the device list of the APP (as shown in Fig 3), and display the camera “online”, indicating that the camera configuration is complete.
-
Click the play button on the screen to enter real-time monitoring, and enter the settings to set the wireless network and other relevant operations.
Method 3: via AP Mode
Note: Direct connection is limited to remote viewing within 10 meters
when without a network
-
Press the “RESET” button 2-5 times Shortly on the device, the device will prompt “Entering AP direct connection mode”.
-
Click the “+” in the upper right corner of the APP, then click “More” at the upper right. Select the fifth mode “AP mode” (Fig 4).
-
IOS device: click “to set the WIFI” (Fig 5)
Android: Search device name (Figure 6) -
Find the device and click Add or display the name “robot_**” and add.
Input the AP password 1234567890 and add the device to view it (Figure 7).
(AP mode is limited to remote access within 10 meters when without a network)**
Multiple cameras can be added to the App and all of them will show up on the main screen of the app, long-press on a camera can lead to the menu that the user can share, set, or delete the camera.
View the camera through App
Users can achieve real-time monitoring through the camera once it is added successfully on App by pressing the “Play” icon like Fig 7, there are also some functions the available user can use on the page below.
Setup the Tour and Auto Track functions
Users can tap the icon in Fig 9 to go to the settings of Tour and Auto Track
shown in Fig 10.
Tour: it allows the user to preset three positions from the camera view
to create a route that the camera will follow to rotate for monitoring
automatically.
3 tour points(No.1, 2, and 3 buttons shown in Fig 10) need to be preset before
the user can start the tour, user can rotate the camera to a certain position
which shall be the starting point of a route, then press the No.1 button,
which will light up, then rotate the camera to select a position for the No.2
button, and select a position as the ending point of the route for the No.3
button.
To start a tour, the user can press the Start Tour button in Fig 11.
Users can long-press a button to reset or delete the tour point in Fig 12.
Auto Track: this is a function the camera can monitor a watching
position, and it will start to automatically track a moving object or human
that appears in camera view and
constantly follow it till it stays still or it’s out of camera view.
The camera will return back to the watching position after it no longer tracks
an object or human.
Users can rotate the camera to select a position that shall be the default
watching position and press the Set Watch button, and then turn on the Auto
Track Switch.
Turning off the Auto Track Switch will stop the camera from tracking moving
objects and humans.
Camera Settings
Users can set up the camera when necessary, press the “setting” icon in the upper right-hand corner on Fig 8.
Basic Settings
Manage Password
Alert Settings
Alert Settings-Intelligent Vigilance
Manage Storage
Advanced Settings
Network Settings
1855-700-2482
[email protected]
For questions or help, please contact us. Answers to frequently asked
questions, as well as video demonstrations of setting up your camera, can be
found at https://www.crorzar.com/pages/cameras