MI AY24CA Robot Vacuum E10 User Guide
- June 17, 2024
- Mi
Table of Contents
- Safety Instructions
- Product Overview
- Indicator Status Descriptions
- Before Use
- Connecting with the Mi Home/Xiaomi Home App
- How to Use
- Care & Maintenance
- Troubleshooting
- Specifications
- Regulatory Compliance Information
- WARRANTY NOTICE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MI AY24CA Robot Vacuum E10 User Guide
Safety Instructions
Read this manual carefully before use, and retain it for future reference.
This product is for floor cleaning in a home environment only. Do not use it outdoors, on non-floor surfaces, or in a commercial or industrial setting.
Usage Restrictions
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- This appliance contains baeries that are only replaceable by skilled persons.
- Please keep the cleaning brush out of reach of children.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Do not use the robot vacuum to clean any burning substances.
- Make sure the robot vacuum is turned off and the power supply is unplugged before cleaning or performing maintenance.
- This robot vacuum is only intended to clean floors in a home environment. Do not use it outdoors such as on an open balcony or on a surface that is not a floor, like a sofa, or in a commercial or industrial setting.
- Do not use the robot vacuum in an area suspended above ground level, such as a lo·, open balcony, or on top of furniture, unless a protective barrier is present.
- Do not use the robot vacuum at an ambient temperature above 35°C or below 0°C or on a floor with liquids or sticky substances.
- Pick up any cables from the floor before using the robot vacuum to prevent it from dragging them while cleaning.
- Pick up any fragile or loose items from the floor, such as vases or plastic bags, to prevent the robot vacuum from being obstructed or bumping into them and causing damage.
- Do not place children, pets, or any item on top of the robot vacuum while it is stationary or moving.
- Do not use the robot vacuum to clean the carpet.
- Do not allow the robot vacuum to pick up hard or sharp objects such as building materials, glass, or nails.
- Do not spray any liquid into the robot vacuum (make sure the 2-in-1 dust compartment with water tank is thoroughly dry before its reinstalling).
- Do not place the robot vacuum upside down.
- Only use this product as directed in the user manual. Users are responsible for any loss or damage arising from improper use of this product.
- For detailed e-manual, please go to www.mi.com/global/service/userguide
Batteries and Charging
- WARNING: Only use the supply unit provided with this appliance.
- Use only with
or supply unit. - Do not aempt to disassemble, repair, or modify the baery or charging dock on your own.
- Do not place the charging dock near a heat source.
- Do not use a wet cloth or wet hands to wipe or clean the dock’s charging contacts.
- If the robot vacuum will not be used for an extended period, fully charge it, then turn it off and store in a cool, dry place. Recharge the robot vacuum at least once every 3 months to avoid over-discharging the baery.
- The lithium-ion Batteries pack contains substances that are hazardous to the environment. Before disposing of the robot vacuum, please first remove the Batteries pack, then discard, or recycle it in accordance with local laws and regulations of the country or region it is used in.
- When removing the Batteries from the product, it is beer to use up the Batteries and make sure your product is disconnected from power.
- Uninstall the screw on the boom, then remove the cover.
- Unplug the Batteries connector, then remove the Batteries. Do not damage the Batteries case to avoid any risk of injuries.
- Return the Batteries to a professional recycling organization.
Product Overview
Package Contents
-
Robot Vacuum
-
Cleaning Brush
(In the 2-in-1 dust compartment with water tank) -
Brush
(Pre-installed in the robot vacuum) -
Brush Cover
(Pre-installed on the robot vacuum) -
Side Brush
-
2-in-1 Dust Compartment with Water Tank (Pre-installed in the robot vacuum for vacuuming and mopping)
-
Mop Pad Holder
-
Mop Pad (Pre-installed on the mop pad holder)
-
Charging Dock
-
Power Supply
-
User Manual
Note: Illustrations of product, accessories, and user interface in the
user manual are for reference purposes only. Actual product and functions may
vary due to product enhancements.
Press and hold for three seconds to turn on or off
Press to start or pause cleaning
Press to return to charge or stop docking
Indicator Status Descriptions
White : Turned on/Working normally/Charging completed/Standby
Breathing white : Charging (Battery level ≥ 20%)/Turning on
Blinking white : Returning to charge/Updating firmware/Connecting to the
network
Off : Turned off/In sleep
Yellow : Wi-Fi disconnected
Blinking yellow : Reseing Wi-Fi/Error
Breathing yellow : Charging (Battery level < 20%)
Before Use
-
Remove the protective strips.
-
Install the side brush.
Take out the side brush, and install it onto the position as indicated in the figure. The side brush is properly installed when you hear a “click
-
Remove the protective film from the charging dock and place the charging dock against a wall. Connect it to the power.
CAUTIONS:- Do not place the charging dock in an area with direct sunlight.
- Please ensure that no items are placed within 0.5 m on the le· and right sides and within 1.5 m in front of the charging dock
-
Charge the robot vacuum.
Place the robot vacuum on the charging dock to charge.
Notes:
- It is recommended to fully charge the robot vacuum before using it for the first time to maintain its optimal baery performance and maximize Batte ry life.
- The robot vacuum will turn on automatically when it is on the charging dock, and cannot be turned off while charging.
Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/Xiaomi Home app to control your device, and to interact with other smart home devices.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search for “Mi
Home/Xiaomi Home” in the app store to download and install it.
8C8BA4EF
- Open the Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow the instructions to add your device.
- The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Notes:
- The version of the app might have been updated, please follow the instructions based on the current app version.
- If the robot vacuum’s QR code cannot be scanned, you can search for its name to add it.
- When connecting the robot vacuum to the Mi Home/Xiaomi Home app using an iOS device, follow the instructions in the app to connect to the robot vacuum’s hotspot “xiaomi-vacuum-b112_mibtxxxx”.
Reseing Wi-Fi
While the robot vacuum is turned on, press and hold the Button and for seven
seconds. The Wi-Fi is successfully reset when you hear a voice prompt.
Reseing System
Press and hold the Button for five seconds until you hear a “beep”, and then press and hold the Button for five seconds again until you hear the voice prompt. The robot vacuum then restarts, and settings. like scheduled cleaning and Wi-Fi are restored to factory default.
Common Issues | Possible Causes and Solutions |
---|---|
The robot vacuum cannot connect to Wi-Fi. |
- Check whether the Wi-Fi password is correct.
- The robot vacuum does not support the 5 GHz network frequency band. Please use a 2.4 GHz network.
- The Wi-Fi signal is weak. Make sure the robot vacuum is within the Wi-Fi coverage with a strong signal.
- There is something wrong with the Wi-Fi connection. Reset the Wi-Fi and download the latest version of the Mi Home/Xiaomi Home app, then try reconnecting.
The robot vacuum cannot connect to the “xiaomi-vacuum-b112_mibtxxxx” network in the Mi Home/Xiaomi Home app.| Make sure the robot vacuum is within the Wi- Fi coverage with a strong signal, then reset the Wi-Fi of the robot vacuum and reconnect to the network.
How to Use
Start Vacuuming & Mopping
-
Press and hold the release buon to remove the 2-in-1 dust compartment with water tank. Open the plug, fill the tank with clean water, and then refasten the plug. Install the 2-in-1 dust compartment with water tank onto the robot vacuum until it firmly clicks into place.
CAUTIONS:- Please remove the 2-in-1 dust compartment with water tank before adding water. Do not add liquids such as hot water, detergent, or disinfectant to prevent damaging the robot vacuum.
- Due to production testing, the 2-in-1 dust compartment with water tank may have water stains, which is normal.
-
Before using the vacuuming & mopping function, dampen the mop pad and wring it out and then install it onto the mop pad holder.
Install the mop pad holder to the 2-in-1 dust compartment with water tank, as illustrated. -
-
3. 4. 3. Install the 2-in-1 dust compartment with water tank into the robot vacuum. Press the Button to start vacuuming and mopping.
-
CAUTION: Remove the 2-in-1 dust compartment with water tank and pour out the le·over water in a timely manner a·er a mopping task has been completed. Then clean and dry the mop pad to prevent odor and mildew.
If only vacuuming function is needed, please remove the mop pad
holder.
Pull the holder out as illustrated
Pausing
When the robot vacuum is running, press any Button to pause. Press the
Button to resume cleaning.
Note: The robot vacuum will enter sleep mode a·er being paused or in
standby mode for five minutes. Press any Button to wake it up
Adding Water or Cleaning the Mop Pad
When the robot vacuum is working, pause it first then remove the 2-in-1 dust compartment with water tank to add water or clean the mop pad. Then reinstall the 2-in-1 dust compartment with water tank and press the Button to resume the task.
Docking & Charging
When the robot vacuum is working, press the Button to pause the task, and
press the Button again to send the robot vacuum to return to the dock to
charge.
When the robot vacuum is in standby mode and not connected to the charging
dock, press the Button to send the robot vacuum to return to the dock to
charge. When a task is complete or the Battery is too low, the robot vacuum
will automatically return to the dock to charge.
DND Mode
In the do not disturb (DND) mode, the robot vacuum does not perform
scheduled cleanups, and the indicator turns off a·er one minute of charging.
The DND mode can be enabled or disabled in the app.
Note: For more functions, please go to the app.
Note: When using the robot vacuum for the first time, it is recommended to follow the robot vacuum and remove any obstacles on the ground. If the robot vacuum may get stuck or scratch the surface of the furniture in some areas, you can set physical barriers to prevent the robot vacuum from entering those areas.
Care & Maintenance
2-in-1 Dust Compartment with Water Tank and Filter
- Take out the 2-in-1 dust compartment with water tank and open its cover. Remove any debris and clean the 2-in-1 dust compartment with water tank with the cleaning brush.
-
CAUTIONS:
* Do not rinse or soak the 2-in-1 dust compartment with water tank.
* Regularly clean the 2-in-1 dust compartment with water tank to prevent dirt buildup. This will help maintain optimal performance.
- Remove the filter and clean it with the cleaning brush.
-
Note: The filter can be rinsed with water. Make sure it is completely dry before reinstalling. Frequent rinses are not recommended.
Mop Pad
Remove the mop pad from the mop ad holder. Wash it and let it air dry.
Sensors and Charging Contacts
It is recommended to clean sensors and charging contacts every three months
with a so· cloth.
Brush and Side Brush
- Remove the side brush.
- Remove the brush cover, take out the brush, and pull out the brush bearing.
- Use the cleaning brush to clean.
Cleaning the Brush
Cut the hair
Remove dirt and debris
Components | Maintenance Frequency | Replacement Frequency |
---|---|---|
Side brush | Every two weeks | Every 3–6 months |
Brush | Weekly | Every 6–12 months |
Filter | Weekly | Every 3–6 months |
Brush cover | / | Every 3–6 months (or upon worn) |
Mop pad | A·er each use | Every 3–6 months (or upon worn) |
Common Issues
Issues | Possible Causes and Solutions |
---|---|
The robot vacuum does not turn on. | The baery level is low. Fully recharge the |
robot vacuum, then try again. The ambient temperature is too low (below 0°C)
or too high (above 35°C).
The robot vacuum does not start cleaning.| The baery level is low. Fully
recharge the robot vacuum, then try again.
The robot vacuum does not resume cleanup.| Make sure the robot vacuum is not
set to DND mode, which will prevent the robot vacuum from resuming cleanup.
The robot vacuum does not resume cleaning when it is manually returned to the
dock to charge or placed onto the charging dock.
The robot vacuum does not return to the charging dock.| There are too many
obstructions around the charging dock. Place the charging dock in a more open
area. The robot vacuum is too far away from the charging dock. Move it closer
to the charging dock and try again.
The robot vacuum does not charge.| Make sure there is enough open space around
the charging dock and its charging contacts are free of dust and other debris.
The ambient temperature is too low (below 0°C) or too high (above 35°C).
The robot vacuum has an abnormal behavior.| Turn the robot vacuum off and
then restart it.
The robot vacuum does not perform scheduled cleanups| Make sure the robot
vacuum is connected to the network; otherwise, it cannot synchronize time and
perform the scheduled cleanups. Make sure the robot vacuum is not set to DND
mode. The DND mode will prevent the robot vacuum from performing scheduled
cleanups.
The robot vacuum keeps going offline.| Make sure the robot vacuum is connected
to the network and stays in the range of Wi-Fi at all times.
The robot vacuum makes strange noises while cleaning.| A foreign object might
be caught in the brush, side brush, or the le·/right wheel. Turn off the robot
vacuum and remove any debris.
The robot vacuum no longer cleans efficiently, or leaves dust behind.| The
2-in-1 dust compartment with water tank is full. Please clean it. The filter
is blocked, please clean the filter. A foreign object has been caught in the
brush. Please clean the brush.
Troubleshooting
When the robot vacuum encounters a problem, it may play a voice prompt.
Please refer to the information below to resolve the corresponding issue.
Error Messages | Possible Causes and Solutions |
---|---|
Please make sure the 2-in-1 dust compartment with water tank is installed. |
Make sure the 2-in-1 dust compartment with water tank is securely installed.
Please make sure the mop pad is installed.| Make sure the mop pad holder and
mop pad are securely installed.
Please move the robot vacuum to a level surface to start.| The robot vacuum is
tilted at startup. Move the robot vacuum to a horizontally level surface and
restart it. You can also reset the level of robot vacuum in the Mi Home/Xiaomi
Home app, and then restart it.
Please return the robot vacuum to the dock to charge.| The robot vacuum cannot
return to the dock to charge. Place the robot vacuum onto the charging dock
and check whether the charging dock is connected to power.
Please help remove the obstacles around the robot vacuum and try again.| The
robot vacuum may be caught or stuck. Clear away any obstructions around it.
Please wipe the cliff sensor clean and move the robot vacuum to a new location
to start.| Part of the robot vacuum may be off the ground. Re-position the
robot vacuum and restart it. This error may also occur if the cliff sensor is
dirty. Wipe off the dirt from the cliff sensor.
Please clear any foreign objects from the collision sensor.| The collision
sensor may be stuck. Gently tap it several times to remove any foreign
objects. If nothing falls out, move the robot vacuum to a different place and
restart it.
Specifications
Robot Vacuum
Name Robotic Vacuum Cleaner
ModelP : B112
Rated Voltage : 14.4 V
Rated Power : 35 W
Charging Voltage : 20 V
Item Dimensions : »325 × 80 mm
Battery Capacity : 2500 mAh (rated capacity)
2600 mAh (nominal capacity)
Net Weight : 3.2 kg
Wireless Connectivity : Wi-Fi IEEE 802.11b/g/n 2.4 GHz
Bluetooth : 4.2
Operation Frequency : 2412–2472 MHz
Maximum Output Power : < 20 dBm
Power Supply
Manufacturer : Zhongshan Baolijin Electronic Co., Ltd.
Model : BLJ15W200060P-VA
Input : 100–240 V~ 50/60 Hz 0.5 A
Output 20.0 V : 0.6 A 12.0 W
Average Active Efficiency : 82.96%
Efficiency at Low Load : (10%) 60%
No-load Power Consumption : 0.10 W
Power Supply
Manufacturer : Dongguan Aoyuan Electronics
Technology : Co., Ltd.
Model : AY24CA-AF2000602-EU
Input : 100–240 V~ 50/60 Hz 0.8 A
Output : 20.0 V 0.6 A 12.0 W
Average Active Efficiency : 82.96%
Efficiency at Low Load (10%) : 72.96%
No-load Power Consumption : 0.10 W
- This product is compatible with two types of power supplies, both of which meet the requirements of product standards. The power supply included in the package, with a model of either BLJ15W200060P-VA or AY24CA-AF2000602-EU, will be shipped randomly.
Regulatory Compliance Information
EU Declaration of Conformity
Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type
B112 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.mi.com/global/service/support/declaration.html
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment
and human health. Please contact the installer or local authorities for more
information about the location as well as terms and conditions of such
collection points.
WARRANTY NOTICE
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY HAVE OTHER RIGHTS CONVEYED BY LAWS OF YOUR COUNTRY, PROVINCE OR STATE. INDEED, IN SOME COUNTRIES, PROVINCES OR STATES, CONSUMER LAW MAY IMPOSE A MINIMUM WARRANTY PERIOD. OTHER THAN AS PERMITTED BY LAW, XIAOMI DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU MAY HAVE. FOR A FULL UNDERSTANDING OF YOUR RIGHTS WE INVITE YOU TO CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE.
-
LIMITED PRODUCT WARRANTY
XIAOMI warrants that the Products are free from defects in materials and workmanship under normal use and use in accordance with the respective Product user manual, during the Warranty Period.
The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi’s official website : https://www.mi.com/en/service/warranty/.
Xiaomi warrants to the original purchaser that its Xiaomi Product will be free from defects in materials and workmanship under normal use in the period mentioned above.
Xiaomi does not guarantee that the operation of the Product will be uninterrupted or error free.
Xiaomi is not liable for damages arising from non-compliance with the instructions related to the use of the Product. -
REMEDIES
If a hardware defect is found and a valid claim is received by Xiaomi within the Warranty Period, Xiaomi will either (1) repair the product at no charge, (2) replace the product, or (3) refund the Product, excluding potential shipping costs. -
HOW TO OBTAIN WARRANTY SERVICE
To obtain warranty service, you must deliver the Product, in its original packaging or similar packaging providing an equal degree of Product protection, to the address specified by Xiaomi. Except to the extent prohibited by applicable law, Xiaomi may require you to present proofs or proof of purchase and / or comply with registration requirements before receiving warranty service -
EXCLUSIONS AND LIMITATIONS
Unless otherwise stipulated by Xiaomi, this Limited Warranty applies only to the Product manufactured by or for Xiaomi and identifiable by the trademarks, trade name or “Xiaomi” or “Mi” logo.
The Limited Warranty does not apply to any (a) Damage due to acts of nature or God, for example, lightning strikes, tornadoes, flood, fire, earthquake or other external causes; (b) Negligence; (c) Commercial use; (d) Alterations or modifications to any part of the Product; (e) Damage caused by use with non- Xiaomi products; (f) Damage caused by accident, abuse or misuse; (g)
Damage caused by operating the Product outside the permied or intended uses described by Xiaomi or with improper voltage or power supply; or (h) Damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Xiaomi.
It is your responsibility to backup any data, so·ware, or other materials you may have stored or preserved on the product. It is likely that the data, so·ware or other materials in the equipment will be lost or reformaed during the service process, Xiaomi is not responsible for such damage or loss.
No Xiaomi reseller, agent, or employee is authorized to make any modification, extension, or addition to this Limited Warranty. If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.
Except as prohibited by laws or otherwise promised by Xiaomi, the a·er-sales services shall be limited to the country or region of the original purchase.
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
The present warranties do not apply in Hong Kong and Taiwan. -
IMPLIED WARRANTIES
Except to the extent prohibited by applicable law, all implied warranties (including warranties of merchantability and fitness for a particular purpose) will have a limited duration up to a maximum duration of this limited warranty. Some jurisdictions do not allow limitations on the duration of an implied warranty, so the above limitation will not be applied in these cases. -
DAMAGE LIMITATION
Except to the extent prohibited by applicable law, Xiaomi shall not be liable for any damages caused by accidents, indirect, special or consequential damages, including but not limited to loss of profits, revenue or data, damages resulting from any breach of express or implied warranty or condition, or under any other legal theory, even if Xiaomi has been informed of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of special, indirect, or consequential damages, so the above limitation or exclusion may not apply to you. -
XIAOMI CONTACTS
For customers, please visit the website: https://www.mi.com/en/service/warranty/
The contact person for the a·er-sale service may be any person in Xiaomi’s authorized service network, Xiaomi’s authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.
References
- Xiaomi Indonesia
- Il motore di ricerca per risparmiare sui tuoi acquisti | Trovaprezzi.it
- שיאומי היבואן הרשמי בישראל Xiaomi Israel
- Xiaomi UK | Mobile Phone | Xiaomi Official Website
- Support - User Guide | Xiaomi Global
- Xiaomi Global Home
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>