FOSCAM V8EP 4K/8MP Outdoor POE IP Security Camera User Manual
- June 17, 2024
- FOSCAM
Table of Contents
FOSCAM V8EP 4K/8MP Outdoor POE IP Security Camera User Manual
Overview
Key Features
-
8MP UHD Waterproof IP Camera
-
H.264+/H.264 video Compression
-
Supports Human detection, Motion Detection and Vehicle Detection
-
Compatible with free Foscam Video Management Software
-
Compatible with free Foscam iOS and Android APP
-
Supports PoE Function
-
Supports Full Duplex two-way Audio
-
Supports HDR
-
Supports 256GB Micro SD Card storage(External)
-
Night Vision Range up to 20m(66 feet)
-
P2P Feature for Easy Remote Access
-
Supports image snapshot
-
Supports dual-stream
-
Supports remote viewing & record from anywhere anytime
-
Multi-level users management with password protection
-
Supports multiple network protocols: IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
Supports Alexa -
Supports Google Assistant
PoE
The Network Camera is PoE-compliant, allowing transmission of power and data
via a single Ethernet cable.Such as the following picture: connect the Network
Camera to a PoE enablerouter / switch via Ethernet cable.
Read before Use
Please first verify that all contents received are complete according to the
Package Contents listed below. Before the Network Camera is installed, please
carefully read and follow the instructions in the Quick SetupGuide to avoid
damage due to faulty assembly and installation. This also ensures the product
is used properlyas intended.
Packing Contents
| ● Camera× 1 | ● Ethernet Cable× 1 |
|---|---|
| ● Quick Setup Guide × 1 | ● Expansion Screws× 1 |
| ● Waterproof Lid × 1 | ● Mounting Template × 1 |
| ● Surveillance sign× 1 |
Physical Description
**Front Panel
Interface
1. LAN
10/100M adaptive Ethernet interface. Through this interface, IP camera can
be connected with various networkdevices, such as hub, router, et
Power Interface**
Connect the external power adapter, request for 12V / 1A power.
SD Card Management
This camera supports Micro SD Card. When you plug in the SD card during the
camera work process, please reboot the camera again, or else theSD card might
not work well.
On Foscam app go to the SettingsDevice StatusDevice Status page, you can see
the SD card status
Add Device: Connection via the Foscam App
Scan the QR code below to download and install the Foscam APP
Please refer to the Quick Setup Guide.
Installation
Please refer to the Quick Setup Guide
Point the camera at the desired location and use the screws provided to
mount it.
Please Note:
Ensure that rain or water will not reach the connector ports at the end of the
tailcable. These connectors arenot weather-resistant.
Waterproof Lid Installation Guide
-
When mounting your PoE camera outdoors, you are suggested to install the waterproof lid for it. You mayfollow the steps for installation.
1. Thread the Ethernet cable through the top cover and then the waterproof connector.
-
Put the rubber seal ring around the Ethernet cable between the top cover and the waterproof connector.
Note : The rubber seal ring provided has been cut. If not, you may manually cut it. -
Put on the rubber O-ring to the Ethernet port of the camera and plug the Ethernet cable into the Ethernetport
-
Align the waterproof connector with the Ethernet port, then twist it clockwise to tighten the two parts
-
Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it into positionfirmly to finish installation.
Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
Specification
| ITEMS | V8EP |
|---|---|
| Spotlight | Color Temperature |
| **Image Sensor** | Sensor Type |
| Display Resolution | 8.0Megapixels(3840*2160) |
| Min. Illumination | 0 Lux (With IR Illuminator) |
| Lens | Lens Type |
| Angle of view | Diagonal: 108.5°, Horizontal: 90.1°, Vertical 46.2° |
| **Video** | Image Compression |
| Resolution | 4K(3840*2160) 6M/20 |
fps,1080P(19201080)1M/25fps,720P(1280720)1M/15fps
Stream| Dual stream
Image Adjustment| The hue, brightness, contrast, saturation,
sharpness are adjustable
Flip Image| flip and mirror
Night Mode| Manual and automatic modes, when the white light is on, the
nightvision image is colored
| Night Visibility| With 4pcs IR-LED and spotlight, Night Vision Range up to
20m
---|---|---
**Audio| Input/Output| Built-in mic and speaker, supports full duplex
2-way Audio
Audio Compression| PCM/AAC
Siren| Support maximum 100dB alarm siren
****Network| Ethernet| One 10/100Mbps RJ45 port
Remote Access| P2P
Network Protocol| IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
System Requirements| Operating System| Microsoft Windows (Foscam VMS),
MacOS (Foscam VMS), Android(Foscam app), iOS (Foscam app)
****Other Features| Motion Detection| Alarm via E-Mail,
upload alarm snapshot to FTP
Human Detection| Alarm via E-Mail, upload alarm snapshot to FTP
Vehicle Detection| Alarm via E-Mail, upload alarm snapshot to FTP
User Accounts| Three levels user role
WDR| Improve image clarity in complex scenario
Zoom| 6X digital zoom function
Storage| Support max. 256GB Micro SD card, local and FTP storage, Foscamcloud
storage
Reset| Reset button is available
Intelligent Assistant| Supports Alexa, Google Assistant
****Power| Power Supply| DC 12V/1.0A (Not standard)
POE Standard| 802.3af
Power Consumption| 5 Watts (Max.)
Physical| Dimension(LxWxH)| 170(L)x66 (W)x66 (H)
Net Weight| 342g
****Environment| Waterproof| IP66
Operating Temperature| -20°C ~ 50°C (-4°F ~ 122°F)
Operating Humidity| 10% ~ 80% non-condensing
Storage Temperature| -20°C ~ 50°C (-4°F ~ 122°F)
Storage Humidity| 0% ~ 90% non-condensing
Certification**| FCC, CE, RoHS, IP66, UKCA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>