FOSCAM FN9108E-T4 8 Channel Network Video Recorder User Manual

June 1, 2024
FOSCAM

FOSCAM-logo

FOSCAM FN9108E-T4 8 Channel Network Video Recorder

FOSCAM-FN9108E-T4-8-Channel-Network-Video-Recorder-
image

Product Information

Specifications :

  • Models: FN9108E-T4, FNA108E-T4, FN9108E-B4, FNA108E-B4, FN9108H, FN9108HE, FNA108H, FNA108HE
  • Version: 1.2

Product Usage Instructions

Main Menu

The main menu of the NVR provides access to various functions such as configuration, preview, record, backup, network settings, HDD management, user settings, event logs, system restore, firmware upgrade, IPC configuration, and channel configuration.

Accessing the NVR in Foscam App

  1. Download the Foscam App from the app store.
  2. Create a Foscam account within the app.
  3. Add the NVR device to the Foscam App by following the on-screen instructions.
  4. Access the surveillance window within the app to view live feeds from the NVR.
  5. You can further customize settings under the “Setting” section in the app, including NVR information.

Frequently Asked Questions

  • Q: How do I reset my NVR to factory settings?
    • A: To reset the NVR to factory settings, navigate to the system settings and look for the “Restore” option. Follow the on-screen prompts to initiate the factory reset process.
  • Q: Can I add more cameras to the NVR?
    • A: Yes, you can add more cameras to the NVR by accessing the IPC configuration settings in the main menu. Follow the steps to add new cameras and ensure they are compatible with the NVR model.
  • Q: How can I update the firmware of my NVR?
    • A: To update the firmware of your NVR, go to the main menu and select the “Upgrade” option. Follow the instructions to download and install the latest firmware version provided by Foscam.

“`

NVR User Manual
Important Safety Instructions
This chapter describes how to use the product properly so as to prevent danger and property loss. Be sure to follow the security instructions when operating this product. The CR1220 model lithium battery is used inside the device. If other types of batteries are used, there is a danger of explosion. When replacing the battery, do not put the old battery into fire or handle it with household garbage. Please dispose of used batteries in accordance with local laws and regulations

www.foscam.com

V

NVR User Manual
Preface

Welcome to use our product, Network Video Recorder (NVR). This document mainly focuses on the installation and configuration of NVR application system. With high performance video, user-friendly GUI, and practical industrial designs. This series NVR is suitable for civil applications such as homes, stores, internet cafes, and small businesses in addition to mainstream security and surveillance applications.
Declaration
The feature of product on this manual is just for reference. Please prevail in physical product. The manual provides multiple product models for reference. The specific operations are not listed
one by one. Please follow the operations depending on the actual product. Because the actual environment may be discrepant, the actual values of some data may be different
from the values provided in the manual. If there are any question or dispute, the final interpretation of prevails. If you do not follow the manual during operation, you will bear any loss caused thereof.
Installation Environment
Precautions
Please keep the device horizontally and avoid inclination or inversion. Do not install the wireless NVR in humid and dusty environment. Put the wireless NVR in drafty environment in case of ventilation port being blocked. Don’t touch the power switch with wet hand or damp items to avoid shock. Do not splash liquid or metal filing on the NVR To avoid short-circuit fault or blaze. Explosion may happen because of improper replacement of battery, do not replace it by yourself; If
you need, make sure it is the same type of battery. And do not open or repair it. Do not take the device apart when it is operating (or connecting to power). Please use suitable and professional hard disk to ensure continues and stable recording.

www.foscam.com

VI

NVR User Manual
Lightning protection is needed when device is connected to communication cables. Ethernet cable which comes form outside, connecting to the wireless NVR directly is forbidden.
Check the power supply to avoid damage because of voltage mismatch. Make sure the wireless NVR working within suitable temperature and humidity environment.
Short circuit may occur when dust become wet on circuit board. Please clean the dust on circuit board, connectors, and NVR case.

www.foscam.com

VII

NVR User Manual

Overview

1.1 Product Introduction
This document introduces a series of NVR products, including: FN9108E-B4 Kit, FN9108E-T4 Kit, FNA108E-B4 Kit, FNA108E-T4 Kit, FN9108H, FN9108HE, FNA108H,FNA108HE. This advanced product series receives a high quality video stream that is transmitted digitally by the IP Camera (IPC). The product can perform live video preview, recording, playback, remote access, and backup simultaneously.
1.2 Key Features

Network Monitoring

You can access the NVR system remotely through the Video Management System (VMS) and Foscam APP, or access the NVR system locally by using the display or monitor.

Multi-screen Preview
Multi-screen preview indicates that several pages are displayed on the screen of the monitor based on the same scale.

Recording

The NVR supports recording and storing video files on a Hard Disk Drive (HDD). Stored videos files can be queried or played back through local GUI.

Recording can be classified into schedule recording, and alarm recording from low priority to high priority. If recording of any two types is enabled at the same time, only the recording of a higher priority takes effect.

Schedule recording You can select the scheduled time segment to enable or disable recording.
Motion detect recording After the motion detect is enabled and recording is selected, motion detect recording is enabled when motion detection is triggered in the detection time segment and detection area.
Alarm recording

www.foscam.com

1

NVR User Manual
After the Shelter is enabled and recording is selected, If the video is occluded, the video channel will have an alarm flag alert that triggers an alarm and alarm logging will be enabled.
Note
When NVR system time and IPC time are different, the NVR recording will based on the NVR system time.
Playback
You can play recording video files stored in the Hard disk. Recording includes schedule recording, manual recording, motion recording and alarm recording. Single-screen playback, four screens or nine screens synchronous playback are supported.
Alarm
Motion Detection Alarm, Human Detection Alarm and Vehicle Detection Alarm.(Human Detection Alarm and Vehicle Detection Alarm only supports FN9108E-B4 kit/ FN9108E-T4 kit) You can configure detection information about the corresponding channel in the NVR system. When an object moves in the detection time segment and detection area, an alarm is triggered, the NVR system enables detection recording, sends pictures to your mailbox.
Manage
You can search for IPC devices in the LAN through the NVR and add IPC devices to the NVR channel. Through the NVR, you can also manage IPC devices.
HDD Management
When the HDD becomes exceptional (for example, HDD Loss, HDD Full, and HDD Error), the NVR buzzer sounds an alarm. When the HDD is full, you can select the cycle cover the earliest recording or stop recording.

Note
Only FN9108E-B4-2T kit / FN9108E-T4-2T has a 2T hard drive installed at the factory.

Other Functions

Support the logging function.

Support local GUI output and perform shortcut operations through the mouse (left click to select,

right click to return to the previous menu).

www.foscam.com

2

NVR User Manual
Three roles can access the NVR, which are respectively visitor, operator, and administrator. The rights of the three roles vary from low to high.

1.3 Relevant Version

Name Monitor Network POE Standard

Recommended Configuration The maximum resolution of NVR support displays is 4K(3840×2160). 10/100M Ethernet or above. IEEE 802.3at/af

1.4 Hard Disk Installation
If your NVR is FN9108H,FN9108HE or FN9108E-B4-N, you must install the hard disk to the NVR. FN9108E-B4-2T kit has a 2T hard drive installed at the factory.
WARNING Before installing a hard disk drive (HDD), please make sure the power is disconnected from the
NVR. It is recommended that a hard drive be used in 7200 high-speed or above.
Step 1: Remove the cover from the NVR by unfastening the screws on the rear and bottom.

Step 2: Connect one end of the data cable and power cable to the motherboard of NVR and the other end to the HDD.

www.foscam.com

3

NVR User Manual
Step 3: Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD.
Step 4: Re-install the cover of the NVR and fasten screws.

1.5 NVR Rear Panel
FN9108HE/FNA108HE/FN9108E/FNA108E:

www.foscam.com

4

NVR User Manual FN9108H/FNA108H:

www.foscam.com

5

NVR User Manual

GUI

Please refer to the Quick Setup Guide if you install the NVR for the first time. You can visit the local NVR device via the display or monitor, and view or manage NVR system.
2.1 Before Starting
You need to know some basic information before you log on to the NVR system with the monitor or display.
2.1.1 Icons Description
In the live view mode, there are icons at the left top of the full screen. : The HDD is full, and the recording has been stopped. A HDD is not inserted into the NVR or the HDD connected to the NVR is abnormal.
In the live view mode, there are icons at the right bottom of the screen for each channel, : Human Detection Alarm. Identify whether someone is moving within the range of the camera.
Only FN9108E-B4 kit / FN9108E-T4 kit supports this function.
: Vehicle Detection Alarm. Identify whether vehicle is moving within the range of the camera. Only FN9108E-B4 kit / FN9108E-T4 kit supports this function.
: Motion Detection Alarm. The motion is detected during the detection time in the detection area, the NVR will alarm.
: NVR is recording for the IPC. : You can click this icon to control whether IPC records sound.
2.1.2 Common Operations

Starting Up the NVR

Turn on the power, The Power indicator LED should turn green indicating that the device begins to

start up.

www.foscam.com

6

NVR User Manual

Note
If the power LED indicator on the front panel is off, please check if the power supply is plugged into an electrical outlet.
Shutting Down the NVR
Proper ways to shut down the NVR in the GUI interface: After login, right- click the mouse, you can click Shutdown in the shortcut menu. Choose Shutdown, click the OK button in the confirmation box. Then turn off the power switch on the rear panel, the power LED indicator on the front panel turns off.

Note
Don’t turn off the power directly when you turning on.
Reset
You can reset the NVR device to restore the factory settings. You can choose any one of the following methods operate. Reset button: Press and hold it for 3 seconds to reset all parameters to factory defaults on the bottom of the NVR. Local GUI: Right-click the mouse, Choose Main Menu > Restore in the Menu interface, then choose to restore defaults in the Restore factory settings interface.

2.1.3 USB Mouse Operation

Plug USB mouse into one of the USB interfaces on the rear panel of the NVR.

The operation of the mouse on the local GUI is shown as below.

Name

Action

Description

Left-Click Single-Click

Menu or window: select and enter.

Double-Click

Preview mode or Playback mode: Switch between single-screen and multi-screen.

Click and Drag

Time or Area box: Select the time or zone range. Time bar: Drag time bar.

www.foscam.com

7

NVR User Manual Right-Click Single-Click

Live view: Moving channel arrangement order.
Live view: Show menu. Menu: Exit current menu to upper level menu.

Note
The Single-Click mentioned in this article is refer to the left mouse click.
2.2 Login
For your security, please set a new user name and password for your NVR before Log In.

Login page. Enter the Username and Password, then click on the OK button. You will be taken to the Setup Wizard.

www.foscam.com

8

NVR User Manual
2.3 Guide
By default, the Guide starts once the NVR has loaded. The Guide can walk you through some important settings of the NVR. If you don’t want to use the Guide at that moment, right click the mouse to quit. 1. Setting the system time, date format, language, resolution of the monitor and so on.
2. Format HDD. Click the Format button to set up the HDD. Note that this will delete all files on the HDD. HDD Full Setting. Select Stop Record or Overwrite.

Note

www.foscam.com

9

NVR User Manual
Only FN9108E-B4-2T kit and FN9108E-T4-2T has a 2T hard drive installed at the factory. 3. P2P.
If you want to know the UID of the device, please scan the QR code. If you don’t want to use the Setup Wizard next time, check Not show again checkbox. Click the Finish button to complete the setup wizard.

or Right-click Main Menu Conguration uncheck the Setup Wizard checkbox. Click the Finish button to complete the setup wizard.

Note
The P2P in this article is only an example, please refer to the actual situation.
You can also Right-click “Main Menu > Configuration”, uncheck the Startup Wizard checkbox.

www.foscam.com

10

NVR User Manual Click the Save button.
2.4 Shortcut Menu
After login, right-click the mouse, you will enter the shortcut menu.

Right-click in live view mode and select screen from the Shortcut Menu, you can choose 4-screen, 8-screen or 9 screens.

2.4.1 Channel Config

Channel Config
Right-click in live view mode and select Channel Config to enter the Channel Config interface, On this page you can see device status such as channel, Status, IP Address, MAC Address, Add IP Camera, Modify IP, Delete/Modify/move up/move down added device. You can add an IP Camera that is connected to the internet on the NVR. Step 1: Right-click on main interface, select Channel Config. Step 2: Select your IP Camera or Auto added IPC. Step 3: Click Add. Step 4: Enter username and password of the camera. If your camera is in the factory default state, you do not need to enter the user name and password. Step 5: Click OK.

www.foscam.com

11

NVR User Manual

Note: If the camera is added during factory default status, the username and password will be the same as the NVR. Select a protocol depending on which IP Camera you have. FOSCAM protocol: The High Definition (HD) IP Cameras for Foscam. ONVIF protocol: IP Cameras which support ONVIF protocol.
2.4.2 Main Menu
Right-click in live view mode and select Main Menu to enter the Main Menu interface, it includes Configuration, Display, Record, Backup, Network, HDD, User, Event, Restore, Upgrade, IPC Config, please refer to 2.5 Main Menu.
2.4.3 Playback
You can display the video of every a channel for playback. Right-click in live view mode and select Playback to enter interface. It supports single-screen, four screens or nine screens. On this page you can view the record files stored in the hard disk.

www.foscam.com

12

NVR User Manual

1. Select a date with recording in calendar.

2. Check the checkbox from Channels. You can select up to nine channels for playback at the same

time.

Manage the recording

Button

Description

After select the matched recorded file, click the button to play or pause. /

Stop
Single Frame
Fast backward. The fast backward speed can be 4 times, 8 times or 16 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the lower right of the fast backward icon. For example,
indicates the current fast backward speed is four times of the normal speed.
Fast forward. The fast forward speed can be twice, 4 times, 8 times or 16 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the lower right of the playback page. For example,
indicates the current playing speed is four of the normal

www.foscam.com

13

NVR User Manual speed. Audio
Backup. Click this button and you will go to the backup page Cut. See below the table for details. Log. Click this button and you will go to the log page. Full Screen
Cut
Step 1: Click , you will go to the Cut interface. Step 2: Choose the Channel, Type, Date. Step 3: Click Search to find the recordings available. Step 4: Select Add Flag, then double-click left mouse to select the start time and end time. Step 5: Insert USB flash drive to the USB port located at the rear of your NVR. Step 6: Click Backup button to save the video information to the USB flash drive. Tips are available after the backup is complete

www.foscam.com

14

NVR User Manual
2.4.4 Record
After the IP Camera is added successfully to the NVR, enable Scheduled Record functionality to the following methods when in the Live View mode.
2.4.4.1 Scheduled Record
Right-click Main Menu Record choose recording channel Save (Actually, the NVR system have default set 24h scheduled recording).

In the Live View mode, the icon indicating recording is on going.

is at the bottom right of the screen for each channel,

2.4.4.2 Event Record

If you want to start event recording, select Event in Type, use the left mouse button to select the time (turned to green), if the other channels operate in the same way, select Copy.

www.foscam.com

15

NVR User Manual

Note: The default alarm type is Motion Detect. In the Live View mode, the icon is at the bottom right of the screen for each channel, indicating recording is on going,and di- erent icons indicate different detection.
: Motion detection
: Human detection
: Vehicle detection If you want to check the record, right-click in live view mode and select “Main Menu > Playback”. Choose channel and date, then click timeline to check record. Set the event alarm according to the following methodRight-click Main Menu Event Motion Detect choose target channel, setting Schedule, Delay, Record Channel, Tour, PTZ Activation, Send Email Buzzer Save.

www.foscam.com

16

NVR User Manual

2.4.5 Backup
Insert USB flash drive to the USB port located at the rear of your NVR. Right- click in live view mode select Backup to enter the Backup interface. Step 1: Choose channel, type and time. Step 2: Click Search button. Step 3: Select target file. Step 4: Click Backup button to finish backup.
Note
If target file can not be searched out, please click empty to add. Please remove the files which is no need before backup. Ensure insert device (like USB) in 30 second, as system reserved searching time for it is 30 second.

www.foscam.com

17

NVR User Manual
2.4.6 PTZ Control
NVR can operate the lens steering of IPC, which must support PTZ function.
2.4.7 IPC Config
Right-click in live view mode and select IPC Config to enter the IPC Config-1 interface. You can set the Image, OSD, Encode, Advanced, Maintenance for the IPC.
Image
Choose Image to enter the Image interface, On this page you can adjust the image color mode of the monitor channel.

www.foscam.com

18

NVR User Manual
Encode
Choose Encode to set the information for the main stream and the sub stream.
Note
You can choose to configure mainstream/sub stream information based on the network environment.

Advanced
Step 1: Choose Motion Detection. Step 2: Set Sensitivity, Low, Middle, High. Step 3: Click on the setting button, set alarm area. Step 4: Set Night Vision, default to Auto. Step 5: Set up Vehicle, Human body, White light, and Sound and Light alarm linkage according to your own needs. Step 6: Click Apply button.

www.foscam.com

19

NVR User Manual

Upgrade
Step 1: Download the rmware to the U disk. Step 2: Insert U disk to NVRUSB port. Step 3: click Refresh. Step 4: click Upgrade to upgrade your camera.

www.foscam.com

20

NVR User Manual
Restore
Step 1: Choose Restore factory settings. Step 2: click Apply to restore factory settings your camera.

www.foscam.com

21

NVR User Manual
2.4.8 Info
Right-click in live view mode and select “Info > log”, you can search the log information of the NVR. The log record shows recording time and accessed information. If you want to back up the log information, please insert USB flash drive to the USB port located at the rear of your NVR, and then click the Backup button.
Right-click in live view mode and select “Info > Version”, you can view the version information of the NVR.

Note
The data in the figure is only an example, please refer to the actual situation.

www.foscam.com

22

NVR User Manual
2.4.9 Shutdown
Right-click in live view mode select Shutdown to enter the Shutdown interface. You can restore, logout, reboot or shutdown the NVR system.
Click Restore,The Restore factory settings interface is displayed. You can check some information to restore the factory settings, as shown in the figure below.

Note
Each model is slightly different, please refer to the actual interface.
2.5 Main Menu
Right-click in live view mode and select Main Menu from the Shortcut Menu, the Main Menu interface is displayed.

www.foscam.com

23

NVR User Manual

2.5.1 Configuration
Right-click in live view mode and select “Main Menu > Configuration” in the Main Menu interface. The Configuration interface is displayed. You can set the system time, date format, language, resolution of the monitor and so on.

If you don’t want to display the startup wizard every time you turn it on, please uncheck the Startup

Wizard checkbox.

www.foscam.com

24

NVR User Manual
2.5.2 Preview
Preview
Right-click in live view mode and select “Main Menu > Preview” in the Main Menu interface. The Preview interface is displayed. You can set the Channel Title, Time Title, Channel Title, Record Status, Alarm Status.

Cycle
Right-click in live view mode and select “Main Menu > Preview > Cycle” in the Main Menu interface. The Cycle interface is displayed.
After the user sets the cycle function, NVR will play several channels of video on the display at the same time according to the interval time set by the user. After each channel plays for a few seconds, it will automatically jump to the next group of channels for cyclic playback. Step 1: Check the Enable. Step 2: Set the Event Interval(sec). Step 3: Click the add button to select which channel videos can be played within each group. Step 4: Click Save button.

www.foscam.com

25

NVR User Manual

2.5.3 Record
Right-click in live view mode and select “Main Menu > Record” in the Main Menu interface. The Record interface is displayed. Choose recording channel, click Save button. (Actually, the Wi-Fi NVR system have default set 24h scheduled recording).

If you want to modify it to alarm recording, please use the left mouse button to select the time (turned to green), if the other channels operate in the same way, select copy.

www.foscam.com

26

NVR User Manual
2.5.4 Backup
Step 1: Insert USB flash drive to the USB port located at the rear of your NVR. Step 2: Right-click in live view mode and select “Main Menu > Backup” in the Main Menu interface.
The Backup interface is displayed. Step 3: Choose channel, type and time, Click Search button. Step 4: Select target file. Step 5: Click Backup button.

www.foscam.com

27

NVR User Manual
Note
If target file can not be searched out, please click Empty Add. Please remove the files which is no need before backup. Ensure insert device (like USB) in 30 second, as system reserved searching time for it is 30 second.
2.5.5 Network
Right-click in live view mode and select “Main Menu > Network” in the Main Menu interface. The Network interface is displayed.
Note
The UID information here is only an example, please refer to the actual device. There are two ways for NVR to connect to Internet. DHCP: Select DHCP from the Network Type, the device will connect to Internet automatically, no need data setting. Note: The NVR DHCP server will open if it does not detect and connect a router within the 30s, which is used for searching and connecting to the IPC on the PoE NVR or switch.If a router is connected at this time, the NVR cannot be found when adding it by APP or VMS, and the NVR needs to be restarted. Remarks: Users can customize the startup time or close of the NVR DHCP server. Manual setting: Select STATIC from the Network Type, fill in IP address, DNS data, and so on, click
Save button. If user doesn’t familiar about the network environment, please prefer use DHCP first.

www.foscam.com

28

NVR User Manual
Click Setting in P2P, you can scan the UID of the device through the app, add and remotely manage the device.

Click Setting in Email, you can set Email information.

www.foscam.com

29

NVR User Manual Click Setting in Advanced, you can set PPPOE, DDNS, DHCP Sever.

2.5.6 HDD
Right-click in live view mode and select “Main Menu > HDD” in the Main Menu interface. The HDD interface is displayed. When the HDD is full, you can select the cycle cover the earliest recording or stop recording. You can set the video storage time.

www.foscam.com

30

NVR User Manual Click the Format button, you can also format the hard drive.

2.5.7 User
Right-click in live view mode and select “Main Menu > User” in the Main Menu interface. The User interface is displayed. You can add user, delete user, modify user and change password.

Add User

Click Add User to enter the Add User interface, On this page you can add to user, user password and Authority Option.

www.foscam.com

31

NVR User Manual

Modify User Click Modify User to enter the Modify User interface, On this page you can change user password and authority option. Delete User Click Delete User button to delete a user. Change Pwd Click Change Pwd button to change password.
2.5.8 Event

Motion Detect
Right-click in live view mode and select “Main Menu > Event” in the Main Menu interface. The Motion Detect interface is displayed. On this page you can setting Channel, Scheduled, Delay and Event Trigger mode. Set the event alarm according to the following method: Step 1: Choose target channel. Step 2: Setting Schedule and Delay.

www.foscam.com

32

NVR User Manual Step 3: Select the Event Trigger. You can choose the following alarm triggering methods: Record Channel, Tour, PTZ Activation, Send Email, Buzzer. If you want to set other channels to be the same, you can select the “Copy To” , then click Copy button. Step 4: Click Save button to take effect.
Video Loss
Click Video Loss to enter the Video Loss interface. When there is no video in the channel, the NVR alarm function is triggered. On this page you can setting Channel, Schedule, and Event Trigger.

www.foscam.com

33

NVR User Manual
If you want to set other channels to be the same, you can select the “Copy To” , then click Copy button.
2.5.9 Restore
Right-click in live view mode and select “Main Menu > Restore” in the Main Menu interface. The Restore factory settings interface is displayed. On this page you can choose which you can restore the factory settings.

2.5.10 Upgrade
You can upgrade your NVR system with local Software. Step 1: Download the firmware to the USB flash drive. Step 2: Insert USB flash drive to the USB port located at the rear of your NVR. Step 3: Right-click in live view mode and select “Main Menu > Upgrade” in the Main Menu interface. Step 4: Click Refresh button in the Upgrade interface. Step 5: Select the firmware from the USB flash drive. Step 5: Click Upgrade to upgrade your NVR.

www.foscam.com

34

NVR User Manual

Note
Don’t shut down the power during upgrade. After upgrading, NVR restarts.
2.5.11 IPC Config
Right-click in live view mode and select “Main Menu > IPC Config”, you can set the Image, OSD, Encode, Advanced, Maintenance for the IPC. For detailed operation, please refer to 2.4.7 IPC Config.
2.5.12 Channel Config
Right-click in live view mode and select “Main Menu > Channel Config” to enter the Pair IP Camera interface . please refer to 2.4.1 Channel Config.

www.foscam.com

35

NVR User Manual

Access the NVR in Foscam App

3.1 Download the Foscam APP
Please refer to the Quick Setup Guide if you install the NVR for the first time. You can start to learn about software operation after finish quick installation. Scan the QR code below to download and install the Foscam APP.
3.2 Create A Foscam Account
You can create a Foscam account for the first time. Run the Foscam APP, and then register for a Foscam account. Step 1: Click Foscam app icon to enter the login page. Click Sign Up to create account.

Step 2: You need to choose your region, then enter the mailbox name and new password. Step 3: Check Accept Privacy Notices and Terms of Service, and click Sign Up.

www.foscam.com

36

NVR User Manual

Step 4: The system will send activation information to your mailbox, and you need to log in to your mailbox to activate your account.
3.3 Add Device in Foscam App
Open the foscam APP and please sign in if you have one already. After logging into Foscam APP, select “+” icon on the upper right corner. The Add Devices interface is displayed.
Note
Please make sure that the NVR and your phone are both in the same Local Area Network (LAN).

You have the following methods to add devices.

Select “Scan the QR code” and scan the QR code that labeled at the bottom of your NVR.

www.foscam.com

37

NVR User Manual
Select “Search in LAN” to search for the device. Select “Others”, You can manually add device information in three ways: UID/DDNS/IP
Address.

Note
Neither FN9108E-B4 kit/ FN9108E-T4 kit nor FN9108H/9108HE supports DDNS connection.
After the addition is successful, NVR video will be displayed in the Foscam app.

3.4 Foscam APP Surveillance Window

You can start to learn about software operation after finish quick installation.When you

launch the Foscam App, the devices page displays.

Split Screen

Add Device

Watch Live

Menu

Click

button, you can watch the live interface of 4 devices.

Tap Live

to view and listen to a live video.

3.5 Watch Live

Click device in list to enter preview interface, select a channel to view it’s picture, as follow shows:

www.foscam.com

38

NVR User Manual
Back

Setting Date

Resolution
Snapshot Video

Full screen Bit Rate

Mirror
Back: To stop viewing and listening to the live feed, tap the Back. Resolution: There are two types to identify different streams you have set. If select the QHD Mode, the clearer video will become, and it will take up more bandwidth; If select the SD Mode, the video will not be as clear as QHD Mode, and it will take up less bandwidth. If you want to catch the smaller details, pinch and drag any image as you do with photos on your smart phone. SnapshotClick this button to Snapshot the image. VideoClick this button to start the recording function. Setting: Click this button to set more. DateDisplay the date. Full screen: Click this full screen button, you can live in full screen. Bit Rate: You can see the current connection bit rate. Mirror: You can flip the image horizontally/vertically with this button.

www.foscam.com

39

NVR User Manual
3.6 Setting

Tap

the button, goes to Settings to make advanced NVR settings.

3.6.1 NVR Info
You can modify the NVR name. You can also see the basic information of the NVR through this, such as NVR model, UID, MAC ID, NVR firmware version information, IPC firmware version information.

Note
The data in the figure is only an example, please refer to the actual situation.

www.foscam.com

40

NVR User Manual
3.6.2 NVR Firmware
You can see the current NVR’s firmware version and whether there is new software that needs to be upgraded. If there is new firmware, you can click the “Upgrade” button to upgrade.
3.6.3 Camera Firmware
You can see the current camera’s firmware version and whether there is new software that needs to be upgraded. If there is new firmware, you can click the “Upgrade” button to upgrade.
3.6.4 Recording Playback
You can query the recording playback content according to the time, type, and channel.

3.6.5 Hard disk information
When the HDD is full, you can check the Loop Coverage to select the cycle cover the earliest. You can see the HDD information of the NVR. You can format the hard information by clicking the Format the hard disk button.

www.foscam.com

41

NVR User Manual
3.6.6 Reboot NVR
Click Reboot NVR to reboot the NVR. This is similar to unplugging the power to the NVR.
3.6.7 Delete NVR
You can click Delete NVR button to delete the NVR from the app, or delete and keep history files from the app.

www.foscam.com

42

NVR User Manual

Surveillance Software Foscam VMS

Foscam VMS is a new tool for PC. It does not require plug-ins and is compatible with Windows & Mac, It supports all Foscam HD cameras and up to 36 cameras at the same time. It is recommended that you first use the cloud account registered by the Foscam app, and then use the local account.
4.1 Software Installation

  1. Double click the software and follow the setup wizard to install the program.

  2. The FoscamVMS icon will appear on the desktop automatically after a successful installation.

Note: Sometimes the program will be treated as virus, so before installing, please add the software as trusted program on your computer.

www.foscam.com

43

NVR User Manual
4.2 Create A Local Account

Local with Foscam Account Click the “Local with Foscam Account” button and you will create a local account to manage your camera.

www.foscam.com

44

NVR User Manual
Login with Local Account Click the “Login with Local Account” button, and you will need to use the Foscam account and password to log in, which is consistent with the Foscam app account.

4.3 Add Device
If your NVR is wired connect, you can choose the following method to add to Foscam VMS.

www.foscam.com

45

NVR User Manual
4.3.1 LAN Add

Click Add Device button, then follow below steps: Step1 Select “ALL” from the device types. Step2 Click the IP address of the NVR on the list, then the name of the NVR and the IP information
will be entered automatically.
Step 3 Click Add.

www.foscam.com

46

NVR User Manual Step 4 Enter the username and password of the NVR.
Step 5 Click Add button to finish adding.

4.3.2 Manual add
You can add the NVR use manual add. Step 1 Click Manual add first.

www.foscam.com

47

NVR User Manual

Step 2 There are three ways to connect mode, you can choose any one. Check UID from Connection mode. Enter the UID of the device.

Check IP address from the Connection Mode. Enter the IP and Port of the NVR. Select NVR from the Device types.

www.foscam.com

48

NVR User Manual

Step 3 Click Add button. Step 4 Enter Device account and Password of the NVR.
Step 5 Click Add button to finish adding device.

www.foscam.com

49

NVR User Manual
4.4 Surveillance Software GUI

1

3

2

4

5

First time you login the software, the whole video window is gray, you need to connect the NVR and add NVR to it.
Section1 Menu Bar
Path to surveillance window. Click this button enter to Device List and back to the surveillance window.

Playback the video recording, you can choose Cloud Playback, SD Card Playback, NVR HDD Playback or Local Playback.

Login your Foscam cloud account to view alerts. Login your Foscam cloud account.

Add Device, please refer chapter 4.3 Add Device for the detail setting.

More, You can Setting Personal Account, Preference, My coupon, Log Query, Left

www.foscam.com

50

NVR User Manual

Bar and Switch Account.
Section2 Left Bar

Add Group: Click the your needs.

button, you can group the device list according to

Left Bar of Live: You can view the list of connected NVR.

Select the icon

on the right side of the NVR list to do the following.

1 2 3 4 5
1—–Reconnect Click Reconnect button and the device will reconnect. 2—– Move To Click this button, you can move the device to your group list. 3—–NVR HDD Playback If you have an HDD on your device, click this button to enter the NVR HDD Playback. You can query the recording information of the hard disk by channel, record type, and date of record.

www.foscam.com

51

NVR User Manual

4—–Delete Click the button, Delete the device. 5—– Setup Click Setup button, goes to Device Settings Control Panel to make advanced NVR settings.
Section3 Live Window
When the mouse is placed on the video, the icon shown on the following figure appears.
1
1

2

1—–Close

3

2 Click the icon to close this channel live window 3

2—–Device Name

Show view channel and camera name.

www.foscam.com

4
4
52

NVR User Manual 3—–Recording and Alarm status This icon will turn to red, it indicates that the camera is recording 4—– Record / Snap Shot / Sound
Record Snap Shot Sound Record —– Click it and do manually recording. When recording, icon 1 will turn to blue. Click it again and stop recording. The recording files will be stored to C:VMS_RECORD automatically. Snap Shot —– Click it to make snapshot. After snapshot, the button banner will prompt Captured Successfully. And you can find the picture on default path C:VMS_CAPTURE.

Sound —– Click the icon then you will hear sound captured by the camera’s built-in microphone. You may need to plug in earphones or enable the computer speakers to hear from the camera’s microphone. Make sure the camera supports audio. Click again and stop audio.
Section4 The number of split-screen
Click this button to select the number of split-screen on one page.

The client can monitor many cameras at one page, here you can choose the display number. The maximum number is 16.
Section5 Live Cruise / Close All / Full Screen / Hide Bar

Live Cruise —– Click this button to Live Cruise, you can click

button to add a

loop page for live Cruise or click www.foscam.com

button to reduce the loop page for live Cruise.
53

NVR User Manual

Close All —– Click this button to close all the cameras Full Screen —– Click this button to enter full screen, then click to exit full screen.
Hide Bar —– Click this button, Hide and show Pan / Tilt control Bar
4.5 Setup

Select the icon

on the right side of the NVR list to do the following. Click Setup button,

goes to Device Settings control panel to make advanced NVR settings.

4.5.1 Basic

Device Information
You can modify the device name. You can also see the basic information of the NVR.

Device name: The Device Name is a unique name that you can give to your device to help you identify it. You can define a name for your NVR here such as NVR1. Click Save to save your changes. The alias name cannot contain special characters.

www.foscam.com

54

NVR User Manual
System firmware version: Display the system firmware version of your NVR. Application firmware version: Display the application firmware version of your NVR. MAC ID: Display the MAC address of your NVR. For example Device ID is 0049838BFD2D, the same MAC ID sticker is found at the bottom of the NVR.
Device time
This section allows you to configure the settings of the internal system clock for your camera. You can set the time zone, device time, date format.

Time zone: Select the time zone for your region from the drop down menu.
Synchronize time to the device: After checking the Synchronize time to the device checkbox, you can set the device time, or click the Sync with PC/terminal button to synchronize the PC/terminal time to your device.
Sync with NTP server: Network Time Protocol will synchronize your device with an Internet time server. Choose the one that is closest to your device.
Use DST: Select the use DST (Daylight Saving Time, to set the clock ahead of the real-time), then set the start time and end time of the DST, select the daylight saving time from the drop-down menu at last.
Click Save button and submit your settings.

www.foscam.com

55

NVR User Manual
IP
If you want to set a static IP for the device, please go to IP page. Keep the device in the same subnet of your router or computer.

It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you don’t know the subnet mask, gateway and DNS server, you can check your computer’s local area connection as follows:
Settings–Network & internet–Ethernet –Edit–Edit IP Settings.

www.foscam.com

56

NVR User Manual

www.foscam.com

57

NVR User Manual

Click here
Set the same Sub net Mask and gateway of the camera with your pc

If you don’t know the DNS server, you can use the same settings as the Default Gateway.

Port

This device supports HTTP Port / HTTPS Port Port. HTTP Port is used to access the device remotely.
HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they can not be conflict with other existing ports.

www.foscam.com

58

NVR User Manual

Mail
If you want the NVR to send emails when motion has been detected, here mail will need to be configured.

1—– SMTP server/ Port www.foscam.com

Enter SMTP server for sender. SMTP port is usually set as 25.
59

NVR User Manual
Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you select. 2—– SMTP account/ password ID account and password of the sender email address 3—– Recipient mail 1 Mailbox for receiver need not support SMTP, you can set 4 receivers. 4—– Save Click Save to take effect.
4.5.2 Device Manager
IP camera setup
You can add the camera for the NVR device on this page. Select the channel in the channel list box, enter the device information, click the add button, and the system will prompt for success.

Garden Corridor
Garden(10.66.238.180) Corridor(10.66.207.83)

Garden

Device account/PasswordThe Device account/Password is the user name and password you set when you first logged in to the NVR system using the monitor.

www.foscam.com

60

NVR User Manual
Hard disk information
You can view the hard disk information of NVR. Click the Format local disk button to clear the hard disk information of NVR. If your hard disk is full, you can check whether to Stop recording or Cover earliest record.

After the modification is completed, click Save button to take effect.
System logs
You can query the Alarm logs, Operation logs and System log of the NVR.

www.foscam.com

61

NVR User Manual

Click the page number and go to the corresponding page to see more logs

4.5.3 Application

Full in one page number, click GO button and go to the corresponding page.

Motion detection
The NVR supports Motion Detection Alarm, when the motion has been detected, it will send emails.

www.foscam.com

62

NVR User Manual

To enable motion detection, follow the steps below:

1 Channel—- Select the channel that needs motion detection.

2 Detection switch—- Whether to enable motion detection

3 Set detection area—-You can set the alarm area.

4 Device-side human detection / Human detection—- Whether to turn on detection.

5 Vehicle Detection —- Whether to turn on detection.(Supported only for some models, such as V5EP

V8EP T5EP T8EP V5P)

6 Sensitivity—- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera

will be more easily alarmed. Select one motion sensitivity.

7 Select the Action

There are some alarm indicators:

Send E-mail

If you want to receive alarm emails when motion is detected, you must select Send E-mail and set

Mail Settings first. Make sure you have set E-mail in “Device Setting -> Basic -> Mail” interface.

Recording

If you select this checkbox, when the motion has been detected, the NVR will recording and store in

HDD.

Buzzer

www.foscam.com

63

NVR User Manual
If you select this checkbox, when the motion has been detected, the NVR will alert the buzzer. 8 Alarm Schedule Alarm anytime when motion is detected.
Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the NVR will alarm.
Click this button and select all time

Specify an alarm schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the NVR will alarm.

www.foscam.com

64

NVR User Manual Press the left mouse and drag it on the time boxes, you can select the serial area.

9 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the NVR will alarm and adopt the corresponding alarm indicators.

www.foscam.com

65

NVR User Manual
Note
You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime.
Recording schedules
On the page you can configure the schedule record.Schedule Recording only supports HDD.

Select the recording channel. Check the Enable schedule checkbox, then you can set the schedule for recording. Click Save button to take effect.
HDD Alarm
When the hard disk is error, lose or full, you can set the NVR alarm.

www.foscam.com

66

NVR User Manual
Video Loss
When the video is lost, you can set an alarm message.

To enable motion detection, follow the steps below: 1 Channel—- Select the channel.

www.foscam.com

67

NVR User Manual
2 Action Send E-mail
If you want to receive alarm emails when video loss, you must select Send E-mail and set Mail Settings first. Make sure you have set E-mail in “Device Setting -> Basic -> Mail” interface.
Buzzer
If you select this checkbox, when the video has been loss, the NVR will alert the buzzer.
OSD
This page is used to add time and device name on the video.

Video encode
This is main/sub stream video settings.

www.foscam.com

68

NVR User Manual

Channel: Select the channel. Stream: There are two types to identify different streams you have set. Resolution: The camera supports multiple types in the channel, For example: 2K,3M,1080P, 720P, VGA. The higher the resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. (Different models support different specific types. ) Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. Frame Rate: Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. Click Save button to take effect.
Color adjustment
You can adjust the settings to your liking.

www.foscam.com

69

NVR User Manual

4.5.4 System
System upgrade
Click Download the Latest Firmware, you will see the following screen. And click Save to save the firmware on your computer locally.

www.foscam.com

70

NVR User Manual
Your current firmware version will be displayed on your screen. Click Browse, choose the correct bin file and then click System upgrade. Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.
Camera upgrade
Click Download the Latest Firmware, you will see the following screen. And click Save to save the firmware on your computer locally.

Your IPC current firmware version will be displayed on your screen. Click Browse, choose the correct bin file and then click upgrade. Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.
Factory reset
Click Factory Reset button and all parameters will return to factory settings if selected.

www.foscam.com

71

NVR User Manual
Reboot
Click Reboot device to reboot the NVR. This is similar to unplugging the power to the NVR.

www.foscam.com

72

NVR User Manual

Appendix

5.1 HDD Capacity Calculation

This chapter describes how to determine the size of the HDD you need when you install the NVR for the first time. The NVR adopts the MPEG4/H.264 compression technology and its dynamic range is large. Therefore, the capacity of the HDD depends on the estimated size of files generated in each channel every hour according to code streams. Computational formula of HDD Capacity: Whole HDD Capacity(M)= number of the channels time in need (hour) spent of HDD Capacity per hour (MB/hour) The meanings of parameters are as follows: Number of the channels: Number of channels where you need to enable recording. Time in need (hour): Time you need to record. Spent of HDD Capacity per hour

Spent of HDD Capacity per hour(M/hour) =

BitRate 3600(sec ond ) 8bit

You can obtain the Bit Rate by using the following methods: -In the GUI interface, choose Menu > Settings > Video , view the value of the Bit Rate. -In the Web interface, choose Parameter Configuration > Local settings > Encoding Scheme, view the value of the Bit Rate.
[Example] If you select 4M for the bit rate and select four channels for recording and one week of recording is needed, you can calculate the HDD capacity by using the following formula: Recording time(hour) =7days*24 hours=168 hour

Spent of HDD Capacity per hour(M/hour)= 4Mbit 3600 =1800M/hour 8bit

www.foscam.com

73

NVR User Manual
Whole HDD Capacity(M)=4168(hour)1800 (M/hour) =1209600M, 1209600M= 1209600M =1181.25G
1024 According to the preceding calculation result, you are advised to buy a HDD of 1.5 TB or above.

Specifications

ITEMS

FN9108HE

Video Input

IP Video Input

8 Channels QHD IP camera input

Video Output

HDMI Output

1×HDMI

VGA Output

1×VGA

3840×2160,

Display Resolution 2560×1440,1920×1080,1440×900,1280×1024,1280×800,1280×72

0,1024×768

Recording Resolution Up to 5MP per channel ( 8ch@5MP )

Recording

Record Mode

Time Scheduled / Motion Detect

Compression Format H.264/H.264+

Playback
Network HDD External Interface

Synchronous Playback 8 channels synchronous video playback

Playback Mode

Pause / Stop / Slow / Fast/ Frame Play

Ethernet

One 10/100Mbps RJ45 port

POE Standard

IEEE 802.3at/af

Network Protocol IP, TCP, UDP, SMTP, DHCP, RTSP

Capacity

Up to 16TB

Network Interface 1× 10/100 Mbps RJ45 port

USB Interface

2× USB2.0 interface for mouse and external storage

Button

1× Power on/off button,1× Reset button

System

Operating System Microsoft Windows (Foscam VMS), MacOS (Foscam VMS),

www.foscam.com

74

NVR User Manual

Requirements

Android (Foscam app),iOS (Foscam app)

Smart Phone

iOS,Android,3G/4G/5G Smartphones

Language

Language

17 languages

Power Supply

DC 48V/2A

Dimension(LxWxH) 255mm238mm50mm

Net Weight (g)

880g

Physical and Operating Temperature 0°C ~ 55°C (32°F ~ 131°F)
Environmental

Operating Humidity 20% ~ 85% non-condensing

Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)

Storage Humidity

0% ~ 90% non-condensing

Video Input

ITEMS
IP Video Input

FN9108H
8 Channels QHD IP camera input

HDMI Output

1×HDMI

Video Output

VGA Output

1×VGA

3840×2160,

Display Resolution 2560×1440,1920×1080,1440×900,1280×1024,1280×800,1280×72

0,1024×768

Recording Resolution Up to 5MP per channel ( 8ch@5MP )

Recording

Record Mode

Time Scheduled / Motion Detect

Compression Format H.264/H.264+

Playback

Synchronous Playback 8 channels synchronous video playback Playback Mode Pause / Stop / Slow / Fast/ Frame Play

Network HDD

Ethernet

One 10/100Mbps RJ45 port

Network Protocol IP, TCP, UDP, SMTP, DHCP, RTSP

Capacity

Up to 16TB

www.foscam.com

75

NVR User Manual

External Interface
System Requirements

Network Interface 1× 10/100 Mbps RJ45 port

USB Interface

2× USB2.0 interface for mouse and external storage

Button

1× Reset button

Operating System

Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app)

Smart Phone

iOS, Android, 3G/4G/5G Smartphones

Language

Language

17 languages

Power Supply

DC 12V/2A

Dimension(LxWxH) 255mm238mm50mm

Net Weight (g)

780g

Physical and Operating Temperature 0°C ~ 55°C (32°F ~ 131°F)
Environmental

Operating Humidity 20% ~ 85% non-condensing

Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)

Storage Humidity

0% ~ 90% non-condensing

ITEMS

FNA108HE

Video Input IP Video Input

8 Channels UHD IP camera input

HDMI Output

1×HDMI

Video Output

VGA Output Display Resolution

1×VGA 3840×2160,2560×1440,1920×1080,1440×900,1280×1024,1280×800 ,1280×720,1024×768

Recording

Recording Resolution Record Mode

Up to 8MP per channel ( 8ch@8MP ) Time Scheduled / Motion Detect

Compression Format H.264/H.264+

Playback

Synchronous Playback

8 channels synchronous video playback

www.foscam.com

76

NVR User Manual

Playback Mode

Pause / Stop / Slow / Fast/ Frame Play

Network

POE Standard Network Protocol

IEEE 802.3at/af IP, TCP, UDP, SMTP, DHCP, RTSP

HDD

Capacity

Up to 16TB

External Interface

Network Interface 1× 10/100/1000Mbps RJ45 port

USB Interface

2× USB2.0 interface for mouse and external storage

Button

1× Power on/off button,1× Reset button

System

Operating System

Requirements Smart Phone

Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app),iOS (Foscam app) iOS,Android,3G/4G/5G Smartphones

Language

Language

17 languages

Power Supply

DC 48V/2A

Dimension(LxWxH) 255mm238mm50mm

Net Weight (g)

880g

Physical and Operating Environmental Temperature

0°C ~ 55°C (32°F ~ 131°F)

Operating Humidity 20% ~ 85% non-condensing

Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)

Storage Humidity 0% ~ 90% non-condensing

ITEMS

FNA108H

Video Input IP Video Input 8 Channels UHD IP camera input

HDMI Output 1×HDMI

Video Output

VGA Output Display Resolution

1×VGA 3840×2160,2560×1440,1920×1080,1440×900,1280×1024,1280×800,1280×7 20,1024×768

Recording Recording

Up to 8MP per channel ( 8ch@8MP )

www.foscam.com

77

NVR User Manual

Resolution

Record Mode Time Scheduled / Motion Detect

Compression Format

H.264/H.264+

Playback

Synchronous Playback

8 channels synchronous video playback

Playback Mode Pause / Stop / Slow / Fast/ Frame Play

Network

Network Protocol

IP, TCP, UDP, SMTP, DHCP, RTSP

HDD Capacity

Up to 16TB

Network External Interface

1× 10/100/1000 Mbps RJ45 port

Interface USB Interface 2× USB2.0 interface for mouse and external storage

Button

1× Reset button

System

Operating

Requiremen System

ts

Smart Phone

Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app) iOS, Android, 3G/4G/5G Smartphones

Language Language

17 languages

Power Supply DC 12V/2A

Dimension(LxW 255mm238mm50mm
xH)

Physical

Net Weight (g) 780g

and Operating
Environmen Temperature
tal

0°C ~ 55°C (32°F ~ 131°F)

Operating Humidity

20% ~ 85% non-condensing

Storage

-20°C ~ 60°C (-4°F ~ 140°F)

www.foscam.com

78

NVR User Manual

Temperature

Storage Humidity

0% ~ 90% non-condensing

ITEMS

FN9108E (FN9108E-B4)

Video Input IP Video Input 8 Channels QHD IP camera input

Video Output

HDMI Output 1×HDMI VGA Output 1×VGA

Display Resolution

3840×2160,2560×1440,1920×1080,1440×900,1280×1024,1280×800,1280×7 20,1024×768

Recording Resolution

Up to 5MP per channel ( 8ch@5MP )

Recording Record Mode Time Scheduled / Motion Detect

Compression Format

H.264/H.264+

Playback

Synchronous Playback

8 channels synchronous video playback

Playback Mode Pause / Stop / Slow / Fast/ Frame Play

HDD

Capacity

Up to 16TB

Network
External Interface

POE Standard IEEE 802.3at/af

Network Protocol Network Interface

IP, TCP, UDP, SMTP, DHCP, RTSP 1× 10/100 Mbps RJ45 port

www.foscam.com

79

NVR User Manual

USB Interface 2× USB2.0 interface for mouse and external storage

Button

1× Power on/off button,1× Reset button

Language Language

languages

Power Supply DC 48V/2A

Dimension(LxW 255mm238mm50mm
xH)

Net Weight (g) 880g

Physical Operating

and

Temperature

Environmen Operating
tal Humidity

0°C ~ 55°C (32°F ~ 131°F) 20% ~ 85% non-condensing

Storage Temperature

20°C ~ 60°C (-4°F ~ 140°F)

Storage Humidity

0% ~ 90% non-condensing

ITEMS

V5EP (FN9108E-B4)

Sensor Type High Definition Color CMOS Sensor

Image Display

Sensor

Resolution

5.0Megapixels(3072*1728)

Min. Illumination 0 Lux (With IR Illuminator)

Lens Type

f:4mm;F2.1

Night Vision Lens
Night mode

20m Manual and automatic modes,when the white light is on, the night vision image is colored

www.foscam.com

80

NVR User Manual

Angle of view Diagonal: 94°, Horizontal: 78°, Vertical: 43.6°

Audio

Input/Output Built-in mic and speaker

Audio Compression

PCM/AAC

Siren

Support maximum 100dB alarm siren

Connectivit IEEE 802.3at/af

y

Ethernet

RJ45

Video Format H.264/H.264+

Multi-Stream Dual streams

Motion
Detection

Human
Detection Software

Features Vehicle

Detection

Day/Night

WDR

Zoom

6X digital zoom function

Spotlight

System

Operating

Requiremen System

ts

Smart Phone

Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app) iOS, Android, 3G/4G/5G Smartphones

Physical and

Waterproof Net Weight

IP66 342g

www.foscam.com

81

NVR User Manual

Environmen Power tal
Power Consumption

Powered by PoE NVR 5 Watts (Max.)

Dimension(LxW 170(L)x66 (W)x66 (H)
xH)

Certification FCC, CE, RoHS, IP66

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

-20°C ~ 50°C (-4°F ~ 122°F) 10% ~ 80% non-condensing
-20°C ~ 60°C (-4°F ~ 140°F) 0% ~ 90% non-condensing

ITEMS

FN9108E (FN9108E-T4)

Video Input IP Video Input 8 Channels QHD IP camera input

HDMI Output 1×HDMI

Video Output

VGA Output 1×VGA

Display Resolution

3840×2160,2560×1440,1920×1080,1440×900,1280×1024,1280×800,1280×7 20,1024×768

Recording Resolution Recording Record Mode

Up to 5MP per channel ( 8ch@5MP ) Time Scheduled / Motion Detect

Compression H.264/H.264+

www.foscam.com

82

NVR User Manual

Format

Playback

Synchronous Playback

8 channels synchronous video playback

Playback Mode Pause / Stop / Slow / Fast/ Frame Play

HDD

Capacity

Up to 16TB

Network
External Interface

POE Standard IEEE 802.3at/af

Network Protocol Network Interface

IP, TCP, UDP, SMTP, DHCP, RTSP 1× 10/100 Mbps RJ45 port

USB Interface 2× USB2.0 interface for mouse and external storage

Button

1× Power on/off button,1× Reset button

Langua Language
ge

17 languages

Power Supply DC 48V/2A

Dimension(LxW 255mm238mm50mm
xH)

Net Weight (g) 880g

Physical Operating

and

Temperature

Environmen Operating
tal Humidity

0°C ~ 55°C (32°F ~ 131°F) 20% ~ 85% non-condensing

Storage Temperature

-20°C ~ 60°C (-4°F ~ 140°F)

Storage Humidity

0% ~ 90% non-condensing

www.foscam.com

83

NVR User Manual

ITEMS

T5EP(FN9108E-T4)

Image Sensor

Sensor Type High Definition Color CMOS Sensor

Display Resolution Min. Illumination

5.0Megapixels(3072*1728) 0 Lux (With IR Illuminator)

Lens Type

f:4mm;F2.1

Lens

Night Vision 20m

Night mode

Manual and automatic modes,when the white light is on, the night vision image is colored

Angle of view Diagonal: 94°, Horizontal: 78°, Vertical: 43.6°

Input/Output Built-in mic and speaker

Audio Audio
Compression

PCM/AAC

Siren

Support maximum 100dB alarm siren

Connectivit IEEE 802.3at/af

y

Ethernet

RJ45

Video Format H.264/H.264+

Software Features

Multi-Stream Motion Detection Human Detection

Dual streams

www.foscam.com

84

NVR User Manual

Vehicle
Detection

Day/Night

WDR

Zoom

6X digital zoom function

Spotlight

System

Operating

Requiremen System

ts

Smart Phone

Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app) iOS, Android, 3G/4G/5G Smartphones

Waterproof

IP66

Net Weight

380g

Power

Powered by PoE NVR

Power Consumption

5 Watts (Max.)

Physical Dimension

and

Certification

Environmen Operating
tal Temperature

Operating Humidity

Storage Temperature

Storage Humidity

110*100 mm FCC, CE, RoHS, IP66
-20°C ~ 50°C (-4°F ~ 122°F) 10% ~ 80% non-condensing -20°C ~ 60°C (-4°F ~ 140°F) 0% ~ 90% non-condensing

www.foscam.com

85

NVR User Manual

ITEMS

FNA108E (FNA108E-B4)

Video Input IP Video Input 8 Channels UHD IP camera input

HDMI Output 1×HDMI

Video Output

VGA Output 1×VGA

Display Resolution

3840×2160,2560×1440,1920×1080,1440×900,1280×1024,1280×800,1280×7 20,1024×768

Recording Resolution

Up to 8MP per channel ( 8ch@8MP )

Recording Record Mode Time Scheduled / Motion Detect

Compression Format

H.264/H.264+

Playback

Synchronous Playback

8 channels synchronous video playback

Playback Mode Pause / Stop / Slow / Fast/ Frame Play

HDD

Capacity

Up to 16TB

POE Standard IEEE 802.3at/af

Network Network Protocol

IP, TCP, UDP, SMTP, DHCP, RTSP

External Interface

Network Interface

1× 10//100/1000 Mbps RJ45 port

USB Interface 2× USB2.0 interface for mouse and external storage

Button

1× Power on/off button,1× Reset button

Language Language

17 languages

Physical Power Supply DC 48V/2A

www.foscam.com

86

NVR User Manual

and

Dimension(LxW

255mm238mm50mm

Environmen xH)

tal

Net Weight (g) 880g

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

0°C ~ 55°C (32°F ~ 131°F) 20% ~ 85% non-condensing
-20°C ~ 60°C (-4°F ~ 140°F) 0% ~ 90% non-condensing

ITEMS

V8EP(FNA108E-B4)

Image Sensor

Sensor Type High Definition Color CMOS Sensor

Display Resolution

8.0Megapixels(3840*2160)

Min. Illumination 0 Lux (With IR Illuminator)

Lens Type

f:4.3mm; F1.6

Lens

Night Vision 20m

Night mode

Manual and automatic modes,when the white light is on, the night vision image is colored

Angle of view Diagonal: 108.5°, Horizontal: 90.1°, Vertical 46.2°

Input/Output Built-in mic and speaker

Audio Audio Compression

PCM/AAC

www.foscam.com

87

NVR User Manual

Siren

Support maximum 100dB alarm siren

Connectivit IEEE 802.3at/af

y

Ethernet

RJ45

Video Format H.264/H.264+

Multi-Stream Dual streams

Motion
Detection

Human
Detection Software

Features Vehicle

Detection

Day/Night

HDR

Zoom

6X digital zoom function

Spotlight

System

Operating

Requiremen System

ts

Smart Phone

Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app) iOS, Android, 3G/4G/5G Smartphones

Waterproof

IP66

Physical and

Net Weight

Environmen Power

342g Powered by PoE NVR

tal

Power

5 Watts (Max.)

Consumption

www.foscam.com

88

NVR User Manual

Dimension(LxW 170(L)x66 (W)x66 (H)
xH)

Certification FCC, CE, RoHS, IP66

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

-20°C ~ 40°C (-4°F ~ 104°F) 10% ~ 80% non-condensing -20°C ~ 60°C (-4°F ~ 140°F) 0% ~ 90% non-condensing

ITEMS

FNA108E (FNA108E-T4)

Video Input IP Video Input 8 Channels UHD IP camera input

HDMI Output 1×HDMI

VGA Output Video Output
Display Resolution Recording Resolution

1×VGA 3840×2160,2560×1440,1920×1080,1440×900,1280×1024,1280×800,1280x 720,1024×768
Up to 8MP per channel ( 8ch@8MP )

Recording Record Mode Time Scheduled / Motion Detect

Compression Format

H.264/H.264+

Playback

Synchronous Playback

8 channels synchronous video playback

Playback Mode Pause / Stop / Slow / Fast/ Frame Play

www.foscam.com

89

NVR User Manual

HDD

Capacity

Up to 16TB

POE Standard IEEE 802.3at/af

Network

Network Protocol

IP, TCP, UDP, SMTP, DHCP, RTSP

Network

Interface External

Interface

USB Interface

1× 10/100/1000 Mbps RJ45 port 2× USB2.0 interface for mouse and external storage

Button

1× Power on/off button,1× Reset button

Language Language

17 languages

Power Supply DC 48V/2A

Dimension(LxW 255mm238mm50mm
xH)

Net Weight (g) 880g

Physical and Operating Environmenta Temperature

l

Operating

Humidity

Storage

Temperature

Storage

Humidity

0°C ~ 55°C (32°F ~ 131°F) 20% ~ 85% non-condensing -20°C ~ 60°C (-4°F ~ 140°F) 0% ~ 90% non-condensing

ITEMS

T8EPP(FNA108E-B4)

Sensor Type Image Sensor
Display

High Definition Color CMOS Sensor 8.0Megapixels(3840*2160)

www.foscam.com

90

NVR User Manual

Resolution

Min. Illumination Lens Type

0 Lux (With IR Illuminator) f:4.3mm; F1.6

Lens

Night Vision 20m

Night mode

Manual and automatic modes,when the white light is on, the night vision image is colored

Angle of view Diagonal: 108.5°, Horizontal: 90.1°, Vertical 46.2°

Input/Output Built-in mic and speaker

Audio

Audio Compression

PCM/AAC

Siren

Support maximum 100dB alarm siren

Connecti IEEE 802.3at/af

vity

Ethernet

RJ45

Video Format H.264/H.264+

Multi-Stream Dual streams

Motion
Detection

Software Human

Features

Detection

Vehicle
Detection

Day/Night

HDR

www.foscam.com

91

NVR User Manual

Zoom

6X digital zoom function

Spotlight

Operating

System

System

Requirements Smart Phone

Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app) iOS, Android, 3G/4G/5G Smartphones

Waterproof Net Weight

IP66 380g

Power

Powered by PoE NVR

Power Consumption

5 Watts (Max.)

Dimension Physical and

Environmenta Certification

l

Operating

Temperature

110*100 mm FCC, CE, RoHS, IP66 -20°C ~ 40°C (-4°F ~ 104°F)

Operating Humidity

10% ~ 80% non-condensing

Storage Temperature

-20°C ~ 60°C (-4°F ~ 140°F)

Storage Humidity

0% ~ 90% non-condensing

www.foscam.com

92

NVR User Manual
5.3 FAQ
1. No image displayed on the monitor after starting up normally. Verify the device is connected with the monitor via HD-OUT or VGA cable. Verify the connection cable is good. Verify Input mode of the monitor is correct.
Please check the input mode of the monitor matches with the output mode of the device (e.g. if the output mode of NVR is HD-OUT output, then the input mode of monitor must be the HD-OUT input). And if not, please modify the input mode of monitor. 2. No record file found in the NVR local HDD, and prompt “No record file found”. Verify the system time setting is correct. Choose Menu > Settings > General in the GUI interface, and verify the time is correct. Verify the search condition is correct. Choose Menu > Playback in the GUI interface, and verify the channel and time are correct. Verify the HDD status is normal. Choose Menu > About > HDD Info in the GUI interface, view the HDD status. 3. Why recording is not performed after motion detection is enabled? On the “Motion Detection” page, check whether the following are correctly set: Check whether the motion detection channel is correct. Check whether a trigger time segment is set. Check whether a detection area is set. Check whether recording is selected. 4. The screen of the display is incomplete. Confirm the current resolution and check the resolution supported by the display. If the resolution is 19201080, the display needs to support the resolution 19201080.
5. Why can’t video files be downloaded during video playback or downloaded files cannot be played back properly?
To save consumed resources, the server limits concurrency of video playback and file download. In this case, stop video playback and then download files or play back videos after video files are downloaded.

www.foscam.com

93

NVR User Manual

5.4 Glossary

Acronym Term

Description

DDNS

Dynamic Domain Name Server

Dynamic DNS is a method, protocol, or network service that provides the capability for a networked device, such as a router or computer system using the Internet Protocol Suite, to notify a domain name server to change, in real time (ad-hoc) the active DNS configuration of its configured hostnames, addresses or other information stored in DNS.

DHCP

Dynamic Host Configuration Protocol

DHCP is a network application protocol used by devices (DHCP clients) to obtain configuration information for operation in an Internet Protocol network.

HDD

Hard Disk Drive

A storage medium which stores digitally encoded data on platters with magnetic surfaces.

PPPoE

Point-to-Point Protocol over Ethernet

It is a network protocol for encapsulating Point-to-Point Protocol (PPP) frames inside Ethernet frames. It is used mainly with ADSL services where

individual users connect to the ADSL transceiver (modem) over Ethernet and in plain Metro Ethernet networks.

PTZ

Pan, Tilt, Zoom

PTZ cameras are motor driven systems that allow the camera to

pan left and right, tilt up and down and zoom in and out.

NTP

Network Time Protocol

A protocol designed to synchronize the clocks of computers over a network.

NVR

Network Video Recorder

A NVR can be a PC-based or embedded system used for centralized management and storage for IP cameras.

VMS

Video Management System

Foscam VMS is a new tool for PC. It does not require plug-ins and is compatible with Windows & Mac, It supports all Foscam HD cameras and up to 36 cameras at the same time.

www.foscam.com

94

NVR User Manual
5.5 CE & FCC
Electromagnetic Compatibility (EMC) FCC Statement
This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is like to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
FCC Caution Any changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

WARRANTY

FOSCAM values your business and always attempts to provide you the very best of service.

No limited hardware warranty is provided by FOSCAM unless your Foscam product (“product”)

was purchased from an authorized distributor or authorized reseller. Distributors may sell products to

resellers who then sell products to end users. No warranty service is provided unless the product is

www.foscam.com

95

NVR User Manual

returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications.
If you purchase your Foscam product from online store, please contact the point-of-purchase and ask for return / replacement / repair service.
Limited Hardware Warranty

The products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of Foscam. This limited hardware warranty does not cover:
Software, including the software added to the products through our factory- integration system, software, etc.
Usage that is not in accordance with product instructions. Failure to follow the product instructions. Normal wear and tear.
Return Procedures

Please read Foscam warranty policy & policy of your reseller first before sending items back to point-of-purchase.
Customer must first contact point-of-purchase to obtain a Return Merchandise Authorization (RMA) number before returning the product. If the product you received is suspected to be defective and the product warranty has not expired, The RMA number will allow your reseller to track your return much easier and help them expedite processing your request.
After receiving your RMA case number, pack the item(s) very well with the original box and all the original accessories included such as power adapters, brackets, cables, manuals.
Write your RMA number and the return reason (the problem of the product) on the warranty card along with the complete package to send them back.
Replacement Services

If customers ask for replacement service, please contact point-of-purchase and follow their policy.
Our technicians will inspect all items returned for replacement requests. If the retuned product is found in working order, we will return the same item received. However customers shall be responsible for all shipping & handling charges incurred for getting the units back to customers.
If returned products are found defective, we will replace the product and assume the shipping cost

www.foscam.com

96

NVR User Manual

for sending back the replacement unit to customers. If for any reason, we are unable to provide a replacement of the original returned item(s). You will
have a choice for a “Substitute” item at the same equal value. We do not provide exchange and replacement due to normal hardware upgrade according the
market after 14 days after the product is delivered. Our technicians will test the product before send out the replacement, any other demand for more
than two times replacement for the same product during replacement limit will be rejected. Replaced products are warranted from the balance of the former warranty period.
Warranty Forfeiture

Warranty is void if purchase from unauthorized distributor or reseller. Warranty is void if trade-mark, serial tags, product stickers have been removed, altered or
tampered with. Warranty is void for mishandling, improper use, or defacing the product. Warranty is void for physical damage, altered, either internally or externally, improper or inadequate
packaging when returned for RMA purposes. Warranty is void if damage has resulted from accident, dismantle, abuse, or service or modification
by someone other than the appointed vendor, souse, fission or the spare part has been over the period of warranty. Warranty is void if product is damaged due to improper working environment or operation. (For example, improper temperature, humidity, unusual physical or electrical stress or interference, failure or fluctuation of electrical power, static electricity, using wrong power adapter, etc.) Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM. Damage caused by improper installation of third-party products. Warranty is void if damaged for irresistible cause, such as earthquake, fire, lightning, flood, etc. Product beyond limited warranty.
Shipping Fee

If products are defective or damaged under normal use or operation in the replacement limit,

distributors or resellers are responsible for the shipping cost the product back to customers,

customers should assume the shipping cost send the product to the point-of- purchase.

During replacement limit, if customers ask for replacement due to the product does not fit for

customer’s personal expectation, customers should responsible for both shipping fee.

Customers shall be responsible for both shipping fee if their product beyond the replacement limit

but still in warranty limit.

www.foscam.com

97

NVR User Manual
Repair Service Out Of Warranty
FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee. Device cost (including accessories) is the standard uniform price provide by FOSCAM.
Different region may have different service fee, please contact the point-of- purchase to confirm that before you ask for this service.
Our technicians will quote the total price after detect the product, If customers refused to repair after the quotation, customers need pay for the test fee, $3.5/hour. If agree with the quotation, test will be free.
Repaired product out of warranty will obtains 3-month warranty from the date of the product back to customers.
Limitation of Liability
Foscam is not responsible for other extra warranty or commitment promised by resellers, if your reseller promised some extra commitment or warranty; please ask for written documents to protect your rights and interests.
Foscam does not offer refunds under any circumstances. Please contact the point-of-purchase and follow their refund / return policy.
Foscam shall not be liable under any circumstances for any consequential, incidental, special or
exemplary damages arising out of or in any connection with this agreement or the products, including but not limited to lost profits, or any claim based on indemnity or contribution, or the failure of any limited or exclusive remedy to achieve its essential purpose or otherwise. Purchaser’s exclusive remedy, as against Foscam, shall be the repair or replacement of defective parts. If Foscam lists a product on its website specification in error or that is no longer available for any reason, Foscam reserves the right to explain it without incurring any liability. All rights reserved. FOSCAM and the Foscam logo are trademarks of ShenZhen FOSCAM Intelligent Technology Limited., registered in the U.S. and other countries.

www.foscam.com

98

NVR User Manual

5.7 Statement

You are advised to be cautious in daily life, keep personal account information carefully, do not share personal account easily. Change passwords of your account and equipment periodically, and upgrade equipment firmware to strengthen security consciousness.
Our company makes no warranty, implied or otherwise, that this product is suitable for any particular purpose or use. You need to abide by the relevant laws and regulations of the use restrictions when using products. Our company takes no responsibility of illegal activities by using our products.
Our company takes no responsibility of the loss by force majeure, such as failure or faults of telecom system or the Internet network, computer viruses, malicious attacks of hackers, information damage or loss, and faults of computer system.
My company does not need to take any responsibility of the special, incidental or corresponding loss by the products of our company or any software provide by our company, including but not limited to operating loss, profit or purpose. The company only takes the responsibility applicable to national and local legal requirements.
Our company takes no responsibility of the loss caused by the following at ant time:

  1. loss of purchases;
  2. loss of intangible property damage, such as data, programs;
  3. loss of compensation claimed by third-party customers.
    Delete images, format the memory card or other data storage devices does not completely remove the original image data. You can restore deleted files from discarded the storage device by commercial software, but which will potentially lead to personal image data used maliciously by others. The privacy of the data security belongs to user responsibility, the company takes no responsibility.
    Parts mentioned in this statement should not be understood by the configuration description of the product purchased by the customer, the product configuration must accord to the specific models purchased by the customer.
    Without the prior written permission of my company, all the contents of relevant operating instructions manual affiliated to the product must not be reproduced, transmitted, transcribed or stored in a retrieval system, or translated into other languages.
    Our company will reserve the right to improve and modify the product and corresponding manuals.

www.foscam.com

99

NVR User Manual
The company reserves the right of final interpretation on our products.
5.8 Obtaining Technical Support
While we hope your experience with the NVR is enjoyable and easy to use, you may experience some issues or have questions that this User’s Guide has not answered. If you have problem with device, please first contact reseller for solving the problems. If our reseller cannot provide service, please contact our service department: support@foscam.com

CE Certificate statement Website: https://www.foscam.com/company/ce- certificate.html Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html www.foscam.com Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: : Room 902,Building 1B, Shenzhen International Innovation Valley, Xingke 1st Street, Nanshan District, Shenzhen, Guangdong, China, 518055

www.foscam.com

100

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals