FOSCAM VD1 4MP Dual Band Wi-Fi Video Doorbell User Guide
- June 6, 2024
- FOSCAM
Table of Contents
- FOSCAM VD1 4MP Dual Band Wi-Fi Video Doorbell
- What’s in the Box
- Physical Description
- Add Device: Connection via the Foscam App (Recommended)
- Video Doorbell Installation
- Other Ways to Access Your Doorbell
- Important Notice
- FCC Caution
- Product Performance
- Technical Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FOSCAM VD1 4MP Dual Band Wi-Fi Video Doorbell
What’s in the Box
Physical Description
Add Device: Connection via the Foscam App (Recommended)
It is strongly recommended that you complete the “add devices” process on the Foscam app before the doorbell hardware is installed. Before You Get Started Scan the QR code below to download and install the Foscam APP
To ensure a smoother video experience on your smart phone, it is recommended that your smart phone meet the following specifications:
- iOS: version 11 or higher.
- Android: 4.1 or higher, using a device with a Graphics Processing Unit (GPU).
Note : For the best experience, please update the APP to the latest version!
WiFi connection
- Plug the smaller end of the USB cable into the Type-C port on the back of the Video Doorbell, and the larger end into a USB wall charger such as your smartphone charger (DC5V 1.0A power output recommended for faster charging). Please wait for a few seconds until you hear “Ready for WiFi configuration”.
- Tips : If you didn’t hear the voice prompt, press and hold reset for about 10 seconds to reset the camera. Make sure that your smart phone is connected to your WiFi router.
- Open the foscam APP and please sign up for a Foscam account, or sign in if you have one already.
- After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the upper right corner, then select “Scan the QR code” and scan the QR code that labeled at the bottom of your camera.
- In “Add Device”, if you hear “Hello Foscam”, select the checkbox and tap ”Next”, continue to confirm that the device is in the blue fashing state and tap ”Next”. In “WiFi connection”, enter your WiFi’s password and tap “Confirm”, (see illustrations on next page).
- Please scan the QR code on the doorbell with the smartphone camera, then you will hear a voice prompt say ”WiFi connecting”. Select the checkbox and tap ”Next”. tips : Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in) away, and if you encounter difficulties you can try to move the screen slowly around 10 – 15cm (3.94 – 5.9in).
- Wait a few seconds until the camera notifies you that the “Wireless connection succeeded”, which means your camera has connected to your WiFi successfully. After, you can set the camera name and tap “Save” in “Set name” interface. Note : If the process of adding a camera fails, please reset your camera and try adding again according to the above method.
Video Doorbell Installation
Note : Make sure you have installed the Foscam App, and have scanned the
doorbell QR code and completed the “add device” process in the app before
beginning the hardware installation process.
Step 1 Ring the existing doorbell, make sure it’s working and locate the
place of your existing chimes in the house.
Step 2 Shut off the master circuit breaker in your house. Turn the lights
in your home on / off to make sure the electricity in your house is properly
shut off.
Note : If you’re not comfortable doing it yourself, consult a qualified electrician.
Step 3 (Optional)
Indoor chimes are generally of two types: mechanical, or digital. Normally,
you only need to install the power kit for digital chimes. However, due to the
many types of chimes, if your home’s mechanical bell does not work properly
when connected to our video doorbell, please install the power kit to solve
this problem. How to distinguish between Digital Chime and mechanical Chime,
please scan the following QR code to view.
After removing the cover of the digital chime, use the wire connection terminal with the Power Kit as pictured. After wiring is completed, replace the cover.
Step 4
Determine the mounting position of the doorbell. First check if you can reuse
the existing holes in the wall. Use the drill hole position template to mark
the screw holes in the area where the existing doorbell button was located.
Place the drill hole position template at least 1.5m (59″) high from the
ground to ensure that the height of the installed doorbell will be suitable,
and then drill the holes (use PH2 drill bit).
Step 5
Use the provided wall anchors if installing in materials such as stucco,
brick, or concrete. If installing into a wooden doorframe, there is no need to
use the wall anchors.
Step 7
Optional: Use the 15° mounting bracket or 5° mounting bracket as a
supplementary mounting bracket if you wish to adjust the doorbell camera’s
field of view to cover more of one side.
Step 8
Lead the two existing doorbell wires through the central square hole on the
bracket before you start mounting. Insert the two provided screws through the
screw holes, or through the 5° Vertical angle bracket / 15° Horizontal angle
bracket / Thick mounting bracket,(install the mounting bracket to the 5°
Vertical angle bracket / 15° Horizontal angle bracket ), and fasten the screws
tightly. What is required: Mounting Bracket / Screw Packs / 5° Vertical angle
bracket(Optional) / 15° Horizontal angle bracket (optional) / Dual-purpose
screwdriver
Step 9
Connect the wires to the two terminals at the back of the doorbell, then
tighten the terminal screws. Wire can connect to any terminal as the electric
current is alternating current. Note: To prevent short-circuit, make sure the
wires are not touching each other after connecting them to the terminals. If
the wires are too short, use the extension wires and wire nuts provided to
make them longer. Use electrical wiring tape to secure the connection if the
wall doesn’t have space for wire nuts. What are required: Extension Wires and
Wire Nuts (Optional) / Video doorbell / Philips-Head Screwdriver
Step 10 Hook the doorbell on top of the mounting bracket and then snap the doorbell bottom to the bracket. You may hear a “click” sound.
Step 11 Switch the master circuit breaker in your house back to ON.
Step 12
Press the doorbell to test the chime connection. Did your doorbell chime? If
yes, it’s working! If no, check that wires are secure. Open the foscam APP
again and check if you can view live video.
If not, please remove the doorbell and press the reset button to re-add it in the app.
Step 13
Use the included screwdriver to tighten the anti-theft screw. What’s required:
Dual-purpose screwdriver
Other Ways to Access Your Doorbell
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins and is
compatible with Windows & Mac, supporting all Foscam HD cameras and up to 36
cameras at the same time. If you would like to manage multiple cameras, we
suggest you install Foscam VMS. You can download the “Foscam VMS ” Windows
version from foscam.com/vms, and can download the
“Foscam VMS” Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note : For the best experience, please update Foscam VMS to the latest
version!
Add the IP Camera
- Run Foscam VMS, then create a local administrator account and login.
- Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your camera.
Please visit foscam.com/downloads to view the user manual and for additional detailed steps.
Important Notice
Doorbell Username & Password
The doorbell username & password are used to access and manage your doorbell.
Having a strong password can significantly improve the security of your
doorbell. If you have forgotten either of them, please press the “Reset”
button and hold it for more than 10 seconds while the doorbell is powered on.
After hearing the voice prompt, release the button. The doorbell will
automatically reboot and the default settings will be restored. You can then
reconnect the camera by following this Quick Setup Guide.
Foscam Cloud Service Account Username & Password
Your Foscam Cloud service account and password may be used to access both the
Foscam App and the Foscam Cloud service website. Therefore, you can register
your account username & password on either one.
Storage Media
Your Foscam Cloud service account and password may be used to access both the
Foscam App and the Foscam Cloud service website. Therefore, you can register
your account username & password on either one.
Storage Media
Your doorbell supports cloud, NVR (Network Video Recorder), and Micro SD card
(supports FAT-32 and ex-FAT format) storage formats. If you wish to record and
play back large amounts of video, we recommend using a Foscam NVR device as
well.
Firmware Upgrades
You can upgrade the firmware of your camera with the Foscam App by using the
new “One-Key-Online Upgrade” feature (Open the Foscam App and Login to the
camera, select “Settings” > “Firmware Upgrade”).
You also can download the latest version to upgrade your camera from our
official website foscam.com/upgrades.
Safety Tips
- Please ensure that the proper power supply is used before using the doorbell.
- Please install the doorbell and bracket securely using the screws provided.
- Please use this product within the temperature range -4°F~122°F (-20℃~50℃). When the ambient temperature is too high or too low, it may cause product failure.
- To avoid the risk of fire or electric shock, please keep your camera in a cool, dry place.
- Please keep the doorbell out of reach of small children.
- This product is not a toy; children should use the product under adult supervision.
- Change your default port to a greater range to help ensure the safety of your connection. How to change the default port: please visit foscam.com/downloads to view the user manual. Check the logs of your Foscam doorbell
- frequently. Foscam doorbell have embedded logs telling you which IP addresses are accessing the doorbell.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
Product Performance
WLAN frequency range: 2412MHz – 2472MHz and 5725MHz – 5850MHz Wireless Standard: IEEE802.11b/g/n (2.4GHz) IEEE802.11a/n/ac (5GHz) Power Supply: DC 5V 1.0A 5W or DC 8~24
Technical Support
If you have problems with your Foscam device, please contact the reseller you purchased from, or you can e-mail the company headquarters technical support team: support@foscam.com Your valuable comments and suggestions on improving Foscam products are welcomed!