FIRST ALERT CM420 Digital Wired Indoor Outdoor Camer User Manual
- June 17, 2024
- First Alert
Table of Contents
420 TVL
CMOS Camera
INDOOR / OUTDOOR
for wired video systems
USER’S MANUAL
Model
CM420 1/3″ CMOS
with Night Vision
night vision
indoor/ outdoor 420 TVL cameras
Introduction
thank you
Welcome
Thank you for choosing First Alert for your security needs!
For more than half a century, First Alert has made the home-safety and
security products that make your job easier. Our products are built to the
highest standard which has earned us a leadership role in the home-safety and
security product categories. We are committed to serving our customers, from
the professionals who install our products, to the families and businesses who
count on them.
First Alert has been helping families and businesses stay safe for over 50
years. By having a First Alert Security System, you’re taking the first step
in protecting your home or business from damage or theft. We’re watching, even
when you’re not.
This manual is written for the CM420 security camera. It was accurate at the
time it was completed.
However, because of our ongoing effort to constantly improve our products,
additional features and functions may have been added since that time and on-
screen displays may change. We encourage you to visit our website at
www.brkelectronics.com to check for the
latest manuals (English and Spanish), firmware updates, downloads, other
security camera products and announcements. You’ll find this product line
under Products >> Security Cameras >> Wired Cameras.
©2011 BRK Brands, Inc.
a Jarden Corporation company (NYSE:JAH)
www.brkelectronics.com
All rights reserved. Distributed by BRK Brands, Inc. 3901 Liberty Street Road,
Aurora, IL 60504-8122. Due to continuing product development, the product
inside the packaging may look slightly different than the one on the package.
BRK Brands, Inc. is a subsidiary of Jarden Corporation (NYSE: JAH). To obtain
warranty service, contact the Consumer Affairs Division at 1-800- 323-9005,
Monday through Friday, 7:30 a.m. – 5 p.m., Central Standard Time.
Made in China
key product features
CAMERA MAIN FEATURES
• 1/3″ CMOS Color
• 420 TVL Resolution
• 30 IR LEDs
• Night Vision Distance 50′
• 6.0mm Lens| • 0 Lux Day & Night Auto Switch
• IP54 Weather Proof Rating
• ABS Plastic Housing and Mounting Stand
• Mounting Bracket and Hardware Included
---|---
|
---|---
CM420 420 TVL Camera| Quick Install Guide
|
12V DC Power Adaptor| 75’ BNC Video & DC Power Cable
Safety caution statements
safety precautions
- Do not drop, puncture, or disassemble the cameras or DVR.
- Do not tug on the power adapter. Use the plug to remove it from the wall.
- Do not expose the cameras or DVR to high temperatures.
- For your own safety, avoid using the DVR when there is a storm or lightning in your area.
- Use the cameras and DVR with care. Avoid pressing hard on the cameras or DVR body.
- Do not use power cable if it is crushed or damaged
Fcc compliance
FCC Compliance Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that of the receiver.
- Consult the dealer or an experienced radio or TV technician for help.
Notice: Only peripherals complying with FCC class B limits may be
attached to this equipment. Operation with non-compliant peripherals or
peripherals not recommended by First Alert / BRK Brands, Inc. is likely to
result in interference to radio and TV reception. Changes or modifications to
the product, not expressly approved by First Alert / BRK Brands, Inc., could
void the user’s authority to operate the equipment.
We, First Alert / BRK Brands, Inc. declare under our sole responsibility that
the device to which this declaration relates: Complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
FCC Certification (if applicable)
This device contains a radio transmitter. Accordingly, it has been certified
as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators.
Products that contain a radio transmitter are labeled with an FCC ID.
Fire and electric shock hazard statement
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM THE DVR BEFORE REMOVING
COVER. FAILURE TO DO SO CAN RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS AS
WELL AS INJURY OR DEATH.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle, is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG TO THE
WIDE SLOT AND FULLY INSERT
Product Overview
CAMERA AND POWER CONNECTIONS
Installing cameras
Mounting Cameras and Running Cable
Select the position for the camera and secure the camera stand. Screw the
camera onto the stand. Adjust camera to the proper view angle. Make sure the
lens is upright relative to the subject. Tighten the thumb bolt. First Alert
cameras can be either ceiling or wall mounted by simply reversing the camera
stand mounting. See “Camera Orientation” Info box. Holes are provided on both
the bottom and back of the camera housing to accommodate most mounting
requirements. Run cable from camera to DVR location.
See Information box below on “Longer Cable Runs”.
Camera Orientation
It’s important the camera is mounted correctly to ensure the image is not
upside down as the camera lens can only be positioned one way.
Longer Cable Runs
Longer cable runs may require an upgrade to RG59 Coax cable. First Alert kits
ship with economical AV cable that is designed to work well up to the length
of cable provided, usually around 60 feet. If longer distances between camera
and DVR are required, you will need to upgrade to RG59 Coax cable. We provide
several lengths up to 300 feet. In addition, if you need to run cable for in-
wall installations, then you may require fire rated cable, FT-4/CMR UL
approved for in-wall installations.
Connecting cameras
Follow this diagram to connect camera to a DVR or other device using a BNC
connection. Note:
DVR Power Adaptor is for illustration purposes only. Your power adaptor may be
different.
Appendix Specifications and Troubleshooting
Technical Specifications
| Item | Specification |
|---|---|
| Model | CM420 |
| Image Sensor | Color 1/3” CMOS (NTSC) ; Color 1/3” CMOS (PAL) |
| Effective Pixels | NTSC: 720 (H) X 487(V) : PAL: 720 (H) X 576 (V) |
| Horizontal Resolution | 420TVL |
| IP Rating | IP54 |
| Number of infrared LED’s | 30 |
| Night-Vision Range | 50 ft. |
| Indoor/Outdoor | Both |
| Signal System | NTSC/PAL |
| Lens | 6mm |
| Frame Rate | NTSC: 60 fields/sec ; PAL: 50 fields/sec |
| Minimum Illuminance | 0 Lux (IR ON) |
| Audio | No |
| Gain Control & White Balance | Auto |
| Signal to noise Ratio | >48dB (AGC OFF) |
| Gamma Characteristics | 0.45 |
| Shutter Speed | 1/50(1/60) 1/100000 |
| Infrared Wave Length | 850nm |
| Video Output | 1.0Vp-p 75 Ohm |
| Power Supply | DC 12V 225mA(IR ON) |
| Operation Temperature | 14 °F to 113 °F (-10 °C to 45 °C) |
Troubleshooting
| Error | Possible Cause | Solutions |
|---|---|---|
| No Picture | Camera cables are loose or have become disconnected | • Check the |
camera video cable and connections
• Disconnect and reconnect the cable at the system and at the camera
• Try moving the camera to another channel or use another cable
Flickering image| Bright light shining directly into camera lens| • Move the
camera or move any source of bright light away from the camera
Image is too light or dark| Mis-adjustment of contrast and brightness
levels| • Adjust the contrast and brightness on the DVR or TV
• Move the camera or move any source of bright light away from the camera
A white image appears at
night| Camera is placed too close to a window| • The camera’s infrared LEDs
shine invisible light that reflects off surfaces such as glass causing white
light
• Place the camera on the other side of windows or place the lens flush
against the surface to improve night vision
Appendix Warranty
Warranty
PRODUCT LIMITED WARRANTY
BRK Brands, Inc., (“BRK”) the maker of First Alert® brand products warrants
that for a period of one year from the date of purchase (the “Warranty
Period”), this product will be free from defects in material and workmanship.
BRK, at its sole option, will repair or replace this product or any component
of the product found to be defective during the Warranty Period. Replacement
or repair will be made with a new or remanufactured product or component. If
the product is no longer available, replacement may be made with a similar
product of equal or greater value. This is your exclusive warranty.
This warranty is valid for the original retail purchaser only from the date of
initial retail purchase and is not transferable. In order to obtain warranty
service, you must keep the original sales receipt and proof of purchase in the
form of the UPC code from the package. BRK dealers, service centers, or retail
stores selling BRK products do not have the right to alter, modify or any way
change the terms and conditions of this warranty.
WARRANTY EXCLUSIONS
Parts and Labor: 1 year limited (warranted parts do not include bulbs, LEDs,
and batteries)
This warranty does not apply to bulbs, LEDs, and batteries supplied with or
forming part of the product.
This warranty is invalidated if non- BRK accessories are or have been used in
or in connection with the product or in any modification or repair is made to
the product.
This warranty does not apply to defects or damages arising by use of the
product in other than normal (including normal atmospheric, moisture and
humidity) conditions or by installation or use of the product other than in
strict accordance with the instructions
contained in the product owner’s manual.
This warranty does not apply to defects in or damages to the product caused by
(i) negligent use of the product, (ii) misuse, abuse, neglect, alteration,
repair or improper installation of the product, (iii) electrical short
circuits or transients, (iv) usage not in accordance with product
installation, (v) use of replacement parts not supplied by BRK, (vi) improper
product maintenance, or (vii) accident, fire, flood or other Acts of God.
This warranty does not cover the performance or functionality of any computer
software included in the package with the product.
BRK makes no warranty that the software provided with the product will
function without interruption or otherwise be free of anomalies, errors, or
“Bugs.” This warranty does not cover any costs relating to removal or
replacement of any product or software installed on your computer.
BRK reserves the right to make changes in design or to make additions to or
improvements in its products without incurring any obligations to modify any
product which has already been manufactured. BRK will make every effort to
provide updates and fixes to
its software via its website. This warranty does not cover any alteration or
damage to any other software that may be or may become resident on the users
system as a result of installing the software provided. This warranty is in
lieu of other warranties, expressed or implied, and BRK neither assumes nor
authorizes any person to assume for it any other obligation or liability in
connection with the sale or service of the product. In no event shall BRK be
liable for any special or consequential damages arising from the use of the
product or arising from the malfunctioning or non-functioning of the product,
or for any delay in the performance of this warranty due to any cause beyond
its control.
BRK does not make any claims or warranties of any kind whatsoever regarding
the product’s potential, ability, or effectiveness to prevent, minimize, or in
any way affect personal or property damage or injury. BRK is not responsible
for any personal damage, loss, or theft related to the product or to its use
for any harm, whether physical or mental related thereto. Any and all claims
or statements, whether written or verbal, by salespeople, retailers, dealers,
or distributors to the contrary are not authorized by BRK, and do not affect
this provision of this warranty.
BRK’s responsibility under this, or any other warranty, implied or expressed,
is limited to repair, replacement or refund, as set forth above. These
remedies are the sole and exclusive remedies for any breach of warranty. BRK
is not responsible for direct, special, incidental, or consequential damages
resulting from any breach of warranty or under any other legal theory
including but not limited to, loss profits, downtime, goodwill, damage to or
replacement of equipment and property and any costs of recovering,
reprogramming or reproducing any program or data stored in or used with a
system containing the product accompanying software.
BRK does not warrant the software will operate with any other software except
that which is indicated. BRK cannot be responsible for characteristics of
their party hardware or software which may effect the operation of the
software included.
Except to the extent prohibited by applicable law, any implied warranty of
merchantability or fitness for a particular purpose is limited in duration to
the duration of the above Warranty Period. Some states, provinces, or
jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so
the above limitations or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights that vary from
state to state, or province to province, or jurisdiction to jurisdiction.
OBTAINING SERVICE
If service is required, do not return the product to your place of purchase.
In order to obtain warranty service, contact the Consumer Affairs Division at
1-800-323-9005, 7:30 a.m. – 5:00 a.m.
Central Standard Time, Monday through Friday. To assist us in serving you,
please have the model number and date of purchase available when calling.
After contacting the Consumer Affairs Division and it is determined that the
product should be returned for Warranty Service, please mail the product to:
BRK Brands, Inc., 3901 Liberty Street Road, Aurora, IL 60504-81229.
©2011 BRK Brands, Inc.
a Jarden Corporation Company (NYSE:JAH)
3901 Liberty Street Road, Aurora, IL 60504-8122
Phone:630-851-7330 Tech Services:
800-323-9005
www.brkelectronics.com
M08-0397-000
Documents / Resources
|
FIRST ALERT CM420 Digital Wired Indoor Outdoor
Camer
[pdf] User Manual
CM420 Digital Wired Indoor Outdoor Camera, CM420, Digital Wired Indoor Outdoor
Camera, Wired Indoor Outdoor Camera, Indoor Outdoor Camera, Outdoor Camera
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>