DawnSun FA0198A 1.5V Batteries Remote Control Instruction Manual

: June 17, 2024
: DAWNSUN

Table of Contents

FA0198A 1.5V Batteries Remote Control
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OPERATION INSTRUCTION

FA0198A 1.5V Batteries Remote Control

MODEL:
FA0198A
FA0198A-D

Note:
Install two AAA 1.5V batteries to the remote control.

Remote Control Functions:

FAN ON/OFF Button: Turn the fan on or off.
FAN Speed Button “-”: Decreases the fan speed.
FAN Speed Button “+”: Increases the fan speed.
2hr/4hr/ 8hr Timer button.
Reverse Setting Switch: To control fan direction.
Walk Away Delay Off Button.
Home Shield Button.
Nature Breeze Button.
LIGHT ON/OFF/DIMMING Button: To control light on/off/dimming.
CCT Function Button.
Extended Function Switch L.
FAN ON/OFF Button: Turn the fan on or off.
FAN Speed Button “-”: Decreases the fan speed.
FAN Speed Button “+”: Increases the fan speed.
2hr/4hr/8hr Timer button.
Reverse Setting Switch: To control fan direction.
Walk Away Delay Off Button.
Home Shield Button.
Nature Breeze Button.
LIGHT ON/OFF/DIMMING Button: To control light on/off/dimming.
CCT Function Button.
Extended Function Switch L.
Extended Function Switch R.
Extended Function Switch C.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.