AUSPURE KITCHEN AusFroth-06 Advanced Cafe Milk Frother User Manual

User Manual
Advanced Cafe Milk Frother
Model: AusFroth-06

AusFroth-06 Advanced Cafe Milk Frother

AUSPURE – SUPPORT
www.auspure.com/au | support.au@auspure.com

Thank you
Thank you for purchasing the Advance Cafe Milk Frother by Auspure Kitchen. We are committed to providing our customers with high quality products for having a reliable facilitated kitchen in their house.
Should you have any questions or concerns about using your Auspure products, feel free to contact our helpful customer support team at support.au@auspure.com We hope you enjoy using this product and we will be more than happy to  assist our valued customers for any inquiry related to Auspure products.

Copyright © Since 2021, Auspure Australia, All Rights Reserved.
This user manual is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of Auspure Australia.

PACKAGE CONTENTS

1 × Auspure Milk Frother
1 × Stainless Steel Milk Jug
1 × Chocolate Cover Whisk
1 × Mesh Tea Infuser
1 × Whisk Holder
1 × Frothing Whisk
1 × User Manual
1 × Warranty Card

TABLE OF SPECIFICATIONS

SAFETY INSTRUCTIONS

Please read carefully and make sure following all instructions provided in this user manual before using the product. Failure to comply with the instructions given in this user manual may result in serious injury and/or damage to you or  the product.

• Before using the Milk Frother for the first time, REMOVE and DISPOSE OF all packaging material and promotional labels carefully.

• Before discarding the packaging, double-check that you have received all indicated parts.

• MAKE SURE power supply matches with voltage indicated on this product before use.

• DO NOT touch any live part of the device when it is powered on.

• Frothing whisk is a choking hazard, close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.

• DO NOT place any part of product on or near gas, electric burner and in a heated oven.

• DO NOT let cord hang over edge of table or counter or touch the hot surface.

• DO NOT place the Milk Frother in a cabinet when in use.

• DO NOT operate the product with a damaged cord or plug, if its main cord is damaged, it must be replaced by the manufacturer, the nearest service agent or a qualified person.

• Using an accessory NOT recommended by the manufacturer for use with this appliance may result in fire, electric shock, or injury to persons.

• DO NOT immerse appliance, cord, or plug in water or other liquid.

• DO NOT place the base in dishwasher.

• ALWAYS unplug from outlet when not in use and before cleaning.

• To disconnect the machine from power outlet, gently grasp the plug and remove, DO NOT pull the cord.

• DO NOT use the product for other unintended purpose and place it in a dry storage.

• DO NOT use the Milk Frother unattended while it is operating.

• The appliance should NOT be operated by children NOR shall play with the appliance.

• DO NOT let children or people with reduced physical or mental capabilities to use or clean the Milk Frother.

• While operating the appliance, care should be taken to NOT get burned by the steam.

• DO NOT touch hot surface of the Milk Frother, use handles or knobs only.

• MAKE SURE to stand the appliance on a table or flat surface.

• DO NOT use cleansers, steel wool pads, or other abrasive material for cleaning the unit. When cleaning, only use a soft cloth and mild detergent.

• For reducing the risk of fire, DO NOT store anything directly on top of the Milk Frother when the appliance is in operation mode.

• DO NOT operate the appliance without full assembling of all parts.

• DO NOT overfill the water/milk for making tea, hot milk and chocolate from Max indication line. Also, DO NOT overfill the milk from max indication line for hot and cold milk foam.

• When assembling, using, or storing the milk frother, DO NOT put anything on top of it.

• PLACE the device at least 20 cm away from walls, drapes, and other heat or steam sensitive materials, with enough space above and on all sides to allow for air circulation.

• MAKE SURE to keep your milk frother clean at all times. Follow the cleaning instructions in this user manual.

• DO NOT attempt to disassemble this appliance for any reason. If your milk frother is broken or no longer functions properly, immediately discontinue use and contact customer support.

• This appliance is intended to be used in household and similar applications such as:
  – staff kitchen areas in shops, offices and other working environments
  – farm houses
  – by clients in hotels, motels, and other residential type environments
  – bed and breakfast type environments

• Misuse may cause injury.

KEEP THESE IMPORTANT SAFETY INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE

PARTS NAME

GETTING TO KNOW YOUR MILK FROTHER

Introduction
AusFroth-06 is an advanced and robust electric Milk Frother designed by Auspure kitchen. It is featured with six automatic settings which allows you to make warm and hot milk, hot or cold foam for frothy coffees including cappuccino  and cafe latte as well as making hot tea and chocolate milk.

Control and Settings

Whisk| Symbol| Function| Max  Capacity Temperature
---|---|---|---
| | Hot thick milk foam| 300 ml| 55-70 °C
| Hot thin milk
foam| 300 ml| 55-70 °C
| Cold milk
foam| 300 ml| No heat
| | Warm milk| 600 ml| 45-55 °C
| Hot chocolate| 600 ml| 70-85 °C
| | Hot milk tea| 600 ml| 80-95 °C

NOTE: The difference between hot thin and hot thick milk is the rotation speed to make different foam level.

BEFORE THE FIRST-TIME USE

Make sure to remove any advertising labels and packing materials from your Auspure Milk Frother before using it for the first time.
In warm soapy water, thoroughly clean the frother jug and its lid. Wipe the outside of the appliance with a soft damp cloth and let it dry completely. Your Milk Frother is now ready for real use.
IMPORTANT NOTE: Do NOT put the milk frother base, power cable, or plug in the dishwasher, and Do NOT submerge them in water or other liquids.

OPERATING YOUR AUSPURE MILK FROTHER

AusFroth-06 Milk Frother has six operating functions to assist providing different types of cafe style milk, chocolate, and coffee. By simply turning the position of the knob to desired option/mode, the milk will froth according to its preset setting.
General Instructions on Operating Your Milk Frother:

1. Make sure the product is assembled well.
2. Once connected to the power source, the buzzer will beep once, and white LED will turn on. After 30-sec, if there is no setting operation, the LED light will flash for 3 seconds and 3 beeps, then the light will turn OFF.
3. It is normal to have slight smoke when using this product for the first time.
4. If you unplug or disconnect the machine from power source during operation and connect the machine again later, there will be a beep with turning on the LED light. This indicates STAND BY mode.
5. When you switch the mode during operation, it beeps once, the blue LED light turns to white, and machine stops working. For operation again, you need to press the START button after selecting a new mode.

General Notes on Milk Frothing Functions:

1. The operating time varies with the environment, milk type and initial temperature of the milk.

2. Low-fat milk and skimmed milk with too low-fat content are not suitable for milk frothing. Both pure milk and whole milk can make milk froth.
   Whole milk has better milk froth and lasts longer.

3. After each use, it is recommended to wait for the Milk Frother to cool fully before use.

4. Each option is considered in different temperature range according to designed criteria for specific need.

For producing different types of milk, each of the preset option and its operation is described below:
Hot Thick Milk Foam /Hot Thin Milk Foam
For making Hot Thick Milk Foam or Hot Thin Milk Foam, follow the steps below:

1. Make sure the frothing whisk “ ” is properly attached to whisk holder inside the milk jug before operation.

2. Fill the jug with fresh milk up to Max level indicated for frothing (300 ml).

3. Connect the plug of milk frother to the power source according to its required standard rating power supply.

4. Turn the knob to the “ ” for Thick Milk Foam or “ ” for Thin Milk Foam.

5. Press the START/STOP button, the buzzer beeps once with the blue indicator light, the motor and heater will start to operate.

6. Once the temperature reaches 65 C the machine ends its operation. It beeps once and the blue indicator light turns to white (indicating STAND BY MODE).
   The milk foam is ready to use and for best result should be immediately used.

7. After 30-sec of not using the machine, the indicator light keeps flashing for 3 seconds with beeping 3 times and then stops and the LED light turns OFF.

NOTE-1: The heating and stirring option will be both functioning during this operation mode to produce proper Hot Thick or Thin Milk Foam.
NOTE-2: The preparation time of Hot Thick or Thin Milk Foam is about 5 min and depends on temperature reaching 65 °C. Once the built-in temperature sensor detects the preset temperature, it stops forthing.

Cold Milk Foam
For making Cold Milk Foam, follow the steps below:

1. Make sure the frothing whisk “ ” is properly attached to whisk holder inside the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for frothing (300 ml).
3. Connect the plug of milk frother to the power source according to its required tandard rating power supply.
4. Turn the knob to “ ” Cold Milk Foam mode.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator light, the motor will start to rotate.
6. The machine will end up its operation after 2 minutes and the LED light will turn into white from blue. It beeps once and the blue indicator light turns to white (STAND BY MODE).
7. After 30-sec of not using the machine, the indicator light keeps flashing for 3 seconds with beeping 3 times and then stops and light turns OFF.

NOTE-1: The only stirring option will be functioning during this operation mode to produce proper Cold Milk Foam. The built-in heater will not be active for this mode.
NOTE-2: The preparation time of Cold Milk Foam is 2 minutes. Once the preset build-in timer reads 2 minutes of operation, the frothing will end.

Warm Milk
For making Warm Milk, follow the steps below:

1. Make sure the frothing whisk and chocolate cover “ ” are properly attached to whisk holder inside the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for heating (600 ml).
3. Connect the plug of milk frothier to the power source according to its required standard rating power supply.
4. Turn the knob to the “ ” Warm Milk mode.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator light, the motor and heater will start to work.
6. Once the temperature reaches 50 °C the machine ends operation. It beeps once and the blue indicator light turns to white (STAND BY MODE).
7. After 30-sec of not using the machine, the indicator light keeps flashing for 3 seconds with beeping 3 times and then stops and light turns OFF.

NOTE-1: The heating and stirring option will be both functioning during this operation mode to produce proper Warm Milk.
NOTE-2: The chocolate cover whisk should be used for this function along with frothing whisk to prevent the milk producing foam.

Hot Chocolate
For making Hot Chocolate, follow the steps below:

1. Make sure the frothing whisk and chocolate cover “ ” are properly attached to whisk holder inside the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for heating (600 ml).
3. Connect the plug of milk frothier to the power source according to its required standard rating power supply.
4. Turn the knob to the “ ” Hot Chocolate mode.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator light, the motor and heater will start to work.
6. During operation, add the desired amount of coca powder, then put in the lid and let the liquid immersed the coca powder or chocolate pieces and to melt and produce fresh Hot Chocolate.
7. Once the temperature reaches 80 °C the machine ends operation. It beeps once and the blue indicator light turns to white (STAND BY MODE).
8. After 30-sec of not using the machine, the indicator light keeps flashing for 3 seconds with beeping 3 times and then stops and light turns OFF.

NOTE: The heating and stirring option will be both functioning during this operation mode to produce proper Hot Chocolate drink.

Hot Milk Tea
For making Hot Milk Tea, follow the steps below:

1. Make sure the frothing whisk, chocolate cover, and mesh tea infuser “ ” are properly attached to whisk holder inside the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for heating (600 ml).
3. Connect the plug of milk frother to the power source according to its required standard rating power supply.
4. Turn the knob to “ ” Hot Milk Tea mode.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator light, the motor and heater will start to work.
6. During operation, add the tea leaves in the tea making accessory. And then put in the lid and let the liquid immersed the tea leaves producing fresh Hot Milk Tea.
7. Once the temperature reaches 90 °C the machine ends operation. It beeps once and the blue indicator light turns to white (STAND BY MODE).
8. After 30-sec of not using the machine, the indicator light keeps flashing for 3 seconds with beeping 3 times and then stops and light turns OFF.

NOTE: The heating and stirring option will be both functioning during this operation mode to produce proper Hot Milk Tea.

CLEANING AND CARE

Care should be taken for last longing and perfect operation of your Auspure Milk Frother.
Both the milk jug and frothing whisk should be cleaned immediately after each use to prevent build-up of milk residue. For safe cleaning follow the instructions below:

1. Unplug the power cord from the power outlet before cleaning.
2. To avoid the risk of electric shock, do not clean the base or the power cord with water and do not immerse them.
3. The milk jug and frothing whisk will be hot immediately after use, so carefully remove the milk jug from the power base and fill with tap water. Once the milk jug and frothing whisk have cooled completely, remove the frothing  whisk and rinse OFF any milk in warm water.
4. Wash the milk jug, jug lid, and frothing whisk in warm soapy water.
5. Rinse and dry them thoroughly.
6. Store the cleaned milk jug, jug lid, and frothing whisk in safe place away from children.
7. The milk jug, lid and frothing whisk are dishwasher safe.

STORAGE

If not using your Milk Frother for an extended period of time, the following points must be considered for safe storage.

• Turn OFF the machine and then unplug from the power outlet.
• Follow the instructions on “CLEANING AND CARE” section to clean the unit and ready for storage.
• Store in a dry and safe place in upright position.
• Do not store anything on the top of the Milk Frother.

DISPOSAL

• To prevent possible harm to the environment or human health from uncontrol waste disposal, separate the unneeded Milk Frother and its related accessories from other types of wastes.
• Ask your local council where to dispose of your Milk Frother and its related accessories.
• You should not throw your Milk Frother and its related accessories away with the daily normal household waste.

TROUBLESHOOTING

properly into a
functioning outlet.
2| Milk is not foaming!| Milk might be too hot to foam.
1. Use the milk at refrigerator temperature.
2. Do not use low-fat milk and skimmed milk. Whole milk has better milk froth and its foam last longer.
3. Do not re-foam already heated milk.
4. Try to reduce the quantity of milk in the milk jug.
3| Milk is not heating!| 1. Ensure the milk jug is correctly positioned onto the power base.
2. Ensure that the Milk Frother has been properly turned on.
3. Check if it is in Cold Foam mode; it is normal, since the heating element does not enable in Cold Foam mode
4| Frothing whisk is
not moving or is
dislodged!| 1. Frothing whisk might not placed correctly.
2. The frothing whisk might have been taken out while working.
3. Ingredients might have been added too quickly.
•  Stop operation
•  Remove liquid from milk jug.
•  Place the frothing whisk inside the milk jug before turning on the milk frother.
•  Refill the milk jug with liquid.
•  Start frothing.
•  Add ingredients (if desired) slowly and in small  quantities after milk has already started frothing.
5| Milk Frother
stopped working| The product stops once it reaches the preset temperature in selected mode.
For each stopping criterion, read  pages 9-13.
6| Too much foam is
being generated| For making foam, there is MIN and MAX amount to be
added. The MIN is 125 ml and MAX is 300 ml
Check if the milk does not go over than MAX (300 ml)
for making foam options.

WARRANTY AND DISCLAIMER FOR PRODUCTS

Auspure Kitchen products are designed and manufactured to the highest quality standards. Your milk frother is covered for parts and labour for 2 years, which includes 1 year standard warranty and 1-additional year upon registration (free of charge within 14 days) from the date of purchasing.

of original purchase
Order Number| ……./……./……
Purchasing Store|

This warranty and disclaimer applies to all products purchased via the website www.auspure.com/au (hereinafter “Products”) or a third party seller authorised by Auspure.
Note: When the product is purchased from an authorised third party seller, for warranty claim, return and replacement of a defective product, the inquiry should be lodged via the related third party seller.
Warranty Against Defects
1.1 For Brand-new Products:
We provide a 12-month standard warranty against defects with the Products, from the date of purchase.
We provide an optional additional free 12-month extended warranty against defects with the Products (resulting in a 24-month warranty against defects with the Products, from the date of purchase).
In order to claim the additional 12-month extended warranty, you must register your Product (free of charge) online at www.auspure.com/au, within 14 days of the date of purchase. While registration, make sure that the related data  entry including the date of purchasing are accurate.
In the event of a defect with the Product, you may be entitled to have the Product replaced In order to be entitled to a replacement Product, you must:

• immediately stop using the Product; and
• notify us of the defect during the warranty period.

In order to claim a replacement Product, you must contact us using the details at the CUSTOMER SUPPORT section, to notify us of the defect, providing your proof of purchase and warranty registration confirmation as well as your contact details.
You may either:

• return the product for our further investigation; or
• send us a video of the defective Product, which demonstrates to our reasonable satisfaction that the Product is defective and undertake to safely dispose the defective Product. For safety reasons you must not continue to use the  defective Product.

Upon receipt of the defective Product, or a video of the defective Product, we will inspect it. If the defect is the result of a manufacturer fault, we will determine if the fault requires a replacement or repair and either send you a replacement Product or effect a repair.
This warranty against defects is in addition to any other rights and remedies to which you may be entitled under Australian law. To Clarify:

What is covered by the warranty:

• The repair or replacement of your Auspure product (at Auspure’s discretion) if the product is found to be defective due to faulty manufacture. Auspure reserves the right to determine if the fault requires a replacement or repair.
• Packaging and instructions of a faulty product may also be replaced if damaged.
• This warranty is valid for using your personal use of your device within Australia only.

What is not covered by the warranty:

• Using the products for commercial purposes, or anything other than normal
  domestic personal use.
  • Use of the product outside Australia.
  • Accidental damage or faults caused by negligence, misuse, vandalism or neglect.
  • Damage or faults caused by not following the instructions in the user manual.
  • Unsupervised use by children under the age of 18.
  • Repairs or alterations carried out by parties other than Auspure or an authorised agent.
  • Any other conditions not listed above, are not covered by Auspure warranty.

Except as otherwise provided by law, we accept no liability for any loss, damage or injury which may arise in any way from the use of the Product by you or by any other person.
Except as otherwise provided in this warranty and disclaimer, to the maximum extent permitted by law, we exclude all conditions and warranties implied by custom, law or statute, and we expressly disclaim all warranties of any kind including but not limited to implied warranties that the Product is fit for a particular purpose.
You hereby agree that we are not liable for any direct, indirect, consequential or incidental loss or damage which may result from your use of the Product.
Except as otherwise provided by law or as otherwise set out in this warranty and disclaimer, our liability to you shall be limited to the cost of replacement of the Product, together with your reasonable costs of postage and/or delivery in  connection with your returning of the Product.

(5) Indemnity
You agree to defend, indemnify and hold us and our officers, directors, employees, contractors, members, agents and licensees harmless from and against any and all claims, charges, actions, liabilities, investigations, demands and similar including but not limited to any costs, losses, damages whether direct, indirect, consequential or special and all legal fees resulting from your use of the Product, including but not limited
to any third party claims.

DEFECTIVE PRODUCTS AND RETURNS

Proved defective product meeting the specified warranty period, should be contacted Customer Support via support.au@auspure.com addressing your order number. Make sure to NOT dispose of your product before contacting us. Once our Customer Support Team has reached to your request approval, please return the unit with its order number.

AUSPURE CUSTOMER SUPPORT

Feel free to contact our helpful customer support team with any questions regarding your product!
Your satisfaction is our priority.
Ausbrilliant. PO Box 2, Ermington NSW 1700, Australia www.auspure.com/au
support.au@auspure.com
Please provide your order number when you contact our customer support services. Questions or Inquiries?
support.au@auspure.com
V1.1122

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>