GENERAL 70-152 Chuck Guard Instructions
- June 17, 2024
- GENERAL
Table of Contents
GENERAL 70-152 Chuck Guard
Specifications
- Chuck Guard Sizes: 52mm, 55mm, 65mm, and 75mm
- Part Numbers: 70152-01, 70152-02A, 70152-02B, 70152-02C, 70152-02D, 70152-03, 70152-04, 70152-05, 70152-06, 70152-07, 70152-08, 70152-09, 70152-10, 70152-11, 70152-12, 70152-13, 70152-14, 70152-15, 70152-16, 70152-17, 70152-18, 70152-19
- Quantity: 1 (for parts: 70152-01, 70152-02A, 70152-02B, 70152-02C, 70152-02D, 70152-03, 70152-04, 70152-05), Quantity: 2 (for parts: 70152-06, 70152-07, 70152-08), Quantity: 8 (for part: 70152-09), Quantity: 2 (for parts: 70152-10, 70152-11), Quantity: 1 (for parts: 70152-12, 70152-13, 70152-14), Quantity: 2 (for parts: 70152-15, 70152-16, 70152-17), Quantity: 1 (for parts: 70152-18, 70152-19)
Overview
Product Usage Instructions
Installation
- Make sure the power to the chuck is turned off.
- Remove any existing chuck guard from the chuck.
- Identify the appropriate chuck guard size based on your chuck diameter.
- Take the corresponding part number from the specifications section.
- Place the chuck guard over the chuck, aligning it properly.
- Secure the chuck guard using the provided screws and a screwdriver.
- Ensure that the chuck guard is firmly attached and does not obstruct the chuck’s movement.
Maintenance
To maintain the chuck guard’s effectiveness and prolong its lifespan, follow these guidelines:
- Regularly inspect the chuck guard for any damage or wear.
- Replace the chuck guard if any cracks or significant damage are observed.
- Clean the chuck guard regularly using a mild detergent and a soft cloth.
- Avoid using abrasive cleaners or solvents that may damage the chuck guard.
Frequently Asked Questions (FAQ)
Q: What are the sizes available for the chuck guard?
A: The chuck guard is available in four sizes: 52mm, 55mm, 65mm, and 75mm.
Q: How do I choose the correct chuck guard size for my chuck?
A: Measure the diameter of your chuck and select the corresponding chuck guard size based on the measurements provided in the specifications section.
Q: Can I use the chuck guard with any type of chuck?
A: The chuck guard is designed to be compatible with most standard chucks. However, it is recommended to verify the compatibility of the chuck guard with your specific chuck model.
Q: How do I clean the chuck guard?
A: Use a mild detergent and a soft cloth to clean the chuck guard. Avoid using abrasive cleaners or solvents that may damage the chuck guard.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>