HUSKY H52CH6HDV3 51.7 in. W x 21.7 D 15 Drawer Tool Chest and Cabinet Combo Instruction Manual

HUSKY H52CH6HDV3 51.7 in. W x 21.7 D 15 Drawer Tool Chest and Cabinet

Combo

Specifications

Product Name: Husky Industrial 51.7 in. W x 21.7 D 15-Drawer Tool Chest and Cabinet Combo with Pull-Out Workstation & LED Light in Textured Black

• Chest Model: H52CH6HDV3
• Cabinet Model: H52TR9HDV3
• Set Model: H52CH6TR9HDV3

Product Usage Instructions

Safety Information

1. Do not pull this unit, push it when moving.

2. Use the brakes when this product is not being moved. This prevents the product from rolling.

3. Secure this product properly before moving it with a forklift.

4. Do not tow the product with power equipment.

5. Do not alter this product in any manner. For example, do not weld external lock bars or attach electrical equipment.

6. When locking a chest/cabinet, close the drawers completely in order for the lock bars to work properly. CAUTION:
   Do not attach or mount this product to a vehicle. This may cause personal injury or product damage. Mounting this product to any vehicle in any manner will void the warranty.

7. CAUTION: Do not stand on this product. You may fall which may cause personal injury.

8. CAUTION: Be careful when opening more than one drawer. The product may become unstable and tip, which may cause personal injury or product damage.

9. CAUTION: Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an unlevel surface, which may cause personal injury or product damage.

10. CAUTION: Lock the drawers before moving this product. The drawers could come open and make the product unstable and tip, which may cause personal or product damage.

11. CAUTION: Be careful when closing the cover. Remove hands before the cover closes completely to prevent personal injury.

12.  Extension cord

13. Follow all Extension cord manufacturer’s Warnings and Instructions.

14. Do NOT insert extension cord through hole without grommet in place.

15. Only use a three-wire extension cord with all three prongs intact. Never remove the round grounding prong.

16. Extension cord must be connected to a 125 Volt GFCI protected outlet with proper ground. If GFCI outlet is not available, use an extension cord with GFCI protection built in.

17. Check the insulation and plugs of extension cord before using. Do NOT use cord if it is worn or damaged.

18. Do NOT overload extension cord.

19. Follow all Extension cord manufacturer’s Warnings and Instructions.

20. Do NOT insert extension cord through hole without grommet in place.

21. Only use a three-wire extension cord with all three prongs intact. Never remove the round grounding prong.

22. Extension cord must be connected to a 125 Volt GFCI protected outlet with proper ground. If GFCI outlet is not available, use an extension cord with GFCI protection built in.

23. Check the insulation and plugs of extension cord before using. Do NOT use cord if it is worn or damaged.

24. Do NOT overload extension cord.

25. Electrical Shock Hazard

26. Do not plug cord into outlet with wet hands.

27. Do not use this tool chest near a bathtub, a shower, or a swimming pool.

28. Chest/Cabinet plugs must match the outlet.

29. Never modify the plug in any way.

30. Do not use any adapter plugs with earth (grounded) chest power strips.

31. Unmodified plugs and matching outlets will reduce the risk of electric shock.
    Avoid body contact with earthed or grounded surfaces. There is an increased risk of electric shock if your body is earthed or grounded.

CAUTION: RISK OF ELECTRICAL SHOCK: This unit has two power supply cords. Make sure all cords are unplugged before any servicing or cleaning

WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received,  including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Assembly

Refer to the assembly instructions provided in the package for detailed steps on how to assemble the tool chest and cabinet combo.

Operation

To operate the tool chest and cabinet combo:

1. Ensure the product is placed on a level surface.
2. Unlock the drawers by turning the key in the lock.
3. Open the desired drawer by pulling on the handle.
4. To close a drawer, push it back into the cabinet until it is fully closed.
5. Lock the drawers by turning the key in the lock.

Cordless Power Tool Battery Chargers

Refer to the user manual of your cordless power tool battery charger for instructions on how to use it with this tool chest and cabinet combo.

Maintenance

To ensure proper functioning and longevity of the product, follow these maintenance guidelines:

1. Regularly clean the tool chest and cabinet combo using a damp cloth.
2. Avoid using harsh chemicals or abrasive cleaners that may damage the surface.
3. Inspect the product for any loose or damaged parts. Tighten or replace as necessary.

Replacement Parts

If any parts of the tool chest and cabinet combo become damaged
or need replacement, contact Husky customer support for assistance
in obtaining the appropriate replacement parts.

FAQ

Q: Can I mount this product to my vehicle?

A: No, mounting this product to a vehicle in any manner will void the warranty and may cause personal injury or product damage.

Q: Can I stand on this product?

A: No, standing on this product is not recommended as it may cause personal injury.

Q: What should I do if I experience instability or tipping when opening multiple drawers?

A: Be cautious when opening more than one drawer to prevent instability or tipping. Ensure the product is placed on a level surface and consider distributing the weight evenly across the drawers.

USE AND CARE GUIDE

Husky Industrial 51.7 in. W (double check)
x 21.7 D 15-Drawer Tool Chest and Cabinet
Combo with Pull-Out Workstation & LED

Light in Textured Black
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m – 7 p.m., EST, Monday-Friday
9 a.m – 6 p.m., EST, Saturday

1-888-HD-HUSKY
HUSKYTOOLS.COM

Warranty

The manufacturer warrants the product to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the products such as surface and/or weathering, as this is considered normal wear and tear.

The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.huskytools.com.

Specifications

NOTE: Begin product assembly close to t nal intended location of your chest/cabinet. This product is heavy and may be difficult to move after assembly.

Package Contents

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

NOTE : Chest Keys are attached to gas strut.

NOTE: Cabinet Keys are inside top drawer.

NOTE : Privacy Drawer Keys are inside drawer.

Assembly

CAUTION: Two people are recommended for assembly.

Attaching the cabinet handle

• Position the cabinet handle (C) over the holes on the cabinet (B).
• Attach with the bolts (CC) and tighten with supplied hex key (DD).

NOTE: The holes in the cabinet are tapped and do not require nuts.

NOTE: One handle comes with this cabinet and can be installed on either the left or right side. If a second handle is desired, please call 1-888-HD-HUSKY to order.

Attaching the bottle opener

• Position the bottle opener (F) over the holes on the cabinet (B).
• Attach with the bolts (CC) and tighten with supplied hex key (DD).

CAUTION: Do not over tighten the bolts.

Attaching the casters

CAUTION: Do not over tighten the bolts .

• Be sure the drawers are locked and lay the cabinet (B) on its top. Use packaging material to protect the finish.
• Attach the swivel casters (E) to the unit, on the same side as the handle (C), insert bolts (AA) through washers (BB) and swivel caster (E) into the cabinet (B).
• Tighten all casters with supplied hex key (DD) or 12 mm wrench/socket.
• Repeat this process for the fixed casters (D) on the opposite side of the cabinet (B).
• Return the cabinet (B) to its upright position.

Installing the Chest onto the Cabinet

CAUTION: Do not over tighten the bolts .

• Place the top chest (A) on top of the rolling cabinet (B).
• Attach the two brackets (G) over the holes at back of the product and secure with four bolts (CC) per bracket (G).
• Tighten all bolts (CC) securely with supplied hex key (DD).

Operation

Removing the drawers

• Fully extend the empty drawer.
• Push up the one release lever while pulling down on the other release lever.
• Pull the drawer outward until it is released from the drawer slide.

Re-inserting the drawers

• Extend the drawer slides.
• Insert the brackets on each side of the drawer into the slots in the slides, being careful that they are properly positioned.
• Once properly inserted, completely close the drawer to set the slides in their proper positions.

Usage of top till rubber grommet

• When passing cords into the box, be sure to always enter box from the rear. After head of cord is in place, slightly pull back 2-3” to ensure weather resistant ”star bursts” are facing toward the outside of box. Never push the cord from inside box so that mating plug points are exposed to the environment.
• BE SURE TO FOLLOW ALL ELECTRICAL SAFETY PRECAUTIONS.

Cordless Power Tool Battery Chargers

• See Charger’s Owner’s Manual for proper use and care of charger and batteries. Follow all Warnings and Instructions provided with your battery charger.
• Place chargers and electrical connections in till.
• Chargers are Dry location use only. Do NOT expose to liquid, vapor, or rain. Should your charger become wet. Do NOT attempt to use. Unplug extension cord from supply before handling wet charger or cords.
• Only use chargers and batteries that are intact and operating properly.
• Do NOT touch metal prongs when plugging charger into extension cord.
• Do NOT place or attempt to charge lead acid, car type batteries in storage chest.

Maintenance

Caster maintenance

Grease the casters annually using high-quality bearing grease.

Drawer maintenance

• Lubricate the slides semi-annually with high-quality bearing grease.
• Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and water.
• Remove grease and oil with a standard nonflammable cleaning fluid.

 Replacement Parts

For assistance with replacement parts please call 1-888-HD-HUSKY.

Questions, problems, missing parts? Before returning to the store call

Husky Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday
9 a.m. – 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Retain this manual for future use.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>