Kalamera KRC-12SS 12-Bottle Compressor Wine Cooler Instruction Manual

INSTRUCTION MANUAL
Compressor Wine Cooler
12-Bottle/18-Bottle/24-Bottle/101-Cans
MODEL: KRC-12SS/KRC-18SS/KRC-24SS/KRC-6893
Please read carefully and follow all safety rules and operating instructions.

Your Wine/Beverage Cooler

KRC-24SS
KRC-6893

1. Cabinet
2. Control Panel
3. Shelf
4. Glass Door
5. Retainer Bar
6. Handle
7. Foot
8. Bottom Hinge
9. Upper Door Hinge with Cover

Technical Data

38-65°F (3-18°C)
Net Weight| 37.5Ibs| 43.0Ibs| 47.0Ibs| 47.0Ibs
Gross Weight| 41.9Ibs| 46.6lbs| 52.9Ibs| 52.9Ibs
Product Size| 9.9×17.7×31.2| 13.6×17.7×30.3| 16.9×17.7×29.1| 16.9×17.7×29.1
Packing Size| 13.8×21.7×33. 5| 17.5×21.7×32.3| 20.7×21.5×31.5| 20.7×21.5×31.5

Electrical Circuit Diagram
For KRC-12SS / KRC-18SS:

For KRC-24SS / KRC-6893

Safety Precautions

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions.

• PLEASE READ all instructions before installing, operating, or servicing the appliance.

• Danger and Warning: Failure to follow this safety statement will result in severe personal injury or death, property, or equipment damage.

• RISK OF CHILD ENTRAPMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so children may not easily
  climb inside. Keep children away from the wine cooler, and avoid them putting fingers in the air outlet on the kick plate.

• SHOCK HAZARD – Electrical Grounding required.

•  Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected.

•  Never remove the round grounding prong from the plug and never use a two-prong grounding adaptor.

• Altering, cutting of power cord, removal of power cord, removal of power plug, or direct wiring can cause serious injury, fire or loss of property and life, and will void the warranty.

• Never use an extension cord to connect power to the unit.

• Always keep the working area dry.

Important Precautions

• Do not lift the unit by the door handle.
• Do keep the door closed before installing it into the cabinet.
• Be sure the kick-plate on the front bottom is free from obstruction. Obstructing free airflow can cause the unit to malfunction and will void the warranty.
• Allow the unit temperature to stabilize for 24 hours before use.
•  Do not block any internal fans.
• Use only genuine supplier replacement parts. Imitation parts can damage the unit, affect its operation or performance, and may void the warranty.

Installation Instructions

Before using your wine cooler:

• Remove the exterior and interior packing.
• Before connecting the appliance to the power outlet, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.
• To level your appliance, adjust the front legs at the bottom of the appliance.

Operating Your Wine/Beverage Cooler

• It is recommended that the wine Cooler be installed in an area where the ambient temperature is between 41-90ºF (5-32ºC).

• CONTROL PANEL
  

• SETTING THE TEMPERATURE CONTROL

•  Your Cooler is equipped with a control panel lock feature which will lock itself automatically 30 seconds after the last time a button is pressed.

• Press the button to unlock the control panel.

• You can manually adjust the temperature inside Cooler by pressing the buttons on the display panel. The two buttons on the panel and adjust the temperature in increments of 1ºC or 1ºF.

• You can select the temperature to display in Fahrenheit or Celsius by pressing the button for 3 seconds.

• You can turn the interior light on or off by pressing the button.

Note

• If the unit is unplugged, the power is lost or turned off, you must wait for 3 to 5 minutes before restarting the unit if you attempt to restart before this time delay, the Cooler will not start.
• When you use the Cooler for the first time or restart the Cooler after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the Cooler is running for a few hours everything will be back to normal.

Care and Maintenance

Cleaning your wine cooler

• Unplug the wine cooler and remove the bottles.
• Wash the inside with warm water or baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
• The outside of the wine cooler should be cleaned with a mild detergent or warm water.

Moving your wine cooler

• Remove all the bottles.
• Securely tape down all loose items inside your wine cooler.
• Turn the leveling legs up to the base to avoid damage.
•  Tape the door.
• Be sure the wine cooler stays in the upright position during transportation.

Trouble Shootings

You can solve many common wine cooler problems easily. Try the suggestion below to see if you can solve the problem before contacting the service center.

Wine coolers do not
operate.| Not plugged in using different voltage. The circuit breaker tripped or a blown fuse.
A wine cooler is not cold enough.| Check the temperature control setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have the correct clearance.
The light does not work.| The main control board does not work. PCB Problem.
There is some problem with the plug.
Vibrations.| Check to assure that the wine cooler is leveled.
The wine cooler seems to make too much noise| The wine cooler is not leveled. Check the fan.
The door will not close properly.| The wine cooler is not leveled.
The doors were reversed and not properly installed. The seal is weak.
The shaves are out of position.
LED could not display.| The main control board does not work. PCB Problem.
There is some problem with the plug.
LED display error.| Weak quality of display. The temperature point is out off.
Buttons are not functional.| The temperature control panel is damaged.

Warranty

ALAMEDA LIMITED WARRANTY
Limited One-Year Warranty

Warranty Terms:

The manufacturer warrants to the original purchaser of this product that the product will be free from manufacturing defects in workmanship and material for a period of 1 year from the date of original purchase when this major appliance is operated and maintained according to instructions attached to or furnished with the product.

The purchaser must contact the manufacturer’s Customer Service Department and provide a description of the defective part, including digital pictures if requested, with buying channel, serial number, order ID, and the original purchase documentation as validation of warranty coverage date.

Once confirmed that your appliance is eligible for the warranty service, the KALAMERA Customer Service Department will contact you by mail or phone about the maintenance solution. Replacement parts and/or units will be new, remanufactured or refurbished and is subject to the manufacturer’s discretion. KALAMERA is not responsible for damage resulting from shipper mishandling or improper packing. Do not return a defective product to the place of purchase. Products received without a return authorization number will be refused.

After receiving the unit, please do not remove, the altered original model/serial number, that will influence the after-sale service. Please carefully keep the user manual and warranty card for future reference.

If you need service, first see the “Troubleshooting” section of the User Manual. After checking, you may find additional help by mailing or calling us. Write down the following information about your product to better help you obtain assistance or service if you ever need it. You can find this information on the model and serial number located on the product.

Dealer name|
---|---
Model number|
Serial number|
Purchase date|

Warranty Exclusions:
The warranty will not apply if the damage is caused by any of the following:

1. Damage to the product due to misuse, mishandling, and abuse.

2. Product not assembled or installed according to manufacturer’s instruction.

3. Repairs by unauthorized persons or service centers with unauthorized spare parts.

4. Failure to provide reasonable and necessary maintenance.

5. An improper power supply such as low voltage, defective household wiring or inadequate fuses.

6. Accident, alteration, misuse, or abuse of the appliance such as using non-approved accessories, inadequate air circulation in the room or abnormal operating conditions,
   such as extreme temperatures.

7. Damage in transit or when moving the appliance.

8. Use of force or damage caused by external influences.

9. Store improper things.

10. Normal wear and tear.

11. Cosmetic damage, including scratches, dents, chips, or other damage to the finish of your product, unless such damage results from defects in materials or workmanship and is reported to us within 30 days from the date of purchase.

12. Fire, water damage, theft, war, riot, hostility, or acts of God such as hurricanes, floods, etc. In addition to consequential damage and incidental damages, such as damage to
    person or property is not coverable under this warranty.

13. Partially or completely dismantled appliances.

To obtain service or information, please send an email to
service@kalamera.com
Product contents and specifications may change without notice.
Copyright © 2022 KALAMERA INC
www.kalamera.com

Documents / Resources

| Kalamera KRC-12SS 12-Bottle Compressor Wine Cooler [pdf] Instruction Manual
12-Bottle Compressor Wine Cooler, Compressor Wine Cooler, Wine Cooler, KRC- 12SS, KRC-18SS, KRC-24SS, KRC-6893
---|---

References

• Kalamera

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>