Mrcartool S310 EV Home Charger User Manual

Mrcartool S310 EV Home Charger

Product Information

Specifications

• Structure Description: Galvanized steel body, Tempered glass panel
• Dimensions: 180 x 80 x 240 mm
• Installation Methods: Wall-mount / Column installation
• Weight: [Weight information not provided]

Product Usage Instructions

Safety Precautions

Please read and follow these safety precautions before using the product:

• Keep the product away from water and other liquids.
• Do not expose the product to extreme temperatures or direct sunlight.
• Ensure proper ventilation around the product during operation.
• Do not disassemble or modify the product without proper authorization.

Installation

The product can be installed using either wall-mount or column installation methods. Follow the steps below for installation:

1. Select a suitable location for installation.
2. If wall-mounting, use appropriate screws and anchors to securely mount the product on the wall.
3. If column installation is preferred, ensure the column is sturdy and provides adequate support.
4. Ensure the product is properly aligned and level after installation.

Operation

To operate the product, follow these steps:

1. Ensure the product is connected to a power source.
2. Press the power button to turn on the product.
3. Use the control panel or remote control (if provided) to navigate through the product’s features and settings.
4. Refer to the user manual for specific instructions on using different functions of the product.

Maintenance

To ensure optimal performance and longevity of the product, please follow these maintenance guidelines:

• Regularly clean the exterior of the product using a soft, dry cloth.
• Avoid using harsh chemicals or abrasive materials that may damage the surface.
• Do not allow dust or debris to accumulate around the product vents or openings.
• Periodically check and tighten any loose screws or connections.

Frequently Asked Questions (FAQ)

• Q1: Can the product be used outdoors?
• A1: The product is designed for indoor use only and should not be exposed to outdoor conditions.
• Q2: Can the product be connected to other devices?
• A2: Yes, the product may have connectivity options to connect with other devices. Please refer to the user manual for specific details on compatibility and connection methods.
• Q3: What should I do if the product malfunctions?
• A3: If you experience any issues or malfunctions with the product, please refer to the troubleshooting section of the user manual. If the problem persists, contact our customer support for further assistance.

Copyright Information

All rights reserved by SHENZHEN MRCARTOOL CO., LTD. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, recording, mechanical, electronic, photocopying or otherwise, without the prior written permission of MRCARTOOL. The information contained herein is designed only for the use of this unit. MRCARTOOL is not responsible for any use of this information as applied to other units.

Technical Parameters

Structure Description

• Shell Material: Galvanized steel body, Tempered glass panel
• Dimension: 180 x 80 x 240 mm
• Installation Methods: Wall-mount / Column installation
• Weight: <7kg
• Cable length: 8.5m
• Indicator Light: Blue, green, purple and red

Electrical Specifications

• Input Voltage: EU 220V / US 110V
• Input Frequency: EU 50Hz / US 60Hz
• Maximum Power: 7KW
• Output Voltage: EU 220V / US 110V
• Output Current: 32A
• Standby Power Consumption: 6W

Environment Specifications

• Applicable Scene: Indoor / outdoor
• Working Temperature: -30℃ ~ +55℃
• Working Humidity: 5% ~ 95% without condensation
• Working Altitude: <2000m
• Protection Level: IP65
• Cooling Method: Natural cooling
• Standards Compliant: SAE_J1772， IEC_61851-1
• MTBF: 8760hours

Safe Design

• Over-voltage protection
• Under voltage protection
• Overload protection
• Short circuit protection
• Earth leakage protection
• Grounding protection
• Over temperature protection
• Low-temperature protection
• Lightning protection

Installation Steps

• Positioning holes according to the size of the wall-mounted backplane, then punching holes of 4-φ6*35mm and inserting expansion tubes.
• Lock the 4-M4*32 self-tapping screws into the expansion tube, and fix the wall-mounted backboard on the wall.
• Open the upper cover of the charging pile, hang the pile on the wall-mounted backboard, and lock the screws from the bottom of the pile.
• Pass the power cable of 3*6mm through the corresponding waterproof head and connect it to the corresponding input terminal.
• Lock the screws of the upper cover panel.

Inspection & Debugging

Pre-operation inspection

• The installation location of the AC pile should be convenient to operate and maintain.
• Make sure the power cable of the AC pile is properly connected and securely installed.
• Make sure that the selection of a leakage protection switch at the AC inlet is appropriate.

Power on the equipment

• Close the leakage protection circuit breaker of the power supply line.
• After the AC pile is powered on, there will be a power-on self-check for about a few seconds, and the indicator light alternately displays red, yellow and green for 1S.
• Normal standby: the green light is always on.
• Equipment failure： the red light stays on.

The Operation of Charging

• Insert the EV charger (connect the charging plug).
• Start charging (Method 1: Plug the charger and start charging; Method 2: Use the designated charging card to swipe. The green light flashes indicating normal charging.) Swipe the card again to end charging.
• Method 1: Pull out the charger to end the charging; Method 2: Swipe the card again to end the charging.
• Put the EV charger back to its place.

Precautions

• For the first installation, attention should be paid to the power cable according to IN-L (fire), IN-N (zero), and PE (ground) one by one, and the firewire and zero wire cannot be reversed.
• PE (ground wire) needs to be grounded reliably.
• Make sure the emergency stop switch is activated after power on.
• Before charging, make sure that the tip of the EV charger is free from stains and water.
• It is prohibited to place the charging pile inside the car when charging.

Electrical Schematic Diagram

Installation Diagram

Wall-mount

Column installation

• Step 1: Make a cement base according to the drawings, and install expansion screws (M8*80).

• Step 2: Fix the column on the cement foundation (Note: first pass the cable through the column, then fix it).

• Step 3: Trim the cable, it is most appropriate for the cable to be 30cm higher than the column.

• Step 4: Pass the cable and other wires through the waterproof head at the bottom of the charging pile, fix the column and the pile with M5*10 hexagon socket screws, and connect the cable to the terminal.

Indicator Light Instruction

No.| Indicator light colour| Indicator light dynamic| Charging stations (piles) state
---|---|---|---
1| Blue| Always light| Standby
2| Green| Always light| Connect the charger
3| Green| 1s blink

once

| Charging
4| Yellow| Always light| Fully-charged
5| Red| Always light| Press E-stop
6| Purple| Always light| CP abnormal
7| Red| 1s blink once| Over-voltage/ under-voltage
8| Purple| 1s blink once| Ground wire not connected
9| Blue| 1s blink

once

| Over- current
10| Red Blue| Alternate

flashing 1s

| Electric leakage
11| Red-green| Alternate

flashing 1s

| Over- Temperature

Wiring Diagram

Special Note

This manual introduces the product Not Covered Warranty in detail including the functional features, working parameters, structure, operation methods and principles. The company reserves the right to change the product design and specifications. the physical configuration shall prevail on the content of the product packaging.

Warranty Service

There is a 2-year warranty for the MRCARTOOL product main unit and a 1-year warranty for the accessories since the day the customers received the product parcel.

Warranty Access

• Repair or replace the equipment will be done according to the specific fault conditions.
• We guarantee that all replacement parts, accessories or equipment are brand new.
• When there is a product breakdown that can not be solved within 90 days, the customer should provide a video and pictures as proof, we will bear the freight cost and provide the customer with the accessories in need to be replaced. After receiving the product for more than 90 days, the customer shall bear the freight cost, we will provide the accessory for free to replace.

Not Covered Warranty

• Items that come through the unofficial MRCARTOOL purchase channel.
• Product failure is caused by incorrect use of the product, use for other wrong purposes or human factors.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>