ZOUPW-Y100W-K Integrated Laminated Foldable Solar Panel User Manual

ZOUPW-Y100W-K Integrated Laminated Foldable Solar Panel

looW Integrated
Laminated Foldable Solar Panel With External Controller

USER MANUAL
Model: ZOUPW-Yl00W-K

l00W Foldable Solar Panel (with External Controller)

Thank you for choosing to purchase our solar panel. Before using, please read this user manual carefully to ensure your safety and proper use of this product.

Please confirm in advance whether the output parameters of this solar  panel match the input requirements of your power station. Failure to meet these requirements may result in damage to your equipment.

 Product Highlights

1. Utilizes high-performance, high-quality monocrystalline solar cells, achieving an impressive  conversion rate.
2. This product is foldable, and easy to carry, making it suitable for various outdoor applications.
3. This product adopts a waterproof, dustproof, wear-resistant, and high-temperature ­resistant ETFE surface protection layer.
4. Wide Compatibility, this portable solar panel can charge a variety of devices, including power stations via the MC4 interface with various adapters, and it can also charge smartphones, tablets, power banks, and other devices with USB-A or Type-C interfaces that support charging voltages above 5 volts through an external controller.
5. The USB-A and Type-C outputs of the external controller are intelligently controlled by IC chips, automatically matches the optimal charging efficiency for your devices. It also provides overvoltage  protection, overcurrent protection, short circuit protection, and overtemperature protection. The DC output has reverse charging protection.

 Specifications

Solar Panel
Max Power (at STC):| lO0W
Optimum Operating Voltage (VMP)| 20.76V
Optimum Operating Current (IMP)| 4.96A
Open-Circuit Voltage (VOC)| 24.3V
Short-Circuit Current (ISC)| 5.25A
Cell Type| Monocrystalline Silicon
Operating Temperature Range| -l0°C – 70°C
Folded Dimensions (mm)| 670 X 555 X 45
Unfolded Dimensions (mm)| 7220 X 555 X 25
Weight (kg)| 4.8± 0.7
Connector| MC4

STC (Standard Test Conditions): Refers to the solar panel’s surface temperature of 25°C, air mass of 7.5, and solar  radiance oflO00 W/m2.

External Controller

USB-A Output (2 Ports)| 5V/3A, 9V/2A, l2V/l.5A
Supported Fast Charging Protocols: Apple 2.4A, Qualcomm QC2.0 / QC3.0, Samsung AFC, MTK PEl.l / PE2.0, BCl.2, Huawei FCP / SCP, SFCP
Protection Functions: Overcurrent Protection, Overvoltage Protection, Undervoltage Protection, Short Circuit Protection, Overa l l Over tempera­ ture Protection
Type-C Output| 5V/3A, 9V/3A, 72V/3A, 75V/3A, 20V/3A
Supported Fast Charging Protocols: PD3.0 / PD2.0, Qualcomm Quick Charge 4.0+ / 4.0 / 3.0 / 2.0, PPS, Samsung AFC, Huawei FCP / Low Voltage SCP/ High Voltage SCP, MTK PE2.0 / PEl.l, SFCP
Protection Functions: Overcurrent Protection, Overvoltage Protection, Undervoltage Protection, Short Circuit Protection, Overall Over tempera­ture Protection
DC Output| Output Voltage: Solar Input Voltage minus 0.4V
Protect i on Function: 20A Reverse Charging Protection
Output Interface Specification: DC552l (Female)

Usage Method

1. Unfold the solar panel and place it in direct sunlight. Adjust the solar panel to ensure that the light source is perpendicular to the panel’s surface, achieving optimal charging efficiency.
   Diagram of the angle between sunlight and solar panel surface

2. The solar panel must be exposed to direct sunlight with no obstructions on its surface. Please use it under clear sunlight without clouds, trees, or buildings blocking the sunlight.

3. Please use a cable and appropriate adapters to connect the solar panel to your energy storage unit or other electrical devices.

4. Solar panel and power station connection instructions:

   • Connect the MC4 cable to the MC4 interface on the solar panel.
   • The output end of the MC4 cable includes DC5S27 (Male), DC7909 (Male). XT60 (Female). or Anderson (30A) connectors. Please choose the appropriate connector to connect to your power station for charging.
   • If necessary, you can use the provided DCS527 (Female) to DC6544/6330/S52S/SS27/ SS77/4877/4077/3S73S/74S0/795S (Male) adapters for connecting.
   • Please ensure that all connection cables, adapters, and ports are securely attached to ensure proper charging. You can check the charging status through the display screen or indicator lights on your powered devices.
     Solar panel and power station connection diagram

5. Solar panel and tablet, mobile phone, other electronic devices with USB-A/Type-C interfaces connection instructions:

   • Connect the MC4 cable to the MC4 interface on the solar panel.
   • Connect the controller to the DCSS27 (Male) interface at the output end of the MC4 cable.
   • Use a USB-A or Type-C cable to connect your tablet, mobile phone, or other electronic devices with USB-A/Type-C interfaces to the controller for charging.
   • Please ensure that all connection cables, adapters, and ports are securely attached to ensure proper charging. You can check the charging status through the display screen or indicator lights on your powered devices.
     Solar panel and tablet, mobile phone, other electronic devices with USB-A/Type-C interfaces connection diagram

6. Avoid exposing charging appliances to direct sunlight or overheating conditions. It is recommended to place the appliances in buildings, under trees, in tents, or other shaded areas. Additionally, be cautious not to use the solar panel to charge devices in high­ temperature environments (exceeding 60°C), such as closed cars after sun exposure, to prevent potential safety hazards.

Important Notes

1. Please avoid dropping, placing heavy objects, puncturing, throwing, or bending the solar panel  to prevent damaging the monocrystalline silicon pieces within it and affecting its performance. Any damage caused by external forces will result in the warranty being voided.
2. Never attempt to disassemble or modify the solar panel, as this may lead to unforeseen issues.
3. Regularly clean the solar panel by gently wiping it with a damp cloth. Do not use corrosive liquids to clean the solar panel, and avoid using high-pressure water jets, as excessive pressure might damage the solar panel.

 Frequently Asked Questions

1. Q: Is it waterproof?
   A: The solar panel of the device is rated IP67 for waterproof performance, Suitable for outdoor use. But the external control box is not waterproof. Please ensure the control box remains dry during use. If water accidentally enters the control box, make sure it’s completely dry before using. To extend the lifespan of the solar panel, please do not immerse it in water.

2. Q: Can the solar panels be connected in series or parallel?
   A: The solar panels can be connected in series or parallel via its MC4 interfaces. Connecting them in series increases the voltage, while connecting them in parallel increases the current, thereby increasing the total power. When considering series or parallel connections, please check the specifications of the solar controller and power station you are using to ensure they support higher input voltage and current. Th is wi II help prevent damage to your equipment. Additionally, choose the appropriate wire gauge based on the change in output current to ensure a safe connection.

3. Q: Why is my electronic device charging slowly or not charging?

4. A: Please check the environment and weather. Electricity generation may be reduced or disrupted during cloudy or rainy conditions.

5. Confirm that the solar panel is oriented towards direct sunlight. Adjust its position to ensure sufficient sunlight exposure on the surface.

6. Please check if the output cable is properly plugged in or if there are any defects or loose connections. Try reconnecting the output cable.

7. Please inspect the surface of the solar panel for any obstructions. Remove any obstacles if present.

8. Please check if your charging device is overheating. Some devices may automatically adjust their charging power or even pause charging based on temperature conditions. In such cases, please pause using the device or shut it down, wait for it to cool down, and then resume charging.

9. Q: What’s the difference between the nominal output power of the solar panel and the actual charging power?

10. A: The nominal output power is measured under STC (Standard Test Conditions), which involve a surface temperature of 25°C, air mass ofl.5, and solar intensity of 7000W/m2 -a globally recognized standard for ground solar panel testing. This is an idealized testing environment and may significantly differ from actual usage conditions.

11. Nominal output power is directly proportional to the power and quantity of solar cells used in the solar panel. Therefore, different models of solar panels may have different nominal output powers, and there is no direct one-to-one relationship with actual charging power.

12. Actual charging power is influenced by multiple factors, including the output parameters of the controller, sunlight intensity, the orientation and angle of the solar panel, environmental temperature, air mass, charging protocols, cable quality, and the maximum charging power supported by the connected devices. Additionally, some devices may accept different power levels at various stages of charging (for example, some appliances may reduce charging power when the battery level exceeds 50% to protect the battery). In summary, nominal output power represents the theoretical maximum output of the solar panel under ideal conditions, as measured in the standardized STC environment. Actual charging power, on the other hand, is influenced by various practical factors and may be lower than the nominal output power.

Packing List

Warranty Policy

We provide al-year warranty service for this product. Within one year from the date of purchase, if your solar panel experiences faults under normal usage, you can apply for war­ranty with your purchase receipt.
The following situations are not covered by the warranty:

1. Cosmetic flaws caused during use.
2. Product malfunctions resulting from self-disassembly, repairs, or human-induced causes.
3. Damages caused by uncontrollable factors such as natural disasters, thunderstorms, accidents, and the like.

Warranty Application Process:

1. Please contact our customer service team, providing the purchase receipt and a detailed description of the issue.
2. Our customer service team will assist you in submitting the necessary information and documents.
3. After confirmation, we will provide you with an appropriate warranty solution.

If you have any questions or need assistance, please feel free to reach out to us via the following email: zoupw-service@outlook.com

• Shenzhen Zhong pan Technology Co., Ltd.
• Website: www.zoupw.com
• Address: Unit 423, Building l, Mingliang Technology Park, No. 88 Zhuguang North Road, Taoyuan Street, Nanshan District, Shenzhen, Guangdong Province, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>