HUSKY 70233HTSP Metal Track Starter Pack User Guide

HUSKY 70233HTSP Metal Track Starter Pack

Specifications

• Item #1003011838 Model #70233HTSP
• Item #1003011839 Model #70234HTVP
• Item #1003011851 Model #70231HTRE
• Item #1003011862 Model #70232HTME

Product Information
The Husky Metal Track is designed for garage or basement applications. It comes in four different sizes: 36 inches, 48 inches, and 84 inches. The track is made of durable metal and can support a maximum weight limit of 100 lbs per linear foot (45.36 kg per 0.3 linear meter). The package includes the necessary hardware for installation, including track caps, Husky tracks, and screws.

Usage Instructions

Safety Information
Before installing the Husky Track or Husky Wall to basement walls, it is important to waterproof the basement to avoid damage from mildew. Even if the walls appear dry, they may become damp after covering with Husky Wall products. Additionally, always be aware of the weight limits of individual Husky accessories and follow all local codes and ordinances for the installation of Husky Wall panels.

Pre-Installation
Before starting the installation process, make sure you have the following tools: drill, stud finder, pencil, ladder or step stool, level, and tape measure. The package includes the necessary hardware for installation, which includes track caps, Husky tracks, and screws.

Hardware Included

• Track Cap (AA) – Quantity: 1
• Husky Track (BB) – Quantity: 1
• Screws (CC) – Quantity: 6 (for 36 IN. Track Starter Pack)
• Screws (CC) – Quantity: 6 (for 36 IN. Track Value Pack)
• Screws (CC) – Quantity: 8 (for 48 IN. Metal Track)
• Screws (CC) – Quantity: 12 (for 84 IN. Metal Track)

Installation

1. Start by planning the mounting location for the Husky Metal Track.
2. Using a stud finder, locate the studs on the wall where you want to install the track.
3. Mark the positions of the studs with a pencil.
4. Hold the Husky Track against the wall, aligning it with the marked stud positions.
5. Using a drill, secure the track to the wall by placing screws through the holes in the track and into the studs.
6. Repeat the process for each section of the track, ensuring that they are aligned properly.

Care & Cleaning
To clean the Husky Metal Track, simply wipe it with a damp cloth or sponge. Avoid using harsh chemicals or abrasive cleaners as they may damage the surface of the track.

Troubleshooting
If you encounter any issues during the installation process or have any questions about using the Husky Metal Track, please contact Husky Customer Service at 1-888-HD-HUSKY for further assistance. Questions, problems, missing parts?

Before returning to the store, call Husky Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday 9 a.m. – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM

THANK YOU
We appreciate the trust and confi dence you have placed in Husky through the purchase of this metal track. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Husky!

Safety Information

• Husky track or wall products are intended for garage or basement applications.
• Always be aware of noted weight limits of individual Husky accessories.
• Before installing the Husky Track or Husky Wall to basement walls, you must waterproof the basement to avoid damage from mildew. Despite the appearance of dryness, walls that appear dry may actually become damp after covering with Husky Wall products.
• Special attention to all local codes and ordinances should be taken prior to the installation of Husky Wall panels.

WARNING : Maximum weight limit is 100 lbs. per linear foot (45.36 kg. per 0.3 linear meter).

Warranty

LIFETIME WARRANTY
If your Husky product ever fails, bring it back and we will replace it free. This full warranty gives you specific rights, and you may also have other rights, which vary state to state. For details, visit your nearby store or call 1-888-HD-HUSKY.

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

Track Sizes
36 IN. / 48 IN. / 84 IN.

Installation

Planning the mounting location

• Mark the desired height of the Track on your wall.
• Draw a level line at this point. With a pencil, mark your stud locations on this level line.

Rail must begin and end on studs!
WARNING: Important- Rail must begin and end on studs!

• Mark the top holes at every stud (marked with an A in this drawing). Ensure each stud has two pilot hole marks.
• For details on wood screw positioning and placement see page 6.

Drilling the pilot holes
Drill 1/8 in. pilot holes in each “A” marking from previous step 2.

Placing the screws
Place two screws (CC) in all holes labeled “A” from previous step 2. (Each stud should have two screws in it.)

Installing multiple Tracks

• If desired, place multiple HuskyTracks (BB) next to one another repeating steps 1- 4.
• Once all HuskyTracks (BB) are anchored to the wall, place “Track Caps” (AA) into corresponding recesses on each Husky Track (BB).

Installing accessories
You can now attach any Husky Track accessories to your Husky Track.

Wood Screw Positioning

• Use two wood screws (CC) per stud
• If end of Husky Track overhangs a stud by more than 2 in., secure with drywall anchor.

Care and Cleaning

Husky Track is made from the highest quality materials and maintains a clean finish. Simply clean with a mild household cleaner or a feather duster to maintain your track system.

Troubleshooting

What surface can Husky Track or Husky Wall be installed over? Existing plaster, drywall, and concrete walls. To install over concrete walls use firing strips or a concrete drill bit and “tap con” flathead screws to attach the same way as you would into a stud wall (pre-drilling screw locations). How do I install Husky Track or Husky Wall over the brick wall? One way is to purchase concrete screws (the system comes with hardware for wood) along with a hammer drill. A second way is to fir out the wall using 2 in. x 2 in. studs. Anchor the studs to the concrete wall, a preferred method spacing them 16 in. off center. For added support when storing heavier items, we recommend installing a plywood sheet over the recently installed studs to help support our panels.
Can I add more Husky Track or Husky Wall when needed?
Yes, you can add more panels to your existing system as your storage needs arise. On each completed end, it is easy to configure connections that allow you to add additional panels as your needs change in the future. Can I cut Husky Track or Husky Wall? Yes, Husky Track or Husky Wall can easily be cut using a table saw, jig saw, or hand saw. For best results use a slider saw capable of making 12 in. or longer cut. Use a 90-tooth blade for a clean finish and then add our trim.

Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
https://manual-hub.com/

FAQ

Q: What are the weight limits for the Husky Metal Track?

A: The maximum weight limit for the Husky Metal Track is 100 lbs per linear foot (45.36 kg per 0.3 linear meters).

Q: What tools are required for installation?

A: The tools required for installation include a drill, stud finder, pencil, ladder or step stool, level, and tape measure.

Q: How do I clean the Husky Metal Track?

A: To clean the track, simply wipe it with a damp cloth or sponge. Avoid using harsh chemicals or abrasive cleaners.

Q: What should I do if I have missing parts or need assistance?

A: If you have missing parts or need further assistance, please contact Husky Customer Service at 1-888-HD-HUSKY.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>