iHome B96 Wireless Over the Ear Headphones User Manual
- June 16, 2024
- iHome
Table of Contents
iHome B96 Wireless Over the Ear Headphones
Introduction
Your new iHome Bluetooth stereo headphones are designed to link with your Bluetooth-enabled smartphone or music player to allow you to wirelessly listen to music and answer phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
What’s Included
Specifications
PREPARATION FOR USE
Controls and Indicators
- Voice Activation Button
- Volume Up / Next Track Button
- Multi-function Button (MFB): Power On/Off, Answer/End, Pair and Play/Pause
- Volume Down / Previous Track Button
- Light Mode Button
- Micro USB Charging Port
- Power/Pairing/Charging LED Indicator
- Auxiliary Input
- Microphone
Charging Your Headphones
IMPORTANT: Your headphone operates on a built-in rechargeable lithium-ion
battery. We recommend that you fully charge the battery for before first time
use.
- Connect the micro USB plug on the charging cable to the micro USB port on the headphone.
- Connect the standard USB plug on the charging cable to any standard USB power port such as found on a notebook computer, or the charging adapter for an iPod, iPhone, etc.
The Power/Charging/Pairing indicator will glow RED while the headphone is
charging. The indicator will turn off when the battery is fully charged.
Reminder: Allow the battery to fully charge for before first time use. Normal
recharge time after first use should take about 2 hours. When fully charged
the battery provides up to 27 hours of working time, or 90 days of standby
time.
Because your headphones use Bluetooth version 5 the battery level indicator of
the headphones may also appear on your smartphone home screen, usually
adjacent to the phone’s own battery level indicator, if your specific phone
supports this display function.
Multi-Function Button (MFB)
Pressing the button turns the headphones “On”, initiates pairing, answers/ends
phone calls, controls Play/Pause function and turns the headphones “Off’.
Switching the Power On and Off
- Press and hold the Multi-function button for approximately 3 seconds. The voice prompt will say “Power On” and the LED indicator turns BLUE and flashes two times per second.
- When the power is “On” press and hold the Multi-function button for approximately 3 seconds. The voice prompt will say “Power Off”. The LED indicator remains on briefly and then shuts off. This indicates that the power is “Off”.
Manually Pairing With a Bluetooth Enabled Smartphone or Music Player For
The First Time
If your smartphone or music player is Bluetooth compatible (supports the A2DP
Bluetooth Profile) you may pair these iHome headphones with your phone or
music player to listen to music and make or receive calls as long as the two
devices are within the Bluetooth operating range of approximately 33-feet of
each other.
Note: Your iHome headphones must be in the Power “Off” mode to begin the manual pairing process.
- Make sure that your headphones are switched “Off”. Make sure that your smartphone or music player is “On”.
- Press and hold the Multi-function button on your headphones for about 6 seconds until you hear the “Power On” and “Pairing” voice prompts. The LED indicator begins alternately flashing blue and red to indicate it is trying to pair with a compatible device.
- If necessary, turn on the Bluetooth function of your phone or music player so that it begins searching for a compatible device.
- “iHome_B96” should appear on your phone or music player’s compatible devices list. You may also see a message such as “Not Paired”. Tap on that message to complete the pairing process. If your phone or music player asks for a “password” to complete the pairing process, enter ‘0000’ on the keypad of your phone or music player.
- When pairing is successful the screen on your phone should show “iHome_B96 Connected” or a similar message and you will hear the voice prompt say “Your device is connected”. The LED indicator on the headphones will begin flashing blue two times per 5 seconds. Your headphones are now ready for use.
NOTE: If your headphones are not able to find a Bluetooth device that is in range and “discoverable” within 3 minutes, the headphones will automatically power “Off” to preserve the battery.
Auto-Linking With A Previously Paired Device
If your headphones were previously paired with a Bluetooth-enabled smartphone
or music player they will attempt to auto-link with that device again whenever
that device is within the Bluetooth operating range. Press and hold the Multi-
function button on your headphones for about 3 seconds until you hear the
“Power On” voice prompt. If a previously paired device is found to be within
range and turned ‘On’ the headphones will re-link with it automatically. You
will hear a beep tone and the voice prompt will say “Your device is
connected.”
Note: If no previously paired device is found after 3 minutes the auto- linking function stops and your headphones shut off automatically to preserve the battery life.
Wearing Your Headphones
Your iHome Bluetooth headphones are supplied with padded ear cushions for
long-wearing comfort. The headband can be extended to accommodate almost any
head size. There are ‘L’ and ‘R’ markings on the inside of the headband, When
the headphones are worn properly the controls will be on your right side.
Using Your Headphones
Note: Some of the functions described below may not be supported on your
specific smartphone. Check with your smartphone owner’s manual to confirm the
features supported by your phone.
Using Voice Activation
NOTE: The unit must be powered on and linked to an iOS or Android
Bluetooth device to use Voice Activation. Press and hold the Voice Activation
Button for 2 seconds and wait for beep to initiate voice activation with Siri
or Google Now.
Voice activation requires an active internet connection on connected Bluetooth
device with iOS 10 and Android 4.1 and later. When activated, the speaker
microphone acts as an extension of the microphone in your smartphone to
make/take calls, enable you to ask Siri®/Google Now™ to play music and more.
Using Light Mode
Press and hold the Light Mode Button for 1 second to turn the lighting effect
ON or OFF. When your headphones are paired with a Bluetooth device, press the
Light Mode Button once to select a ‘slow glow’, and press again for the light
to pulse along to your music.
Auxiliary Input Jack and Cable
The auxiliary input jack allows you to use your Bluetooth headphones as normal
headphones so that you can listen to music on any non-Bluetooth device that is
equipped with a 3.5mm headphone jack.
- Connect the included cable to the auxiliary input jack on the bottom of the “R” earpiece of your headphones, and to the headphone jack of your auxiliary music source.
Use the volume and track navigation controls on your music player as your would with any normal headphones. You may also use the one-button controller and microphone on the Auxiliary Input Cable to perform some or all of the following operations, depending on your specific smartphone or music player.
Answer / End Calls
When an incoming call is received briefly press the MFB once to answer the
call. To end the call, briefly press the MFB again.
Music Playback Control
If your phone or music player provides for this feature through its headphone
jack press the controller button once to begin playback and once again to
pause playback. Press the controller button twice to skip to the next track,
or three times to restart the current track or go to the previous track.
Voice Commands (For Aux-in Only)
If your phone or music player provides for this feature through its headphone
jack, press and holds the controller button on the auxiliary input cable to
activate your device’s voice commands menu. Once your device has launched the
voice command menu you may then speak your instructions into the microphone,
accessing features such as hands-free messaging, navigation, voice memo
recording, and more. For the specific commands and operations accessible
through your device’s headphone jack, please refer to the user manual of your
device.
NOTE: Not all of the hands-free functions are available on all phones. You may find that some functions may work with your phone while others do not. This is due to the design of your specific phone and is not an indication of any problem with the headphones.
TROUBLESHOOTING
Reception is noisy or intermittent
Make sure that the headphones and the paired device are within the Bluetooth
operating range of approximately 33 feet.
No Sound
Make sure that your headphones are properly paired and connected with your
Bluetooth-enabled smartphone or music player. Refer to the “Pairing”
instructions in this manual and in the manual supplied with your phone or
music player if necessary.
The rechargeable battery in your headphones may be exhausted and need to be
recharged. Refer to the “Charging Your Headphones” instructions in this
manual.
Unable to Pair/Connect
The pairing settings between the headphones and your smartphone or music
player may have been erased or deleted. Follow the “Pairing” instructions in
this manual to repair and reconnect the devices.
Turn off any other Bluetooth devices that are not being used to reduce
external interference.
Some Functions Do Not Work
Your specific model of smartphone may not support some of the functions
described in this manual. Refer to the manual supplied with your phone for
further information.
CARE AND MAINTENANCE
Always remember to turn your headphones off if they will not be used for a long period of time. Do not expose your headphones to extremely hot or cold temperatures for extended periods. Do not expose them to direct sunlight or leave them in places such as the dashboard of your car on a hot day. Prevent water or any other liquids from entering the cabinets of your headphones.
Protect Your Hearing
Using these, or any headphones at high volume levels for long periods can
result in permanent hearing damage. Always start listening with volume
controls on your headphones and your paired smartphone or music player at a
low level and then gradually increase the volume controls to a comfortable
listening level.
Important Notes
It is dangerous and illegal (in some jurisdictions) to use headphones when you
are driving a car, riding a bike or motorcycle, or operating a watercraft. Be
aware of local laws and regulations. Do not use these headphones in situations
where they might cause distractions or prevent you from hearing warning
sounds. There are no user-serviceable parts in these headphones. Do not
attempt any service or repairs on your own. Refer to the warranty for service,
repair or replacement information.
FCC INFORMATION
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Industry Canada licence- exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with Industry Canada RSS-247. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
LIMITED 1-YEAR WARRANTY
eKids warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required because of any defect or malfunction during the warranty period, eKids will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products that have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will eKids or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above- mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier’s check, or credit card) for purchase of your eKids product.
2017 eKids, LLC For questions or comments please call our toll-free number: 1-800-288-2792 Also visit our website: www.ekids.com 1299 Main Street Rahway, NJ 07065 Bluetooth is a registered trademarks of Bluetooth SIG Inc. Bluetooth technology is incorporated under license from Bluetooth SIG Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>