iHome IHV315 Bluetooth Rechargeable Speaker User Guide

: June 16, 2024
: iHome

Table of Contents

iHome IHV315 Bluetooth Rechargeable Speaker User Guide
GETTING STARTED
Speaker must be charged before use (about 2 hours).
WATER RESISTANT OPERATION
BLUETOOTH
SPEAKERPHONE
AUX-IN
WATER RESISTANT OPERATION
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iHome IHV315 Bluetooth Rechargeable Speaker User Guide

GETTING STARTED

Charging your speaker

Speaker must be charged before use (about 2 hours).

Connect small plug of the included USB charging cable to USB port located under the water resistant cover and connect the other end to a powered USB
Indicator will glow red while charging and turn off once charged.
Speaker should provide about 4 hours of audio when fully charged

WATER RESISTANT OPERATION

For proper water resistant operation, make sure the water resistant cover on the back of the unit is completely flush with the unit by pressing along the entire edge of the cover until it is completely and securely in place.

BLUETOOTH

Pairing establishes a unique communication connection between your Bluetooth device and the speaker. Once paired, you will be able to stream audio wirelessly to your Bluetooth Rechargeable Speaker.

When the speaker is powered ON it enters auto-link mode, searching for a previously connected Bluetooth If none is found, the unit switches to auto-pairing mode. The LED indicator on the front of the speaker will flash blue and tones will sound.
Turn on Bluetooth mode on your device (under Settings, Connections or similar).
Select “iHv315” on your device’s menu of Bluetooth When pairing is successful, the LED will turn solid blue. If prompted for a password, enter “0000” on your device. You can now begin to stream audio and calls from your device. The LED slowly flashes blue when audio is playing.
Press Play/Pause/Speakerphone Button to play/pause/resume Bluetooth Press and hold – or + Buttons to adjust speaker volume.
To pair other devices, press and hold the Play/Pause/ Speakerphone Button for 5 seconds to clear the current connection. Pair the new device per steps above. Press and hold both – and + Buttons for 5 seconds to reset the Bluetooth connection

SPEAKERPHONE

Press the Play/Pause/Speakerphone Button to answer or end a call.
Press and hold for 2 seconds to decline/ignore an incoming call.

AUX-IN

WATER RESISTANT OPERATION

For proper water resistant operation, make sure the water resistant cover on the back of the unit is completely flush with the unit by pressing along the entire edge of the cover until it is completely and securely in place.
Connect a standard 3.5 mm audio cable (not included) to the aux-in jack located on the back of the speaker under the water resistant cover and connect the other end to the headphone jack on your audio device. Power on the speaker. The LED indicator will slowly flash blue. NOTE: While using Aux- in, Bluetooth connection is disabled and media playback and volume adjustment must be controlled using your audio device.