JBL LSR4326P Professional Loudspeakers User Manual
- June 16, 2024
- JBL
Table of Contents
JBL LSR4326P Professional Loudspeakers
Product Information: LSR4300 Firmware Update
Specifications
- Firmware Version: 2.0 or later
- Operating System Compatibility: Macintosh OS10.3 (or later), Windows 2000, XP (or later)
Product Usage Instructions
Checking Firmware Version
- Power on the LSR4300 speakers.
- Observe the firmware version displayed on the speaker’s screen.
Firmware Update Process
Note : Before proceeding with the firmware update, read the READ-ME
file associated with the firmware files.
Macintosh:
- Insert the provided CD-ROM into your Macintosh computer.
- Drag the “Firmware 2.0 (or later)” folder from the CD-ROM to your computer desktop.
- Open the folder and click on the correct icon for the speaker model you intend to update.
- Install the DOTNETFX file located in the botnet folder.
- Double-click on dotnetfx.exe and follow the installation instructions.
- After completing the installation, click OK on the screen.
- Click UPDATE to start the firmware update process.
- If the update screen does not appear, check the USB connections and follow the directions on the display for STEP 1 above.
- Monitor the progress bar until it is filled with blue.
- Perform STEP 2 exactly as written on the screen.
- After completing STEP 2 correctly, the process will complete itself and a confirmation message will appear.
Windows:
- Insert the provided CD-ROM into your Windows computer.
- Open the “Firmware 2.0 (or later)” folder on the CD-ROM.
- Install the DOTNETFX file located in the botnet folder.
- Double-click on dotnetfx.exe and follow the installation instructions.
- After completing the installation, click OK on the screen.
- Click UPDATE to start the firmware update process.
- If the update screen does not appear, check the USB connections and follow the directions on the display for STEP 1 above.
- Monitor the progress bar until it is filled with blue.
- Perform STEP 2 exactly as written on the screen.
- After completing STEP 2 correctly, the process will complete itself and a confirmation message will appear.
Frequently Asked Questions (FAQ)
-
Q: Is it harmful to use LSR4300 speakers with differing firmware versions?
A: Using LSR4300 speakers with differing firmware versions is not harmful to any of the speakers. However, when speakers are connected in a network, some features may not work correctly. -
Q: Where can I find the latest information related to the firmware?
A: You can visit www.jblpro.com/lsr for the latest information related to the firmware update. Alternatively, you can contact JBL Customer Service at (800) 8JBLPRO or 800-852-5776 (Monday through Friday, 8:00am – 5:00 pm Pacific Coast Time) or visit www.jblproservice.com.
Important Information
About LSR4300 Firmware
When using speakers and subwoofers in a system, the version of firmware
installed in all units must be the same. LSR4328P, LSR4326P speakers produced
after October 2006 and, and LSR4312SP Subwoofers ship with version 2.0 or
later installed. LSR4326P and LSR4328P speakers produced before October 2006
ship with firmware version 1.1 installed and to use these speakers with a
subwoofer or recently produced LSR4300 speakers, the firmware must be updated.
A firmware update application, the required files, and installation procedures
are provided on a CD-ROM supplied with the subwoofer also in new LSR4300
Accessory Kits and also are available for download at
www.jblpro.com/lsr. For specific information
about the features of the specific firmware version, read the Firmware Version
Read Me file associated with the firmware.
To determine if the firmware in associated LSR4300 speakers requires an
update, determine the firmware version currently installed in each speaker
using this procedure:
-
Remove the power cord from the loudspeaker.
-
Reconnect the power cord to the loudspeaker.
-
Following a brief (2-second) start-up sequence, the front panel display will freeze for approximately 5 seconds with all buttons illuminated and the firmware version displayed on the level meter. The firmware version should be read as follows:
-
The number of green LEDs to the left of the -15dB mark indicates the 1’s digit of the firmware version.
The number of yellow LEDs to the right of the -15 dB mark indicates the 1/10ths digit of the firmware version. -
For example. Firmware v1.1 will be displayed as follows:
-
Firmware v2.2 will be displayed as follows:
If your Studio Monitors have firmware version 1.1 installed, use the firmware
update application to update each Studio Monitor to version 2.0 or later.
Before proceeding, read the READ-ME file associated with the firmware files.
Copy the contents of the CD to a Macintosh computer with OS10.3 operating
system (or later) or a PC with Windows 2000, XP operating system (or later) .
Click on the Flash Update application for Mac or Windows and follow the
prompts.
Notes:
- Using LSR4300 speakers with differing firmware versions is not harmful to any of the speakers. However, when speakers are connected in a network, features will not work correctly.
- A firmware update is not required unless you plan to introduce a subwoofer or newer LSR4300 speaker into an existing system.
If you experience any difficulties, go to
www.jblpro.com/lsr for the latest information
related to the firmware. Or contact:
JBL Customer Service (Monday through Friday)
8:00 am – 5:00 pm Pacific Coast Time In the U.S.A.
(800) 8JBLPRO or 800-852-5776
www.jblproservice.com
LSR4300 FIRMWARE UPDATE PROCEDURE
The following reviews the steps required to update firmware in LSR4300 Studio Monitors.
To install firmware files located on the CD-ROM:
- Drag the Firmware 2.0 (or later) folder from the CD-ROM to your computer desktop.
To install firmware files downloaded from the JBL website:
- If the firmware updater is downloaded from the JBL website, the. ZIP file can be extracted for you via Safari Web Browser ( on a Macintosh Computer), or using Stuffit Expander for Macintosh, available at http://www.apple.com/downloads/macosx/system_disk_utilities/stuffitexpander.html, or an appropriate expander for Windows-based computers.
- Connect the computer to the speaker USB port using a USB cable. For LSR4328P and LSR4326P model speakers, activate the LEFT Dip (set the switch to the UP position) and make sure all other DIP Switches are OFF (or down.)
- For LSR4312SP subwoofers, activate the SUB 1 DIP Switch (set the switch to RIGHT position) and turn other dip switches OFF (LEFT).
- Macintosh: You will see three icons. Click on the correct icon for the speaker model you intend to update.
- Windows: For the Windows operating system you will see these folders:
- Before installing the actual firmware you must install the DOTNETFX file. Open the dotnetfx folder.
- Click on “dotnetfx.exe”. Installation of this file takes several minutes.
- When the installation of “botnets” is complete, click on the folder and correct file type for the speaker model to be updated.
- MAC and Windows – You will see the following images on your screen. Follow the instructions exactly to perform the firmware update and repeat the procedure for each speaker in the system that requires an update.
STEP 1: After completing the steps shown on your screen, click OK Click UPDATE to start the firmware update process.
If this screen does not appear, you will see the above screen. Check USB connections, follow the directions on the display for STEP 1 above. You will see this display as the firmware update procedure progresses.
STEP 2 – When the “progress bar” is filled with blue perform the steps above exactly as written.
If STEP 2 was not performed correctly this message will appear. Follow the directions on this screen.
When STEP 2 is performed correctly, the process will complete itself and this message will appear.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>