JENSEN MWR150 Wired Remote Instruction Manual

: June 16, 2024
: Jensen

Table of Contents

INTRODUCTION
INSTALLATION
OPERATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MWR150 Wired
Remote Installation and Operation Instructions

INTRODUCTION

Thank you for choosing a Jensen product. The MWR150 Marine Wired Remote Control allows you to control basic functions of most Jensen Marine MS series radios, including power, mode, volume, tuning and CD, iPod and satellite radio operation.
FEATURES

Compatible with JENSEN Marine MS Series radios with remote control capability ONLY
Waterproof design (IPX6 Rated)
Conformal Coated circuit boards
White LED backlit controls and LCD
Full function sunlight readable display (positive type LCD)
UV resistant finish (meets ASTMDA4329 standards) resists yellowing in sunlight
Corrosion resistant materials (meets ASTMB117)
Panel mount with removable trim ring
20 ft. extension cable included
FCC/CE certified

INSTALLATION

Choose a mounting location on the instrument panel that will allow enough room behind the panel to run the wired remote cables to the existing radio.
Cuta holein the instrument panel using the supplied template (See “Mounting Template” on page 2). At least 1” depth is needed to mount the remote control.
IMPORTANT! Do not mount unit where it can be submerged.
Insert the remote control into the hole and then secure with two #6 Pan Head Screws, at least 3/4” long, illustrated in Figure A.

WIRING
Once the remote has been mounted, route the cable from the remote and connect the cable to the radio. Note the connector polarity on the extension cable. The 18 foot extension cable may be used to connect the remote to the radio. Up to two additional extension cables (MWREXT) may be purchased and used to extend the reach of the remote up to 54 feet.
IMPORTANT! When connecting the cables, be sure to route the extension cable away from sharp objects, corners, and places where it might get pinched, as this could affect performance and cause damage to the unit. Up to two more remote controls can be added with a “Y” cable adapter (MWRYCBLS).

OPERATION

| AM/FM Tuner| CD| MP3 Playback Mode| iPod| Satellite Radio
---|---|---|---|---|---
Control| Action| Default Mode 7| Mode| Main Mode| Main Mode| Main Mode
POWER| Press| Power On/Off| Power On/Off| Power On/Off| Power On/Off| Power On/Off
MODE| Press| Select Next Mode| Select Next Mode| Select Next Mode| Select Next Mode| Select Next Mode
BAND| Press| Preset Band Change| | | | Preset Band Change
VOL A UP| Press| Volume Increase| Volume Increase| Volume Increase| Volume Increase| Volume Increase
VOL V DN| Press| Volume Decrease| Volume Decrease| Volume Decrease| Volume Decrease| Volume Decrease
INFO| Press| Clock Display Toggle| —| Display/ Toggle Artist/ Song/Etc.| Display/ Toggle Artist/ Song/Etc.| Display/ Toggle Artist/ Song/Etc.

/I I MUTE| Press| Mute| Pause| Pause| Pause| Mute
<<| Press| Tune Down| Track Down| Track Down| Song Down| Channel Down
Hold| Tune Seek Down| Rewind| Rewind| Rewind| —

| Press| Tune Up| Track Up| Track Up| Song Up| Channel Up
Hold| Tune Seek Up| Fast Forward| Fast Forward| Fast Forward| —

iPhone, iPod nano and iPod touch are trademarks of Apple Inc. registered in U.S.A. and other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect ireless
performance.
MOUNTING TEMPLATE JENSEN MWR150 Wired Remote - fig
1