JVC GD-V42XX Series Speaker Unit Installation Guide

JVC GD-V42XX Series Speaker Unit

Product Information

Specifications

• Product Name: TS-C421SPG
• Installation Manual: TS-C421SPGU
• Model Number: LCT1425-001A
• Language: English

Safety Precautions
Various symbols are indicated on the product and in the Installation Manual to prevent physical injury and material damage. It is important to understand the meaning of these symbols before using the product.

• General caution: Failure to observe may lead to physical injury and material damage.
• Prohibited: Disassembling is prohibited.
• WARNING: Failure to observe may lead to physical injury and material damage. Extreme caution should be exercised.
• CAUTION: Failure to observe may lead to physical injury and material damage. Extreme caution should be exercised.
• General instruction: Follow the instructions provided in this manual.

Accessories
Check that you have received all the supplied accessories. Contact your dealer if anything is missing.

• Front speakers (L,R) x 2
• Speaker cords (1.2 m x 2)
• Cord clamps x 2
• Mounting screws (for the GD-V42XX series display) x 6

Names of Parts
The product consists of the following parts:

• Front Speaker Unit
• Saran Net: Protects the speaker
• Speaker Bracket: Attaches to the back of the display
• Speaker Terminal: Connects to the display using the supplied speaker cords

Product Usage Instructions

Attaching Front Speakers to Displays other than GD-V42XX Series

1. Loosen the mounting screws on the back of the display using a Phillips screwdriver, leaving a length of about 3 mm.
2. Attach the front speaker to the back of the display by hooking the speaker bracket onto three mounting screws through the screw holes (A), and sliding it down.
3. Tighten the mounting screws firmly using a Phillips screwdriver.

Make sure not to place anything susceptible to magnetism near the speakers, such as a video tape.

Connecting the Speaker Cord

Attach to the Speakers:

1. Fold the end of each speaker cord.
2. Press and hold the terminal clamp.
3. Insert the speaker cord and release the finger from the terminal clamp.

Attach to the Display:

1. Open the terminal clamp.
2. Insert the speaker cord.
3. Close the terminal clamp.

Bundling the Speaker Cords
You can neatly bundle the speaker cords using the supplied cord clamp.

Attaching Front Speakers to GD-V42XX Series Display

1. Remove the protective screws on the back of the display using a Phillips screwdriver.
2. Place the front speaker on the back of the display so that the screw holes (B) of the speaker bracket align with those of the display.

FAQ

• Q: What should I do if any accessories are missing?
  A: If any accessories are missing, please contact your dealer immediately for assistance.

• Q: Can I place anything susceptible to magnetism near the speakers?
  A: It is not recommended to place anything susceptible to magnetism, such as a video tape, near the speakers.

• Q: How do I bundle the speaker cords neatly?
  A: You can use the supplied cord clamp to bundle the speaker cords neatly.

SPEAKER UNIT

INSTALLATION MANUAL
SPEAKER UNIT FOR A JVC PLASMA DISPLAY MONITOR

SAFETY PRECAUTIONS

Regarding the “safety precaution”

symbols

• Various symbols are indicated on the product and in this Installation Manual.
• These symbols are provided in order to prevent physical injury and material damage. Be sure you understand the meaning of the symbols before reading this manual.

Explanation of symbols

• This symbol (including a warning) indicates that CAUTION should be exercised.
• Prohibited actions are indicated by the following symbols.
• Actions that should be performed (compulsory and instructed actions) are indicated by the following symbol.
• WARNING
  • Failure to observe what is mentioned under this symbol could lead to physical injury and material damage. Extreme caution should be exercised.
  • Do not modify (disassemble) the front speakers.
• This could result in fire or electric shock.
• CAUTION
  • Failure to observe what is mentioned under this symbol could lead to physical injury and material damage. Extreme caution should be exercised.
• Connect the power cord plug to a wall outlet only after all necessary equipment has been connected.
• Making connections while the power cord plug is connected to the wall outlet could result in electric shock.

Accessories

Check to be sure you have all of the supplied accessories. The number in the parentheses is the quantity of the pieces supplied. If anything is missing, contact your dealer immediately.

Names of parts

Front

1. Speaker unit

2. Saran net
   This net protects the speaker.
   Back

3. Speaker bracket
   Attach to the back of the display.

4. Speaker terminal
   Connect this terminal to the speaker terminal on the display using the supplied speaker cords.

Attaching the front speakers to displays other than the GD-V42XX series

Using the speaker brackets, you can attach the front speakers to the side of the display.

• For attaching the front speakers to the GD-V42XX series display, see page 4.
• In this section, the GM-P420 series displays are shown in the illustrations. The mounting screw positions of the other displays are almost the same as those of the GM-P420 series, therefore you can attach the front speakers as in the procedure below.
• Do not loosen the screws other than the mounting screws.
• Use only the screws already attached to the display.

1. Loosen the mounting screws on the back of the display.
   Loosen the mounting screws with phillips screwdriver, leaving a length of about 3 mm.

2. Attach the front speaker to the back of the display.
   Hook the speaker bracket onto three mounting screws through the screw holes (A), and slide it down.

3. Tighten the mounting screws firmly with phillips screwdriver.

• When moving the display, do not hold the speakers.
• The speakers are not of anti-magnetic type.
• Do not place anything susceptible to magnetism, such as a video tape, nearby when setting the speakers.

Connecting the speaker cord

Attach to the speakers
When you connect the supplied speaker cord to the terminal clamp of the speakers, fold the end of each speaker cord to avoid short-circuit.

1. Fold the end of each speaker cord.
2. Press and hold the terminal clamp.
3. Insert the speaker cord, and release the finger from the terminal clamp.

• Connect the cord with black stripes to the – (black) terminal and the other cord to the + (red) terminal.
• Be careful that connection of the speaker cords to incorrect polarity terminals (+ and -) degrades stereo feeling and sound qualities.

Attach to the display

1. Open the terminal clamp.
2. Insert the speaker cord.
3. Close the terminal clamp.

• Connect the cord with black stripes to the – (black) terminal and the other cord to the + (red) terminal.
• Be careful that connection of the speaker cords to incorrect polarity terminals (+ and -) degrades stereo feeling and sound qualities.

Bundling the speaker cords
You can bundle the speaker cords neatly with the supplied cord clamp, as illustrated.

• Stick the cord clamp after removing its protective seal. Give an amount of time before bundling the speaker cords, or the cord clamp may be detached.
• If you are sticking the cord clamp to the back of the display, be careful not to block the ventilation hole.

Attaching the front speakers to the GD-V42XX series display

Using the speaker brackets, you can attach the front speakers to the side of the display.

• Do not loosen the screws other than the protective screws.
• Use only the supplied mounting screws for attaching the front speaker.

1. Remove the protective screws on the back of the display with phillips screwdriver.
   Before removing them, make sure which screws to be removed by placing the front speaker.

2. Place the front speaker on the back of the display so that the screw holes (B) of the speaker bracket are put on those of the display.

3. Tighten the three supplied mounting screws firmly with phillips screwdriver.
   Use the rest of three supplied mounting screws on the other side.

• When moving the display, do not hold the speakers.
• The speakers are not of anti-magnetic type.
• Do not place anything susceptible to magnetism, such as a video tape, nearby when setting the speakers.

Connecting the speaker cord

Attach to the speakers
When you connect the supplied speaker cord to the terminal clamp of the speakers, fold the end of each speaker cord to avoid short-circuit.

1. Fold the end of each speaker cord.
2. Press and hold the terminal clamp.
3. Insert the speaker cord, and release the finger from the terminal clamp.

• Connect the cord with black stripes to the – (black) terminal and the other cord to the + (red) terminal.
• Be careful that connection of the speaker cords to incorrect polarity terminals (+ and -) degrades stereo feeling and sound qualities.

Attach to the display

1. Press and hold the terminal clamp.
2. Insert the speaker cord, and release the finger from the terminal clamp.

• Connect the cord with black stripes to the – (black) terminal and the other cord to the + (red) terminal.
• Be careful that connection of the speaker cords to incorrect polarity terminals (+ and -) degrades stereo feeling and sound qualities.

Bundling the speaker cords
You can bundle the speaker cords neatly with the supplied cord clamp, as illustrated.

• Stick the cord clamp after removing its protective seal. Give an amount of time before bundling the speaker cords, or the cord clamp may be detached.
• If you are sticking the cord clamp to the back of the display, be careful not to block the ventilation hole.

Specifications

• Power Handling Capacity : 3 W
• Impedance : 6 Ω
• Speaker : 9.5 cm x 1 cm
  • Direct Drive Speaker, two
• Dimensions
  • (W x H x D) : 43 mm x 640 mm x 43 mm
  • (Mass) : 0.7 kg (for each excluding the speaker bracket)

© 2003 VICTOR COMPANY OF JAPAN, LIMITED

Documents / Resources

| JVC GD-V42XX Series Speaker Unit [pdf] Installation Guide
GD-V42XX Series, GD-V42XX Series Speaker Unit, Speaker Unit, Unit
---|---

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>