JVC HA-S31M On Ear Lightweight Headphones User Manuals
- October 27, 2023
- JVC
Table of Contents
JVC HA-S31M On Ear Lightweight Headphones
SAFETY INSTRUCTIONS
“SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT”
- This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
- Do read the operating instructions before you attempt to use the equipment. Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.
- Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
- Do be careful with glass panels or doors on equipment.
- DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way- switch off-withdraw the mains plug and consult your dealer.
- DON’T remove any fixed cover as this may expose dangerous voltages.
- DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.
- Switch off using the switch on the equipment and make sure that your family know how to do this.
- Special arrangements may need to be made for infirm or handicapped people. DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.
- DON’T listen to headphones at high volume as such use can permanently damage your hearing.
- DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
- Overheating will cause damage and shorten the life of the equipment.
- DON’T use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.
- DON’T allow electrical equipment to be exposed to rain or moisture.
- NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case. This could result in a fatal electrical shock.
- NEVER guess or take chances with electrical equipment of any kind. It is better to be safe than sorry!
INTRODUCTION
Thank you for purchasing this JVC product. Before you begin operating this unit, please read the operating instructions carefully to be sure you enjoy the best possible performance. If you have any questions, please consult your JVC dealer.
OPERATING THE REMOTE CONTROL
AUDIO/PHONE OPERATION (EXAMPLE FOR IPHONE)
- This unit can not guarantee operation of all of the remote control functions.
- This unit supports smartphones with a 4-pole plug headphone jack. Any devices with a 3.5 mm 3-pole or 2-pole plug headphone jack are not supported.
For some mobile phones, you may not be able to use some or all functions depending on the specifications of the mobile phone itself.
PRODUCT DESCRIPTION
Flat foldable headphones that are lightweight and comfortable headphones for daily casual use With the handy remote control button on the headphones, you can play, stop, or skip tracks, as well as being able to answer phone calls. The Flat Foldable swivel design makes the headphones compact and easy to store in your bag when travelling.
FAQs
How can I determine whether my JVC HA-S31M headphones are balanced?****
“Control Panel” window should now be open. Look for “Sound” and click on it. Right-click on your headphones and choose “Properties.” The “Levels” tab can be selected. The “Balance” button on your device’s right should be pressed.
How can I determine whether the JVC HA-S31M headphones I own are damaged?****
There are rattling sounds and/or distorted sounds audible. When using Bluetooth headphones, there is no sound. When using Bluetooth headphones, there is a delay. You hear static when using wireless headphones. There is only one useful side or ear. You have a bent headphone jack or plug.
JVC HA-S31M headphones—can they be repaired?****
Headphone repairs are offered by a number of audio and electronics retailers. If you can’t find a nearby repair shop, think about shipping your headphones to the manufacturer or another repair facility for a fix. Your headphones may be covered by a warranty depending on the issue.
Why can’t I hear anything with my headphones?****
Make sure your audio source is turned on and amplified. Use caution when dialling up the volume on any knobs or buttons that your headphones may have. Make sure the battery has enough power if you use battery-operated headphones. Check the headphones’ connection.
Why do I just use one set of JVC HA-S31M headphones to listen?****
Click [Accessibility] after swiping down the menu. Tap [Hearing improvements] after that. [Mono audio] will have a toggle option. Ensure that [Off] is selected on the toggle switch.
How are they fixed if only one JVC HA-S31M headphone is working?****
Make the earphone cord straight. Use a different set of earbuds if you can. Make the headphone jack seem nice. Restart the apparatus. Check the audio settings on the gadget. Examine the earphone cables for wear.
How can I check the JVC HA-S31M headset’s microphone?****
Activate your preferred web browser. In the search box of your preferred browser, enter “sound recorder.” That search ought to yield a tonne of outcomes, some of which will be gratis. Record your voice while using the headset, just like with Windows, and then play it back to hear how you sound.
How can I make sure my JVC HA-S31M headphone microphone is working properly?****
Click “Audio” in the lower right corner of your screen using the mouse. Your computer’s sound options are shown; scroll down until the “Test your microphone” option is clear. Click Troubleshoot beside the option to begin troubleshooting your microphone.
Why are my JVC HA-S31M wired headphones acting up?****
Examine your headphones’ connector, cord, remote, and earbuds for signs of wear or damage. Check each earbud for dirt on the meshes. Use a small, dry brush with clean, soft bristles to gently remove debris from all openings.
My JVC HA-S31M headphones aren’t working; why?****
Examine your headphones’ connector, cord, remote, and earbuds for signs of wear or damage. Check each earbud for dirt on the meshes. Use a small, dry brush with clean, soft bristles to gently remove debris from all openings. Reattach your headphones firmly.
How can you turn on the JVC HA-S31M headphones’ pairing mode?****
Examine your headphones’ connector, cord, remote, and earbuds for signs of wear or damage. Check each earbud for dirt on the meshes. Use a small, dry brush with clean, soft bristles to gently remove debris from all openings. Reattach your headphones firmly.
How can you turn on the JVC HA-S31M headphones’ pairing mode?****
When you remove the earphones from the charging case, the “pairing mode” indicator lights on them will begin to flicker red and blue. Your mobile device needs to have Bluetooth switched on.
How do I assemble my JVC HA-S31M headphones?****
Before using your True Wireless Earbuds, make sure they are fully charged. Lift the charging case’s lid once the charging is finished. The case for the two earbuds can be opened. You can search for and link other earphones on your device’s Bluetooth list once only one earbud’s indicator light is flashing.