KENWOOD CMOS-740HD Universal Rear View Camera Instruction Manual

KENWOOD CMOS-740HD Universal Rear View Camera

Product Information

Specifications:

• Brand: KENWOOD
• Model: CMOS-740HD
• Type: Universal Rear View Camera
• Country of Origin: Japan

Product Usage Instructions

Installation:

1. Mount the rear view camera at the desired location on your vehicle.
2. Connect the camera to a power source using the provided cables.
3. Adjust the angle of the camera for optimal viewing.

Operation:

1. Turn on the display unit in your vehicle that is connected to the rear view camera.
2. When in reverse gear, the camera feed should automatically display on the screen.
3. Use the guidelines on the screen to assist with parking and reversing maneuvers.

Maintenance:

Regularly clean the camera lens and housing to ensure clear visibility.

Troubleshooting

If you encounter issues with the camera feed, check the connections and power source first.

FAQ

Q: How do I know if the camera is properly installed?

A: You can test the camera by engaging reverse gear and checking if the feed displays on the screen.

Q: Can I install this camera on any vehicle?

A: The camera is designed as a universal fit, but it’s recommended to check compatibility with your specific vehicle model.

Q: How do I adjust the camera angle?

A: The camera typically comes with adjustable mounting brackets or screws for angle adjustment.

Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new Camera.

For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
Model CMOS-740HD Serial number _____

US Residence Only

Register Online
Register your KENWOOD product at www.kenwood.com/usa/

FCC

ForU.S.A

FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Supplier’s Declaration of Conformity

• Trade Name: KENWOOD
• Products: UNIVERSAL REAR VIEW CAMERA
• Model Name: CMOS-740HD
• Responsible Party: JVCKENWOOD USA CORPORATION 4001 Worsham Avenue, Long Beach, CA 90808, U.S.A. PHONE: 1-800 2S2-5722

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

For Canada
CAN ICES-3(8)/NMB-3(8)

CE
Declaration of Conformity with regard to the EMC Directive 2014/30/EU
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer:
JVCKENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-sh1, Kanagawa 221-0022, JAPAN

EU Representative:
JVCKENWOOD Europ

UK CA

Declaration of Conformity with regard to the Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091)
Declaration of Conformity with regard to the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (S.I. 2012/3032)

Manufacturer:
JVCKENWOOD Corporation
3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN

UK Importer:
JVCKENWOOD U.K. Limited
First Floor, Gleneagles. the Belfry, Colonial Way, Watford, Hertfordshire WD24 4WH, UNITED KINGDOM

Before Use/ Installation Procedure

WARNING
To prevent injury or fire, take the following precautions:

• To prevent a short circuit. never put or leave any metallic objects (such as coins or metal tools) inside the unit.
• Installation and wiring of this product require specialist skill and experience. To assure your safety, please request a specialist technician to install the unit.
• When you make a hole to install the camera, check the location of pipes, tanks and wiring and avoid touching them. Otherwise it may cause the fire.
• When you make a hole with a drill, use goggles to protect your eyes.

CAUTION
To prevent damage to the product, take the following precautions:

• Make sure to ground the unit to a negative 12V/24V DC power supply.
• When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.
• Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

NOTE

• This product is a camera that provides mirror images (left and right inverted).
• The TV can be connected to an RCA video input that is compatible with the HD camera picture quality, but please check whether the TV you use has a reverse gear activation function.
• This product is designed to supplement the driver’s rear view, but the camera images do not show all dangers and obstacles. Be sure to look behind you when reversing to confirm the view.
• This product features a wide-angle lens, so the near view is wide and the far view is narrow, which may create a false sense of distance. Be sure to look behinsj you when reversing to confirm the view.
• Do not wash your car with an automatic car wash or high-pressure water as it may result in water entering the camera or the camera falling off.
• Check camera bracket installation before driving. Are the screws loose?
  • Is the camera bracket firmly secured?
  • If the rear view camera comes loose while you are driving it may cause an accident.
• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work.
• When mounting this unit, make sure none of the leads are trapped between this unit and the surrounding metalwork or fittings.
• Do not mount this unit near the heater outlet, where it would be affected by heat, or near the doors, where rainwater might splash onto it. (Never install in locations such as the above because of the danger of malfunction due to high temperatures.)
• Before drilling any mounting holes always check behind where you want to drill the holes. Do not drill into the gas line, brake line, electrical wiring or other important parts.
• If this unit is installed in the passenger compartment, anchor it securely so it does not break free while the car is moving, and cause injury or an accident.
• If this unit is installed under a front seat, make sure it does not obstruct seat movement. Route all leads and cords carefully around the sliding mechanism so they do not get caught or pinched in the mechanism and cause a short circuit.

Care and maintenance

• When the product gets dirty, wipe dry with a silicon cloth or soft cloth. If it is seriously stained, remove stain with a cloth moistened with a neutral cleaner and then wipe the cleaner away. Do not use a hard cloth and/or a volatile substance such as lacquer thinner or alcohol, scratches, deformation, degradation and/or damage may result.
• When a lens component gets dirty, wipe gently with a soft cloth moistened with water. Do not rub with a dry cloth to prevent scratching the lens.

Installation Procedure
This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

1. To prevent a short circuit, remove the key from the ignition and disconnect the 8 battery.
2. Make the proper input and output wire connections for each unit.
3. Connect the wiring harness wires in the following order: ground, ignition and camera unit.
4. Install the unit in your car.
5. Reconnect the battery.

WARNING

• If you connect the ignition wire (Red) to the car chassis (Ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
• Do not cut out the fuse from the ignition wire (Red). The power supply must be connected to the wires via the fuse.

CAUTION

• If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die.
• If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating.
• Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.
• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.
• Install so that it does not obstruct the rear field of view.
• Install so that it does not protrude from the side of the car.
• Do not perform installation in rain or fog.
• When humidity is high, dry the surface to which the unit is to be attached before installing.
• Moisture on the attachment surface reduces adhesive strength, which may lead to the unit coming off.
• Do not attach the camera bracket to areas on the car body treated with fluorocarbon resin, or glass.
• May result in the rear view camera falling off.
  • Do not apply water to the unit.
  • Do not expose the unit to rain.
  • Do not subject the camera to unnecessary force.
  • Thoroughly clean where tape is used for sticking on the unit.
• Refer to the Instruction’s manual for details on connecting the other units, then make connections correctly.
• Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts.
• Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and seat rails.
• Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body.
• When replacing the fuse, be sure to use only fuse of the rating prescribed on the fuse holder.
• To minimize noise locate the TV antenna cable, radio antenna cable and RCA cable as far away from each other as possible.
• Lay the cords by avoiding high-temperature areas. Use corrugated tubes for wiring inside the engine room. If a cord contacts a high-temperature area of the vehicle, the coating may melt and cause short­circuiting, which may lead to a fire or electric shock hazard.

Accessories

Installation

Recommended Installation Position
Examples of correct camera installation on the rear of the vehicle

Installing the Camera/Adjusting its angle

1. Decide the camera installation position. 2 Clean the camera installation surface.

2. Using a commercially available cleaner, wipe dirt, moisture and oil away from the surface on which the camera bracket is to be attached.

3. If required, separate the camera bracket from the camera and adjust the shape according to the surface on which it will be attached.

4. Mount the camera on the camera bracket.

The camera has two securing holes at the side at the top and bottom.
Please adjust according to the installation.

5. Fix the camera temporarily with tape, etc.
   Using a piece of tape, etc., fix the camera temporarily.

Install the camera at the center of the vehicle and not to hide the number plate. And also install straight toward the forward/reverse direction of the vehicle. Be careful not to lean the camera toward other directions of the vehicle, etc.

6. Complete all of the required connections.

7. Display the camera video.
   Before viewing the camera, apply the parking brake and chock the wheels so that the vehicle will not move. Otherwise, an unexpected accident may result.
   For displaying the camera video, read the instruction manual for your video monitor. Change the shift lever to the R (Reverse) range to view the image of the rear of the vehicle.

8. Adjust the camera angle.
   When adjusting the camera angle, be careful not to stretch the camera cord.
   Adjust the angle so that the rear of the vehicle or the bumper can be seen at the bottom of the monitor.

9. After adjusting the camera angle, tighten the retaining screws firmly.
   Inspect the retaining screws at times. If they are loose, tighten them firmly.

10. Fix the camera firmly in position.
    Peel off the paper liner from the double-side adhesive tape on the camera bracket and attach it. After attaching, push the camera bracket with your finger to ensure close adhesion.
    Do not touch the adhesive surface with your hand or peel and reattach an attached tape, as these will degrade the adhesive force and may cause the camera bracket to be detached. If required, secure the bracket on the vehicle body using the camera bracket clamping screw. The camera bracket has two holes for the screw. Select one of them to fit the position of the attachment.

Using a grommet

CAUTION

• When drilling a hole in the car body to mount the camera, check the positions of fluid lines, tanks, electrical wiring, etc. to make sure there is will be interference or contact with these. Failure to do so could result in a fire, electric shock or malfunction.
• If drilling work is required, be sure to wear a pair of goggles to prevent chips and debris from entering your eyes. Otherwise, there is a risk of injuries.

1. Drill a hole of CD13 mm for the wiring.

2. Make a notch in the enclosed grommet and pass the cable connector on the camera side through it.

3. Waterproof the grommet area on the inner side of the back door with a commercially available sealant or similar .

Connections

CAUTION

• If the engine key of your vehicle does not have the ACC position, branch the wire energized when the engine key is ON and connect it to the accessory power cord.
• Before proceeding to connections, make sure that the engine key is not inserted and disconnect the (8) terminal of the battery to prevent the short-circuiting incident.
• Do not bend the camera cord to a diameter of 40 mm or a radius of 20 mm or less.

Basic Connections

Specifications

• Camera Unit

  • Lens
    Wide angle, Focal length: 1.86 mm, F value 2.0

  • Angles of view

  • Horizontal: 180°

  • Vertical: 103°

  • Waterproof and dustproof: IP67

  • Image sensor: 1 /3.8-inch color CMOS sensor Number of pixels : 1.3 Mega pixels

  • Object illuminance : 1.0 lux to 100 k lux

  • Resolution: 1280 x 720

  • Frame rate: 30 fps

  • Video Output : Wide-angle mirror image (for rearview) Output 1/F: HD-TVI

  • Operating temperature : -30 °C to +85 °C

  • Dimensions (W x H x D) : 31.1 x 23.0 x 25.2 mm 1-1/4x 7/8x 1 inch

  • Weight
    : 33.2 g (1.2 oz) (without cable)

• Power unit

  • Operating voltage: DC 12V/24V
  • Dimensions (W x H x D) : 69.2 x 23.6 x 15.5 mm 2-3/4 x 15/16 x 5/8 inch (Excluding protrusions)

• Mirror image means that the video image inverts the left and right just like the image seen on the rearview mirror or a side mirror.

• Specifications subject to change without notice.

Information on Disposal of Old Electrical and Electronic Equipment (applicable for countries that have adopted .separate waste collection systems}

Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

JVCKENWOOD Corporation
3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
© 2023 JVCKENWOOD Corporation

• This main unit is designed to mount the following cameras on the rear of the car. Refer also to the INSTRUCTION MANUAL supplied with your camera.

• CMOS-130/CMOS-230/CMOS-320/CMOS-740HD
  Esta unidad principal esta disenada para montar las slguientes camaras en la parte trasera del autom6vil. Consulte tambien el MANUAL DE INSTRUCC!ONES suministrado con su camara.

•  CMOS-130/CMOS-230/CMOS-320/CMOS-740HD

Kit Components

Installation Procedure

Attaching the Camera to the Main Unit

Before attaching the camera to the main unit, detach the original bracket from the camera using a screwdriver (not supplied).

With KENWOOD logo facing upwards/Logo KENWOOD

For CMOS-740HD/Pour CMOS-740HD

With the KENWOOD logo facing upwards/Logo KENWOOD

Do not use the camera bracket and camera bracket screws supplied with your camera

Be careful not to overtighten when attaching the camera to the main unit.

Installing to the License Plate

Install the main unit as illustrated below.

For details on the camera wiring connection and camera installation position, refer to the INSTRUCTION MANUAL supplied with your camera.

Dear Customer,
Thank you for purchasing this kenwood product. As mentioned in the pages of this booklet, our warranty fs only valid in the countries listed. If your country is not listed please contact your retailer for Information on warranty procedure, or write to:

JVCKENWOOD Customer Support Center
3- 12, Moriyacho, Kanagawa-ku, Yokohama-shi , Kanagawa 22 1 -0022, Japan

JVCKENWOOD USA Corporation

This warranty will be honored only in the U.S.A.

KENWOOD LIMITED WARRANTY FOR CAR STEREO COMPONENTS

HOW LONG IS THE WARRANTY
JVCKENWOOD USA Corporation (“KENWOOD”) warrants this product fora period of one (1) yearfromthe date of original purchase.

WHAT IS COVERED AND WHAT IS NOT COVERED
Except as specified below, this warranty covers all defects in material and workmanship in KENWOOD car stereo components. The following are not covered by the warranty:

1. Any product which is not distributed in the U.S.A. by KENWOOD or which is not purchased in the U.S.A. from an authorized KENWOOD car stereo dealer or an automobile dealer, unless the product is purchased through the U.S.A Military Exchange Service.
2. Any product on which the serial number has been defaced, modified or removed.
3. Damage, deterioration or malfunction resulting from:
   • a. Any shipment of the product (claims must be presented to the carrier).
   • b. Installation or removal of the product.
   • c. Accident, acts of nature, misuse, abuse, neglect, unauthorized product modification or failure to follow instructions supplied with the product.
   • d. Repair or attempted repair by anyone not authorized by KENWOOD.
   • e. Any other cause which does not relate to a product defect.

WHO IS PROTECTED
This warranty is enforceable only by the original purchaser.

WHAT WE WILL PAV FOR
We will pay for all labor and material expenses for covered items. Payment of shipping charges is discussed in the next section of this warranty.

HOW TO OBTAIN WARRANTY SERVICE
If your KENWOOD product ever needs service:

1. Take or ship it to any KENWOOD Authorized Service Center in the U.S.A. along with & complete description of the problem. (if you are uncertain as to whether a Service Center is authorized, please call 1-800-KENWOOD for the nearest Service Center.
   1- 800-536-9663).

2. Although you must pay any shipping charges if it is necessary to ship the product for warranty service, we will pay the return shipping charges if the repairs are covered by the warranty within the United States.

3. Whenever your units are taken or sent for warranty service, you must include a copy of the original dated sales receipt as proof of warranty coverage.

LIMITATION OF IMPLIED WARRANTIES
ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.

EXCLUSION OF DAMAGES
KENWOOD’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT AT OUR OPTION. KENWOOD SHALL NOT BE LIABLE FOR:

1. INSTALLATION OR REMOVAL CHARGES, DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN KENWOOD CAR STEREO COMPONENTS, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT; OR
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
   SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS ANO EXCLUSIONS MAY NOT APPLY TO YOU.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
If a problem develops during or after the Limited Warranty Period, or if you have any questions regarding the operation of the product, you should contact your KENWOOD Authorized Dealer or Authorized Service Center. If the problem or your question is not handled to your satisfaction, please contact our Customer Relations Department at the address listed below:

JVCKENWOOD USA Corporation
PO Box 22745 Long Beach, CA 90801 (mail) 4001 Worsham Avenue Long Beach, CA 90808 Tel: 800-536-9663
www.us.jvckenwood.com

ATTENTION
This card and receipt (or invoice) are necessary to purchase a new panel 1n case of theft or damage.

MILITARY

Units purchased through the U.S.A. military exchange service overseas may be serviced under warranty in the continental U.S.A., subject to the following conditions.

1. The original warranty is in effect
2. Proof of purchase is provided to the servicer.

WARRANTY FOR MILITARY MARKET
JVC KENWOOD corporation 1s proud of the Quality and workmanship of its audio equipment. This unit has been properly designed, tested and inspected before it was shipped to you. If properly installed and operated in accordance with instructions furnished, it should give you an optimum reliable performance.

WARRANTY PERIOD
This product is warranted for a period of (1 ) year from the date of the original purchase

SCOPE OF WARRANTY
Except as specified befow, th1s warranty covers all defects in rnaleriatsand workmanship of the KENWOOD brand products.
During lhe warranty period, any authorized KENWOOD Service Center in the military market listed in the back of this warranty card will provide you free-of-charge both parts and labor required to correct any defect in materials or workmanship.

The following are not covered by this warranty.

1. Voltage conversions.
2. Periodic check-ups which do not disclose any defect covered by the warranty
3. Cabinets, grilles, other exterior finishes, belts, tape heads, and other non-durable parts and accessories.
4. Units on which the serial number has been effaced, modified or removed.
5. Installation and/or removal charges.
6. Damaged magnetic tapes.
7. House call charges for any repairs
8. Shipping or delivery charges to or from an authorized KENWOOD Service Center.
9. This warranty will not cover any failure that is due to any ol the following conditions in accordance with the visual inspection of the authorized KENWOOD Service Center:
   • Improper maintenance or repair, including the installation of parts or accessories that do not conform to the quality and specifications of the original parts.
   • Misuse, abuse, neglect, unauthorized product modilication or failure lo follow instructions contained in the Owner’s Manual.
   • Accidental or intenlional damages.
   • Repairs or attempted repairs byan unauthorized agency. (All repairs must be performed at an authorized KENWOOD Service Center.)
   • Damages or deteriorations caused during shipment (Claims must be presented to the carrier).
   • Damages or deteriorations resulting from removal and/or replacement.

PURCHASER’S RESPONSIBILITIES
As the purchased of a new KENWOOD brand product, you are requested to do the following in order to obtain KENWOOD warranty service.

1. Retain your sales slip or other evidence of purchase for proving your eligibility for requesting KENWOOD warranty service.
2. Make your unit available to an authorized KENWOOD Service Center in the military market for inspection and approved warranty service, or ship your unit in its original carton box or equivalent fully insured and shipping charges prepaid, to the authorized KENWOOD Service Center.

LIMITATION OF IMPLIED WARRANTIES
Any and all implied warranties, including warranties of merchantability and fitness for a particular purpose, shall be limited in duration to the length of this warranty

EXCLUSION OF CERTAIN DAMAGES
KENWOOD’s liability for any detective product is llmited to the repair or replacement of said product, al our potion. and shall not include damages of any kind, whether incidental, consequential or otherwise, expect to the extent prohibited by applicable law.

ATTENTION
This card and receipt (or invoice) are necessary to purchase a new panel in case of theft or damage.

KENWOOD AUTHORIZED SERVICE CENTERS IN MILITARY MARKET

JAPAN:

• Yokota
  KENWOOD Rep,; c/o
  Yokota BX, JAAX AAFES-PAC,
  APO San Francisco 96328

• Zama
  KENWOOD Rep,; c/o
  lama PX, JAAX AAFES-PAC,
  APO San Francisco 96343

• Misawa
  KENWOOD Rep,; c/o
  Misawa BX, JAAX AAFES-PAC,
  APO San Francisco 96519

• Yokosuka
  KENWOOD Rep,; c/o
  A-33, Yokosuka NEX No. 260-010
  FPO Seattle 98760

• Atsugi
  KENWOOD Rep,; c/o
  Atsugi NEX No. 260-020 FPO Seattle 98767

• lwakuni
  KENWOOD Rep,; c/o
  Marine Corps Exchange, Marine Corps Ai r Station,
  FPO Seattle 98764

• Sasebo
  Sasebo NEX;
  Navy Exchange 260-040
  F.A. Box 115 FPO Seattle 98766

• Okinawa
  KENWOOD Rep,; c/o
  OWAX, AAFES-PAC, APO San Francisco 96230

• KOREA:
  KENWOOD Rep,; c/o
  KOAX Repair Shop, AAFES-PAC
  DD-Camp Market, APO San Francisco 96488

• GUAM:
  KENWOOD Rep,; c/o
  Guam NEX No. 230-010,
  FPO San Francisco 96630
  KENWOOD Rep,; c/<-
  GUAX, AAFES-PAC, APO San Francisco 96334

• U.S.A.:
  In The Continental U.S.A.
  For Nearest Authorized Service Center;
  Tel: 1 -800-536-9663
  www.us.jvckenwood.com

• EUROPE:
  Please inquire at the military resale outlets where you bought your KENWOOD products, or
  JVCKENWOOD DEUTSCHLAND GMBH:
  Konrad-Adenauer Allee 1 -11, 61 118 Bad Vilbel, Germany

JVCKENWOOD Canada Inc

KENWOOD WARRANTY
JVCKENWOOD Canada Inc. (hereinafter called “KENWOOD”), gives the following written warranty to the original customer of each new KENWOOD product distributed In Canada by KENWOOD and purchased from a dealer authorized by KENWOOD.
KENWOOD warrants that each new KENWOOD product, under normal use, is free from any defects, subject to the terms and conditions set forth below. If a defect should occur within the warranty period, repairs will be made free of charge for parts and labour when such defects are determined by KENWOOD or its’ authorized service centres to be attributable to faulty materials or workmanship at time of manufacture. Please contact KENWOOD to confirm if a dealer or service centre is authorized by KENWOOD.

WARRANTY PERIOD
This KENWOOD product is warranted for parts and labour for a period of one (1) year from the date of original purchase, lease or rental, except for products which are used in a professional or commercial application, which are warranted for a period of ninety (90) days for parts and labour and are subject to the terms and conditions of the warranty.

WARRANTY EXCLUSIONS
This warranty excludes:

• (a) Products purchased in a foreign country or purchased in Canada and taken to a foreign country.
• (b) Products purchased from a dealer not authorized by KENWOOD.
• (c) Products with the serial number defaced, altered or missing.
• (d) Periodic check-ups which do not disclose any defects covered by this warranty.
• (e) Defects resulting from disaster, accident, abuse, misuse, lightning, power surges, neglect or lack of periodic maintenance, unauthorized modification or failure to follow instructions in the owner’s manual.
• (f} Defects or damage as a result of repairs performed by a person or party not authorized by KENWOOD.
• (g) Defects resulting from the use of parts or devices that do not conform to KENWOOD specifications.
• (h) Damage or deterioration occurring to any exterior finishes, cosmetic parts, tape heads, adaptors, antennas, cables, tapes, discs or faults or damage caused by defective or leaking batteries.
• (I) Defects or damage occurring during shipping (claims should be presented to the shipping company).
• (j) Product voltage and /or line frequency conversions.
• (k) Product installation or removal charges.

TO OBTAIN WARRANTY SERVICE
Should your KENWOOD product require warranty service, deliver it to any authorized KENWOOD service centre and present the original copy of your bill of sale and this warranty card as proof of warranty, or send your product fully insured and freight prepaid to the nearest authorized KENWOOD service centre. To avoid possible shipping damage, make sure the product is properly packed. Include a copy of your original bill of sale and this warranty card as proof of warranty along with your name, home and /or work telephone number(s), a complete return address and a detailed description.of the fault(s). Products repaired within warranty will be returned freight prepaid to destinations within Canada. The customer is responsible for all freight and related costs for the return of product(s) to destinations outside Canada.

ENTIRE WARRANTY
This warranty constitutes the entire written warranty given by KENWOOD. No person, party, dealer or service centre or their agents or employees are authorized to extend or enlarge this warranty on behalf of KENWOOD by any written or verbal statement or advertisement or promotion, including any extended warranty program or plan that may be offered by the dealer or service centre, unless approved in writing by KENWOOD.

DISCLAIMER
KENWOOD disclaims any responsibility for loss of time or use of the product or any other indirect, incidental or consequential damage to other products or goods, inconvenience or commercial loss.

NOTICE TO CONSUMER
The provisions contained in this written warranty are not Intended to limit, modify, take away, disclaim or exclude any warranties or rights you may have which are set forth in any applicable provincial or federal laws or legislation.

IMPORTANT
This warranty card by itself is not considered by KENWOOD as a valid proof of purchase. When applying for warranty repairs, you must present the original copy of your bill of sale and this warranty card as proof of warranty, so we recommend that they be kept in a safe place, should they be required in the future.

JVCKENWOOD Canada Inc.
6685 Millcreek Drive, Unit 8, Mississauga, Ontario, L5N 5M5, Canada
Tel.: 905-670-7211
Fax: 1905) 670-7248
E-mail: customerservice@ca.jvckenwood.com
Product Registration: https://myjvckenwood.ca

ATTENTION
This card and receipt (or invoice) are necessary to purchase a new panel in case of theft or damage

References

• Kenwood Customer Support | Car Entertainment & Amateur Radios
• KENWOOD USA
• Homepage • KENWOOD Deutschland
• Inicio • Kenwood
• Homepage • KENWOOD Nederland
• JVCKENWOOD USA Corporation
• Warranty Registration - JVCKENWOOD Canada Inc
• Warranty Registration - JVCKENWOOD Canada Inc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>