KITSOUND Immerse Active Wireless Earphones User Manual

KITSOUND Immerse Active Wireless Earphones User Manual

ASSEMBLE INSTRUCTION

Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods. For your own safety, please be aware of your surroundings when using these earphones. Not suitable for children.

Your product and batteries must be recycled or disposed of properly. Please contact your local recycling centre
for more information on proper disposal.

All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their
use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. Please recycle this packaging responsibly

JB. 5329-b / Made in China. © KitSound is a trademark of Kondor Limited, 2017. Christchurch, Dorset, BH23 4FL, UK

Please read this manual carefully before use.

• Box contents
• KS Immerse Active Wireless Earphones
• Magnetic USB charge cable
• S/M/L earbuds
• User manual

Functions

1. Volume–/Previous track
2. LED indicator
3. Multi-function button (MFB)
4. ANC switch
5. Volume+/Next track
6. Microphone
7. Magnetic charger contact
8. Magnetic USB charger
9. Charging LED indicator

Instructions for use

Charging the battery

1. Connect the Magnetic charger contact (7) to the Magnetic USB charger (8)
2. Connect the other end of the Magnetic USB charger (8) to a PC USB port or USB mains charger
3. The Charging LED indicator (9) will be red whilst charging, and the LED will turn off when battery is full
   Note: The first charge may take up to 3 hours to complete.

Battery information

• A rechargeable battery powers your device. Unplug the charger from the electrical plug and the device when not in use

• If left unused, a fully charged battery will lose its charge over time. We recommend a full charge twice a month to ensure battery integrity

• Please do not leave the device in hot or cold places, such as in a closed car in summer or winter
  conditions, as it will reduce the capacity and lifetime of the battery

• Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged

Pairing a wireless device

1. Hold the MFB (3) down for 3 seconds. You will see the LED indicator (2) rapidly flash blue and then enter pairing mode
2. Turn on your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
3. Select ‘KS Immerse Active’ from the list of found devices. If asked for a passcode, enter ‘0000’ or ‘1234’ and the earphones will then be connected to your device
4. After pairing successfully, the LED indicator (2) will slowly flash blue; you can then answer the phone or listen to your music
5. The next time you switch the earphones on, they will automatically search for and attempt to connect to the last paired device

Note: ‘Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is in no way affiliated with or endorsed by Bluetooth SIG Inc.

view

Re-pairing or pairing new devices

1. Make sure you have turned off the wireless connectivity on any previously paired devices
2. Follow the ‘Pairing a wireless device’ instructions from step 1

Functionality

(3) (not supported by all devices)
Volume+| Press and hold the Volume+/Next track (5) to increase volume
Volume–| Press and hold the Volume–/Previous track (1) to decrease volume
Previous track| Press and immediately release the Volume–/Previous track (1) twice
Next track| Press and immediately release the Volume+/Next track (5) twice
Play/Pause| Press the MFB (3) down and immediately release

sing Active Noise Cancelling
Push the ANC switch (4) to activate, and the LED indicator (2) will turn white.
Warning: We do notrecommend that this product is used driving or walking as it will
prevent you from hearing warnings that could be a danger to you or others.

Note:   Active Noise Cancelling will not work when battery has drained.

Care for your Immerse Active
Please DON’T:

• Get the Immerse Active wet
• Drop the Immerse Active as this will invalidate your warranty
• Open up the Immerse Active. There are no user serviceable parts inside
• Expose the Immerse Active to extreme temperatures or rapid changes of hot to cold or vice versa
• Charge the Immerse Active if the headset/remote has got wet

Please DO:

• Clean the Immerse Active with a soft dry cloth and no detergents

Specifications

Works with Bluetooth® V4.1

Wireless connectivity distance| up to 10 m
Frequency response| 20 – 20 kHz
Talk time| up to 5 hours
Play time| up to 5 hours
Charge time| up to 1.5 hours
Standby time| up to 3 months
Battery type| LiPo
Battery capacity| 80 mAh

Troubleshooting

• If you cannot connect the earphones to your device, please try the following:
  • Ensure that the earphones are charged, switched on, paired with and connected to your device.
  • Check the earphones are within 10 metres (30 feet) of your device and that there are no obstructions (such as walls or other electronic devices) between the earphones and the device.
  • The earphones can only pair to one device at a time, so please ensure there are no conflicting wireless devices trying to connect to the earphones
• If the earphones will not switch off, you can reset them back to normal by putting them on charge
• If you receive an intermittent signal, please ensure the earphones are fully charged before continuing use
• If you do not use the earphones for longer than 3 minutes whilst not connected to a device, they will
  automatically power off to conserve power

We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to contact us at: [email protected]

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>