levoit Elana Himalayan Salt Lamp User Manual
- June 16, 2024
- Levoit
Table of Contents
levoit Elana Himalayan Salt Lamp
Thank you
Thank you for purchasing your Natural Himalayan Salt Lamp by Levoit. At Levoit, we believe your living space plays a key role in developing a happier and healthier lifestyle. Himalayan Salt Lamps create a soothing environment by emitting warm lighting and releasing negative ions into the air. Along with their holistic benefits, a Levoit Himalayan Salt Lamp adds style and an artisanal touch to your home. Levoit Himalayan Salt Lamps are the highest quality on the market and we are proud to offer unique and inspiring designs.
IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage the product.
Safety Use & Care
- Keep out of reach of children.
- The lamp is for indoor use only. Avoid exposure to high-temperature sources direct sunlight and moisture.
- DO NOT strike or drop the lamp.
- To avoid damage, move and handle with care.
- DO NOT wash with water or detergents. Do not immerse in any form of liquid.
- DO NOT place the salt lamp near any electrical appliances. The natural evaporation may cause humidity or damage to other appliances.
- Due to the nature of natural salt, each crystal varies in color, shape, size, and weight.
- To protect the surface in which the lamp is placed, place a cloth or coaster under the lamp’s base.
- If the salt crystal surface becomes moist, set the lamp to high and leave the lamp on to allow the salt crystal to dry.
- DO NOT replace the bulb while the salt crystal is damp.
Features & Specifications
Input: | AC 120V/60Hz |
---|---|
Light Color: | Orange |
Power: | Max15W |
Length of Power Cord: | 2m |
NOTE:
- Recommended for a room size of equal to or larger than 32 square feet (3 square meters).
- Due to the nature of natural salt, each crystal varies in color, shape, size, and weight.
Function Diagram
- Salt crystal
- Base
- Base screws
- Lamp holder
- Bulb
- Power cord
- Lighting control
NOTE: Each salt crystal is unique in shape and size.
Cleaning & Maintenance
- Regularly dust off the salt crystal with a dry clean cloth.
- Do not wash or clean with water or liquid detergents.
- If not in use for a long period of time, store the lamp in a cool and dry environment, covering the crystal with a plastic bag.
- The lamp may naturally moisten in humid environments. If used in a humid environment, keep the lamp lit for several hours for it to naturally dry out.
- If the salt crystal becomes moist, gently pat down the crystal surface with a dry cleaning cloth.
Package Contents
1 x Himalayan Salt Lamp
3 x 15 Watt Bulb (one pre-installed)
1 x User Manual
Operation
- Place the salt lamp on a hard, flat surface.
- Plug the power cord into a powered socket.
- Tap the lighting control button to turn on the lamp.
- Tap and hold the lighting control button to adjust the lamp brightness. Release at the desired brightness setting.
- Tap the power button once again to turn off the lamp
Action | Command |
---|---|
Tap on | Tap once |
Dim Light | Tap and hold, then release at desired level (while light is on) |
Brighten Light | Tap and hold, then release at desired level (while light is |
dim)
Turn off| Tap once
Light Bulb Replacement
NOTE: It is best to complete this process seated at a table or nearby surface to place the small screws.
-
Unplug the salt lamp’s power cord.
-
Carefully flip over the lamp, supporting the lamp by the crystal.
-
With a small screwdriver, remove the two base screws, rotating counter-clockwise.
NOTE: Do not remove the center screw. -
Gently slide off the lamp holder while holding the lamp(upside-down or sideways).
-
Carefully set aside the salt crystal on a flat and stable surface and remove the bulb from the base socket, gently rotating it counter-clockwise.
-
Install a new bulb, gently rotating it clockwise.
-
Gently slide the lamp holder back onto the crystal, make sure the screw slots and screw holes are aligned.
-
With a small screwdriver, reinstall the screws in each of the two outer slots, making sure they are tightly screwed in.
-
Place the lamp on a flat surface right side up, holding your hand under the base until placed under the table so as to avoid the possibility of losing any loose screws.
1- Year Limited Warranty
Terms & Policy
Levolt warrants all products to be of the highest quality in material,
craftsmanship and service for a minimum of 1 year, effective from the date of
purchase. Warranty lengths may vary between product categories. For specific
warranty terms, please refer to your product listing page or product operation
manual.
Under the limited warranty, Levoit will replace or refund any parts found to be defective due to manufacturer flaws. This warranty extends only to personal use and does not extend to any product that has been used for commercial use, rental use, or any other use in which the product is not intended for. There are no warranties other than that expressly set forth with each product.
This warranty is non-transferrable. Levoit is not responsible in any way for any damages, losses or inconveniences caused by equipment failure or by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual.
Levoit and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed above and within the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
Should your product prove defective within the specified warranty period,
simply return the defective part or unit in its original packaging with the
following:
(1) An original copy of invoice, (2) Order confirmation
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Exceptions & Exclusions
- Damage due to abuse, accident, alteration, misuse, tampering or vandalism.
- Improper or inadequate maintenance.
- Damage in return transit.
- Unsupervised use by children under 18 years of age.
To register your warranty or to make a claim, please contact our helpful customer support team at 888-726-8520 or email support@levoit.com
- Please hove your order ID number ready before contacting customer support.
Customer Support
Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team.
We’re here for you.
Levoit Corporation
1202 N Miller Street, Suite A
Anaheim, CA 92806
Toll-Free: 888-726-8520
Email: support@levoit.com
Support Hours
Monday – Friday: 9:00am – 5:00pm PST
*Please have your order ID number ready before contacting customer support.
Questions or Concerns?
Please contact us Mon – Fri 9:00AM – 5:00PM PST
at 888-726-8520 or email
support@levoit.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>