ANJANK AC209 Bluetooth Speaker User Manual

AC209 Bluetooth Speaker

Specifications

• Power Specifications:
  • AC, 100-240V, 50-60Hz, 0.2A
  • DC, 5V-1A, 24W, Class 2

Package Include

• White Noise Machine
• Adapter with cord
• CR2032 button cell
• User Manual

Product Features

• 12/24H Mode
• Display Dimmer
• Alarm Indicator
• Bluetooth Speaker Indicator
• Light Dimmer
• Alarm Setting
• Time Set
• Volume Up
• Sleep Timer
• Volume Down
• Music Play/Pause
• Bluetooth Speaker
• Previous Track/Next Track
• Night Light
• Snooze/Light Color Switch
• 20 Soothing Sounds
• 30-level Volume Control
• 8 Ringtones
• 7-Color Night Light
• 0-100% Display Dimmer
• 0-100% Night Light Dimmer
• 12/24H Mode
• 9 Minutes Snooze
• Battery Backup (Only memory function)

Getting Started

1. Plug the adapter into a standard household outlet. The display will show “88:88” and the machine is ready to be set.
2. Pull out the insulator sheet before use to activate the backup
   battery, which preserves the time and alarm settings in case of power outage.

NOTICE

• If the display is blank after plugging in, check whether the Display Dimmer on the back is at a high position.
• The clock is not battery-powered. The battery only preserves time and alarm settings. The screen will go blank if only using the battery. Please keep it plugged in.

Sound Selection

1. Press the sound mode button to switch on/off the sound mode.
2. Press the previous or next button to switch among the available 20 sounds.

List of Tracks

Wireless Speaker Pairing

1. Long press the Bluetooth button to turn on/off the wireless speaker. The icon will blink for pairing.
2. Enable Bluetooth on your phone and select “AC209” from the available/paired list. After successful pairing, the icon will light up.
3. Press the or button to play the previous or next track, or press the play/pause button to pause it.
4. Press the or button, or use your phone to adjust the speaker volume.

NOTICE:

• When the wireless speaker turns on, the AC209 will automatically connect to the last phone if available. If not, AC209 will enter pairing mode.
• Long press the Bluetooth button to exit the current Bluetooth device connection and enter pairing mode again. The icon will blink.
• Place your speaker and phone no more than 15 meters (49ft) away from each other.

Auto Time Setting

Under Bluetooth connection, the clock will automatically sync time according to your phone. To change the hour format, press the hour format button.

NOTICE:

Due to protocol restrictions, some phones may not support auto-setting. If the clock cannot auto-correct time, please set the time manually.

Manual Time Setting

1. Press the hour setting button. Press the previous or next button to set the hour.
2. Press the minute setting button. Press the previous or next button to set the minute.
3. Press the 12/24 hour mode setting button. Press the previous or next button to select.
4. Press the finish time setting button to confirm.

NOTE:

When the wireless speaker is on, time cannot be set manually. You can only switch between the 12/24 hour format using the hour format button.

Alarm On / Off

Long press the alarm button to turn on/off the Alarm. If the alarm icon on the display disappears, this alarm will NOT go off the next day.

Alarm And Ringtone Setting

1. Press the “ ” button to enter the HOUR setting. Press the” ” “ ” button to set the hour.
2. Press the ” ” button to confirm and enter the MINUTE setting. Press “ ” or “ ” button to set the minute.
3. Press the ” ” button to confirm and enter the RINGTONE setting. Numbers P01-P08 will be shown on the display and the sound will be played accordingly to indicate the alarm ringtone ( P01-Beep, PO2-Piano, P03-Bird Chirp, P04-Sea Wave, P05-Stream, P06-Music Box, P07-Yoga Music, P08-Meditation Music). Press ” ” or “ ” button to select your preferred ringtone. Press” ” or ” ” button to select your preferred ringtone volume.
   NOTICE:
   The alarm continues to ring for 1 hour with the icon flashing and the light on for 1 hour. After 1 hour the alarm and light turn off, the alarm icon stays on and the alarm will not ring again that day.

Alarm Pause / Snooze

When the alarm goes off, you have two options:

1. Press any button except SNOOZE button to stop the alarm when it’s ringing. Alarm will go off next day.
2. Press SNOOZE button to snooze, ” ” icon will blink on the display. The alarm will go off again 9 mins later. If you want to cancel snooze, press “ “, and the alarm 1 will not go off today.

Night Light Setting

1. Press the ” ” button to turn on/off the night light.
2. Press the “SNOOZE ” button to select which color of the night light you like.

Dimmer Control of Screen Display&Night Light

The “Display Dimmer” dial and the “Light Dimmer” dial are at the back of the machine, and the adjustable brightness range is from 0 to 100%.

Sleep Timer Setting

1. When the machine is on, press the ” ” button repeatedly to select a sleep timer ranging from 1H, 2H, 3H, 4H, OFF. The led light of the selected timer will light on accordingly. If no operation is performed within 5S, the machine will return to the time display and start the timer automatically.
2. Press the “ ” button to select the timing duration as OFF to turn off the timer.
3. When in sleep timer mode, press the “ ” key to check the remaining time. Press the “ ” key again to reset the timer.
   NOTE: When the music is playing, the volume of the music gradually decreases until it turns off 1 minute before the off time; when the light is on, the brightness of the light gradually decreases until it turns off 1 minute before the off time.

Support
If you have any issues with this clock, please contact us at customer@kerweilai.com. We will address your issue within 24 hours.

FAQ

Q: What should I do if I find a faulty product during setup ?

A: Please email us at customer@kerweilai.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>