ANJANK AC201 White Noise Machine with Alarm Clock User Manual

ANJANK AC201 White Noise Machine with Alarm Clock

Product Information

Specifications

• Power Specifications:
  • AC, 100-240V, 50-60Hz, 0.7A
  • DC, 12V-2A, 24W, Class 2
• Package Include: Not specified
• Features:
  • Front View:
  • Radio Indicator
  • AM/PM Appear in 12H Mode
  • Time
  • Alarm 1 Indicator
  • Alarm 2 Indicator
  • Wireless Speaker Indicator
  • Top View:
  • Wireless Charging
  • Back View:
  • Volume Control
  • DC 12V
  • Battery Backup (1 CR2032 button cell is included)
  • Bluetooth Speaker
  • Dimmer Control
  • Previous Track/ +
  • Volume Control Volume Control
  • Next Track/ –
  • Time Set
  • FM Radio
  • Alarm 1 Setting
  • Sleep Timer
  • Alarm 2 Setting
  • Music Play/Pause
  • Bottom View:
  • Snooze
  • DC 12V-2A
  • Snooze
  • Dimmer Control

Product Usage Instructions

Getting Started

1. Plug the adapter into a standard household outlet. The display will show 12:00, indicating that the clock is ready to be set.
2. Check if the CR2032 button cell (included) is in place. The backup battery preserves the time and alarm settings in case of a power outage.
   • NOTICE:
   1. If the display is blank after plugging in, check if the Display Dimmer on the back is at the high position.
   2. The clock is not battery-powered. The battery only preserves time and alarm settings. The screen will go blank if only the battery is used. Please keep it plugged in.

Wireless Speaker Pairing

1. Press the button to turn on/off the wireless speaker. When the wireless speaker turns on, the icon will blink for pairing.
2. Enable Bluetooth on your phone and select “AC201” from its available/paired list. After successful pairing, the icon will light on.
   • NOTICE: When the wireless speaker turns on, the AC201 will blink

Auto Time Setting

Under Bluetooth connection, the clock will automatically sync the time according to your phone. To change the hour format, press the button.

• NOTICE: Due to the MAP/HFP protocol restriction, some phones may not support auto-setting. If the clock cannot autocorrect the time, please set it manually.

Manual Time Setting

1. Press the button to set the HOUR setting. Press the or button to set the hour.
2. Press the button to confirm and enter the MINUTE setting. Press the or button to set the minute.
   • Blink
3. Press the button to confirm and enter the 12/24 hour mode setting. Press the or button to select.
   • Blink
   • Blink
4. Press the button to finish time setting. NOTE: When the wireless speaker is on, time cannot be set manually. Only press the button to switch between 12/24 hour format.

Alarm And Ringtone Setting

1. Take the example of setting Alarm 1. Press the button to enter ALARM HOUR setting. Press the or button to set the hour.
   • Blink
2. Press the button to confirm and enter MINUTE setting. Press the or button to set the minute.
   • Blink
3. Press the button to confirm and enter RINGTONE setting. A number will be shown on the display, and the corresponding sound will be played to indicate the alarm ringtone (#01 is Beep, #02 is FM Radio). Press the or button to select your preferred ringtone.

FAQ

1. If a faulty product is found during setup, how can I contact customer support?
   • If you find a faulty product during setup, please email us at [email protected].

If a faulty product is found when setting up please email us at [email protected].

Power Specifications

• AC, 100-240V, 50-60Hz, 0.7A
• DC, 12V-2A, 24W, Class 2

Package Include

• 1*Bluetooth alarm clock
• 1*Adapter with cord
• 1*CR2032 button cell
• 1*User Manual

Features

• FM Radio
• 12/24H Mode
• Auto Set Time
• 9 Minutes Snooze
• Sleep Timer
• 0-100% Dimmer
• Wireless Speaker
• Wireless Charging
• Dual Alarm Clock
• Battery Backup (Only memory function)

Front View

Top View

Back View

Bottom View

Getting Started

1. Plug the adapter into a standard household outlet, you will see 12:00 on the display and the clock is ready to be set.
2. Check out whether the CR2032 button cell (included) is at place. Backup battery is to preserve the time and alarm settings in case of power outage.

NOTICE:

1. If the display is “blank” after plugging in, please check whether the “Display Dimmer” on the back is at the high position.
2. It is NOT a battery-powered alarm clock. The battery just preserves time and alarm settings in case of power outage. The screen will go blank if only use battery.
   Please keep plugged in.

Dimmer Control

The “Display Dimmer” dial is at the back of the clock, and the adjustable brightness range is from 0 to 100%.

Wireless Speaker Pairing

1. Press “BT” button to turn on/off the wireless speaker. When the wireless speaker turns on, “BT” icon will blink for pairing.
2. Enable your phone bluetooth and select “AC201” from its available/paired list. After pairing successfully, “BT” will light on.
3. Press “ ” or “ ” button to play the previous track or next track, or press “ ” button to pause it.
4. Slide the “Volume Control” dial or use your phone to adjust the speaker volume.

NOTICE:

1. When wireless speaker turns on, the “AC201” will automatically connect to the last phone if available.
   If not, “AC201” will enter pairing mode.

2. Long press “BT” button to exit the current Bluetooth device connection and enter paring mode again,“BT” icon will blink.

3. When radio is on, press “BT” button, radio will turn off. And the “AC201” will automatically connect to the last phone, but the music will not play automatically, you need to press “ ” button or use your phone to start.

4. Not available as the phone function.

5. Place your speaker and phone no more than 10 meters (33ft) away from each other.

Auto Time Setting

Under Bluetooth connection, the clock will auto-sync time according to your phone. If you want change hour format,press the “ ” button.

NOTICE:
Because of the MAP/HFP protocol restriction, some phones did not support the auto-setting. If the clock cannot autocorrect time, please set time manually.

Manual Time Setting

1. Press the “ ” button to set HOUR setting.
   Press “ ” or “ ” button to set hour.

2. Press the “ ” button to confirm and enter MINUTE setting. Press “ ” or “ ”button to set minute.

3. Press the “ ” button to confirm and enter 12/24 hour mode setting. Press “ ” or “ ” button to select.

4. Press the “ ” button to finish time setting.

NOTE:
When the wireless speaker is on, time cannot be set manually, only can press the “ ” button to switch 12/24 hour format.

Alarm And Ringtone Setting

1. Take the example of setting Alarm 1. Press the “ ” button to enter ALARM HOUR setting. Press “ ” or “ ” button to set hour.
2. Press the “ ” button to confirm and enter MINUTE setting. Press “ ” or “ ” button to set minute.
3. Press the “ ” button to confirm and enter RINGTONE setting. A number will be shown on the display and sound will be played accordingly to indicate the alarm ringtone ( # 01 is Beep, #02 is FM Radio). Press “ ” or “ ” button to select your preferred ringtone.
4. Press the “ ” button to finish alarm setting. The Alarm 2 also works in the same way.
   NOTICE: “ ” button only works on alarm 1 setting, not alarm 2. So do “ ”.

Alarm Pause / Snooze

When the alarm goes off, you have two options:

1. Press any button except SNOOZE button to stop the alarm when it’s ringing. Alarm will go off next day.
2. Press SNOOZE button to snooze, “ ” icon will blink on the display. The alarm will go off again 9 mins later.
   If you want to cancel snooze, press “ ”, and the alarm 1 will not go off today.

NOTICE:

1. The SNOOZE button is at the bottom of clock, press the clock top to get snooze.
2. Beep alarm (#01 ringtone) will last 5 minutes; FM radio alarm (#02 ringtone) will sound for 1 hour.
3. The alarm ringtone will start off quiet and gradually get louder for the first 30s.
4. The beep alarm (#01 ringtone) volume is default, can not be adjusted. You can adjust the FM radio alarm (#02 ringtone) volume by rolling the “Volume Control” dial when setting alarm.

Alarm On / Off

Long press the “ ” button to turn on or off the Alarm

1. If “ ” icon on the display disappears, this alarm will NOT go off next day. The Alarm 2 also works in the same way.

Manual-Scan Radio Station

1. Press “ ” button to turn radio mode on or off.
2. When the radio is on, press “ ” or “ ” button to select channel.

Auto-scan Radio Station

When the radio is on, long press “ ” button, FM radio will scan and auto-store the scanned stations. Then press “ ” or “ ” button to select your favorite channel.

Radio Alarm Setting

When the radio is on, you can select the channel you want,and long press “ ” button until the letter “AL1” blinks on the display. It means this channel is saved as the second alarm ringtone for Alarm 1.

Sleep Timer Setting

When the radio or wireless speaker turns on, you can press the “ ” button repeatedly to select the sleep time ranging from OFF, 10, 20, 30, 40 to 120 minutes.

Wireless Charging

The round area of clock top is wireless charging
sensor. Place your phone in the center, the phone will light up if charging successfully.

Note:

1. Remove any protective cases containing magnet, metal, or materials thicker than 0.12″ (3mm)
2. Compatible with wireless charging enabled devices:
   iPhone14/14Pro/14Pro Max/14 mini/13/13 Pro/13 Pro Max/13 mini/12/12 Pro/12 Pro Max/12 mini/11/ 11 Pro/11 Pro Max/XS Max/XS/XR/X/8/8 Plus; Samsung Galaxy Note 9/Note8/S8/S8 Plus/S7/S7 Edge/S6 Edge Plus/S9/S10/S10 Plus/S10E/S20/S21/S22/S23; Google Pixel 7/7Pro/6/5/4/4XL/3/3XL, Nexus 4/5/6/7; LG V50/V40/V35/V30; LG G8/G7/G6. And other devices with wireless charging function.

Support
If you have any issue with this clock, please contact us at [email protected].

We will address your issue within 24 hours.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user°Øs authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.®C Increase the separation between the equipment and receiver.®C Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.®C Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>