PHILIPS LFC7530 AmpLight Battery Group Cabinet Control Owner’s Manual
- June 16, 2024
- Philips
Table of Contents
PHILIPS LFC7530 AmpLight Battery Group Cabinet Control
Product Information
- Specifications
- Product Name: LFC7530 AmpLight Battery
- Full Product Name: LFC7530 AmpLight Battery
- Full Product Code: 872790094762500
- Order Code: 913700341303
- Material Nr. (12NC): 913700341303
- Numerator – Quantity Per Pack: 1
- EAN/UPC – Product/Case Numerator: 8727900947625
- Packs per Outer Box: 60
- EAN/UPC – Case: 8727900947632
Dimensional
Dimensions:
- Length: 35 mm (1.38 in)
- Width: 58 mm (2.28 in)
- Height: 86 mm (3.39 in)
Product Usage Instructions
- Step 1: Unboxing and Setup
- Open the package and remove the LFC7530 AmpLight Battery.
- Inspect the battery for any visible damage or defects.
- If everything looks good, proceed to the next step.
- Step 2: Charging the Battery
- Connect the provided charging cable to the battery’s charging port.
- Plug the other end of the charging cable into a power source.
- The battery LED indicator will start blinking to indicate that it is charging.
- Wait until the LED indicator stops blinking, which means the battery is fully charged.
- Step 3: Installing the Battery
- Locate the device or fixture where you want to install the LFC7530 AmpLight Battery.
- Open the battery compartment or access panel on the device.
- Insert the battery into the compartment, ensuring proper alignment of the connectors.
- Close the battery compartment or access panel securely.
- Step 4: Operating the Battery
- To turn on the battery, locate the power button on the device or use any included remote control.
- Press the power button or use the remote control to activate the LFC7530 AmpLight Battery.
- The device or fixture should now be powered by the battery.
- Frequently Asked Questions (FAQ)
- Q: How long does it take to fully charge the LFC7530 AmpLight Battery?
- A: The charging time may vary, but on average, it takes approximately 2-3 hours to fully charge the battery.
- Q: Can I use the LFC7530 AmpLight Battery with any device or fixture?
- A: The LFC7530 AmpLight Battery is designed to be compatible with a wide range of devices and fixtures. However, it is recommended to check the device’s specifications or consult the manufacturer to ensure compatibility.
- Q: How long does the battery last on a single charge?
- A: The battery life depends on various factors such as the power consumption of the connected device and the battery capacity. On average, the LFC7530 AmpLight Battery can provide power for up to 8 hours on a single charge.
AmpLight Battery
LFC7530 AmpLight Battery
- Philips Group Cabinet Control enables remote grouping, monitoring, and controlling of diverse outdoor luminaires.
- Customers can control their lighting installations, through a retrofitted modular cabinet solution at the electrical cabinet.
- Supports optimized energy consumption and manages KPIs better.
- The solution autonomously executes complex tasks based on the configurations.
- The Controller can automatically switch between different available communications carriers to provide stable and reliable communications to Interact application(s).
Warnings and Safety
- Refer to the Documentation portal for all technical documents (https://www.partner.portal.signify.com/)
- Check the local LTE band applicable before placing an order for the controller
- No UL certification in Gen3 controller and modules
- Update forecast for Gen3 in Koolog tool to ensure on-time delivery for projects
Product data
Product Data|
---|---
Order product name| LFC7530 AmpLight Battery
Full product name| LFC7530 AmpLight Battery
Full product code| 872790094762500
Order code| 913700341303
Material Nr. (12NC)| 913700341303
Numerator – Quantity Per Pack| 1
---|---
EAN/UPC – Product/Case| 8727900947625
Numerator – Packs per outer box| 60
EAN/UPC – Case| 8727900947632
Group Cabinet Control
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
- www.lighting.philips.com.
- 2024, January 9 – data subject to change
- Datasheet, 2024, January 9 data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>