igloohome Nordic Lock Installation Guide
- June 16, 2024
- igloohome
Table of Contents
igloohome Nordic Lock
EUROPEAN LOCK INSTALLATION
-
Ensure your cylinder is a Euro profile cylinder.
-
Ensure that the distance from the cylinder to the edge of your door is more than 32mm.
Distance from the euro cylinder to the edge of the door >32mm
The backset is the distance from the euro cylinder to the edge of the door. -
Ensure that the euro cylinder profile is located below the handle bar.
-
Ensure that you can unlock the door from the outside when a key is inserted on the inside.
-
Ensure that your key fits these dimensions.
Thickness of key: <5mm
Key head Width: <39mm
Key head Depth: <33mm -
For single cylinder, ensure that the thumbturn fits these dimensions.
Thumbturn Length: upto20-36mm
Thumbturn Width: upto30mm
Thumbturn Depth: upto29mm
NORDIC LOCK INSTALLATION
-
From the outside of the door, ensure that your cylinder looks like one of the two types supported.
-
Ensure that the distance from the cylinder to the edge of your door is more than32mm.
Distance from the nordic cylinder to the edge of the door >32mm
The backset is the distance from the nordic cylinder to the edge of the door. -
Ensure that your Nordic Cylinder is located above the door handle.
-
Remove the thumbturn inside the door and ensure that there is a tailpiece for the retrofit to fit onto.
Note: If your door lock does not have a tailpiece on the inside then please contact your sales representative or igloohome support as you will need to replace your key cylinder.