WAVLINK NWP501M1-B Wireless Powerline Extender Kit Installation Guide

WAVLINK NWP501M1-B Wireless Powerline Extender Kit

Wireless Powerline Extender Kits

Model : NWP501WM-B (1xWi-Fi/Powerline + 1xPowerline)
Model : NWP501M1-B (1xPowerline)

Hardwear Overview

WiFi+Powerline Extender

1. Power LED
2. LAN LED
3. LINK LED
4. Wi-Fi LED
5. Pair/Reset Button
6. LAN Port

Default Parameters

• URL: http://ap.setup
• Default IP: 192.168.10.1
• Login Password: admin Wi-Fi SSID: WAVLINK-N Wi-Fi Key: no

Pair / Reset Button

Press and hold for 1 second to start the Powerline pairing process.
Press and hold for 6 second to Reset the Device.

Powerline Extender

1. Power LED
2. LAN LED
3. LINK LED
4. Pair Button
5. LAN Port

Pair Button
Press and hold for 1 second to start the Powerline pairing process.

LED indicators

Environment

1. LAN port connects to your Router or Switch LAN port with an Ethernet cable.
2. Plug the powerline devices into the wall sockets near each other and on the same electrical circuit. The Powerline network default is Plug and Play,
3. Configure Wireless Settings

Configure Wireless Settings

The wireless settings can be configured through the web interface.

1. Plug in the Wi-Fi+PLC Extender into the wall sockets.

2. Disconnect the Ethernet (wired) connection to your computer.

3. Click the Wi-Fi icon on the taskbar and connect to the extender’s network: WAVLINK-N

4. Launch a web browser and type http://ap.setup in the address field. Use admin(all lowercase) for the Password to log in

5. CUSTOMER Thanh K45N144829691 – N

Environment 2

1. LAN port connect to your Router or Switch LAN port with an Ethernet cable.
2. Plug the powerline devices into the wall sockets near each other and on the same electrical circuit. The Powerline network default is Plug and Play.
3. Configure Wireless Settings

Set Up a Secure Powerline Network Using the Pair Button (Recommended)

You can create or join a secure powerline network using the Pair button on two devices at a time.
Tips : We recommend that you plug in the powerline devices near each other when pairing.

To create a secure powerline network:

1. Press the Pair button for 1 second
2. Within 2 minutes, press the Pair button for 1 second
3. Done

To join an existing secure powerline network

1. Press the Pair button for 1 second on any powerline device in the avictina nowerline notwork Within
2. minutes, press the Pair button for 1 second
3. Done

Attention

FAQ (Frequently Asked Questions)

1. Q1. How do I reset my Wi-Fi extender ?
   Power the winson and tre r. LED Stars to the rapid the rest as scompleten the

2. Q2. How to troubleshoot if there is no Internet connection in my powerline network?

3. A1.Make sure all adapters and extenders are on the same electrical circuit.

4. A2.Make sure the LINKLEDs light up on all your adapters and extenders. If they do not, pair your adapters and extenders again.

5. A3.Make sure all hardware connections are correctly and securely connected.

6. A4. Check if you have an Internet connection by connecting the computer directly to the modem or router.

7. A5.Make sure your computer’s IP address is in the same segment as your router’s.

8. Q3. What can I do if a successfully paired extender does not reconnect after it has been moved to a new location?

9. A1. Try another socket and make sure it is on the same electrical circuit.

10. A2. Try to pair it again with another adapter or extender, and make sure the LINK LEDs on before moving it to a new location.

11. A3.Check for possible interference, such as washers, air conditioners or other household appliances that may be too close to one of the powerline adapters or extenders.

GNU General Public License Notice

This product includes software codes developed by third parties. These software codes are subject to either the GNU General Public License (GPL), Version 2, June 1991 or the GNU Lesser General Public License (LGPL), Version 2.1, February 1999. You can copy, distribute, and/or modify in accordance with the terms and conditions of GPL or LGPL. The source code should be complete, if you want us to provide any additional source code files under GNU General Public License (GPL), please contact us in these matters. We are committed to meeting the requirements of the GNU General Public License (GPL). You are welcome to contact us local office to get the corresponding software and licenses. Please inform us your contact details (full address)and the product code. We will send you a software package with the software and license for free. The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the GNU General Public LicenseWeb site for further information. http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html http://www.gnu.org/licenses/gpl.html

WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>