GLOBAL INDUSTRIAL 27954 2 Tier 2 Door Digital Wood Locker Instruction Manual

GLOBAL INDUSTRIAL 27954 2 Tier 2 Door Digital Wood Locker

Product Information

Specifications:

• Model: [Insert Model Name]
• Material: Steel
• Dimensions (mm): [Insert Dimensions]
• Weight: [Insert Weight]

Product Usage Instructions

Back-to-back Cabinet Installation:

1. Ensure that the area where the cabinets and their bases will be installed is plumb and level.
2. Check the ventilation spacing between the back of the cabinets and ensure that the side panels have been properly installed. The side panels must fully touch each other.
3. Align the cabinets to secure them back-to-back.
4. Install the metal plates on top of the cabinets as shown below:

Mounting Cabinets to the Wall:

1. Ensure that the area where the cabinets and their bases will be installed is plumb and level.
2. Check the ventilation spacing between the back of the cabinets and ensure that the side panels have been properly installed. The side panels must fully touch the wall.
3. Align the cabinets to secure them to the wall.
4. Fold the metal plate and install it on top of the cabinets.

Side Panel Installation (Add-on sold separately):

1. Ensure that the area where the cabinets and their bases will be installed is plumb and level.
2. Position the side panels so that they’re aligned with the front of the cabinet body (not the door). The spacing created between the end of the panel and the back of the cabinet is for ventilation.
3. Use the hardware that comes with the side panel to join them through the existing holes inside the cabinet wall.

Metal Base Installation (Add-on sold separately):

1. Ensure that the area where the cabinets and their bases will be installed is plumb and level.
2. Position the metal base, aligning and centering it on the body of the previously joined cabinets.
3. Use the hardware that comes with the metal base component to join the parts onto the metal base to the cabinet base.

Corporate Assembly – Join Cabinets:

1. Start by positioning the cabinets side by side, ensuring they are plumb and level.
2. Use hardware (H) to join them through the existing holes inside the cabinet wall.

FAQ (Frequently Asked Questions)

1. Q: How do I clean or remove stains from the product?
   A: To clean or remove stains, use a piece of flannel dampened with a mixture of alcohol and water. Avoid direct sunlight.

HARDWARE LIST

The hardware drawings are full-scale so their dimensions are the same as the actual hardware.

• 1 Step

• 2 Step

Metal base installation (add-on sold separately)

1. Make sure that area where the cabinets and their bases will be installed is plumb and level.
2. Position the metal base, aligning and centering it on the body of the previously joined cabinets.
3. After they are positioned, use the hardware that comes with the metal base component to join the parts on to the metal base to the cabinet base, as shown below.

Corporate assembly

Join cabinets

1. Start by positioning the cabinets side by side, ensuring they are plumb and level.
2. After they are positioned, use hardware (H) to join them through the existing holes inside the cabinet wall, as shown below.

Side panel installation (add-on sold separately)

1. Make sure that the area where the cabinets and their bases will be installed is plumb and level.
2. Position the side panels so that they’re aligned with the front of the cabinet body (not the door) Check-01. The spacing created between the end of the panel and the back of the cabinet is for ventilation Check-02.
3. After they are positioned use the hardware that comes with the side panel to join them through the existing holes inside the cabinet wall as shown below.

Mounting cabinets to the wall

1. Make sure that the area where the cabinets and their bases will be installed is plumb and level.
2. Check the ventilation spacing between the back of the cabinets and ensure that the side panels have been properly installed. Align the cabinets to secure them to the wall. The side panels must fully touch the wall.
3. Fold the metal plate and install it on top of the cabinets as shown below.

KIT TO AVOID TIPPING

Back-to-back cabinet installation

1. Make sure that the area where the cabinets and their bases will be installed is plumb and level.
2. Check the ventilation spacing between the back of the cabinets and ensure that the side panels have been properly installed. Align the cabinets to secure them back-to-back. The side panels must fully touch each other.
3. Install the metal plates on top of the cabinets as shown below.

Maintenance Tips

• To clean or remove stains, use a piece of flannel dampened with a mixture of alcohol and water. Avoid direct sunlight.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>