HYTOBP S166 Drone with Camera User Guide
- June 16, 2024
- HYTOBP
Table of Contents
- HYTOBP S166 Drone with Camera
- IMPORTANT INSTRUCTION
- INSTRUCTIONS WHEN CHARGING:
- OBSTACLE AVOIDANCE FUNCTION/ONE KEY RETURN HOME
- Headless mode/One key return
- GYRO CALIBRATION / GEOMAGNETIC CALIBRATION
- OUTDOOR FLIGHT OPERATION METHOD
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HYTOBP S166 Drone with Camera
Before using the product, please read this instruction manual carefully and try to choose to fly in an environment with good air and light This will ensure the normal operation of GPS mode and optical flow mode
Scan the QR-code to get guide video
IMPORTANT INSTRUCTION
-
This product is not a toy but a precisve equipment that integraing mecharics and electronics with expertise of aerodynamics and high-frequency transmitting.
It requires to be correctly assembled and debugged so as to prevent the accident from being happened. The product owner should operate or control it in safe way.
Please noted that we wont take any responsibility for any wrong operation as his may result in severe injury or loss of property and we can not control the operrating process during the time when the user assemble or use this prodis product. -
This product is suitable to be used by people who has operating experience in flying model or age no less than 14 years old.
-
The flying ground we required should be the local field and legal for remote control flying.
-
0nce this product is sold, we won’t be responsible for any safety responsibity during the time the user operates or uses or controls this product.
-
lf there is any problem occured during the time of using,operating or repairing, please reach our sales agent for details. The sales agent that we authorized will provide you with the technical support and after-sale service.
CONTROLLER COMPONENTS
REMOTE CONTROL CHARGING
Follow the electrode indications ( +/-) of the battery box as shown Insert the
battery correctly (as shown).
CHARGING MODE((7.4 V LITHIUM BATTERY))
- Use the special charger for drone supplied by our factory for charging. Insert the lithium polymer battery plug into the charger socket, as shown in the figure.
- To ensure safety, the charging must be carried out within the sight range.
BATTERY WARNING
Lithium Polymer batteries can expand, burst or catch fire if used incorrectly,
causing both property damage and or personal injury. It is essential that you
follow all the included instructions and safety warnings in full. The
manufacturer, distributors and retailers will assume no liability for the
failure to comply with these safety instructions and warnings.
INSTRUCTIONS WHEN CHARGING:
- The battery must be removed from the product before charging.
- If the battery has just been used, please let it cool down to room temperature before charging.
- Charging must only be undertaken by an Adult, and only using the charger included with this product.
- Always charge the battery on a non flammable heat resistent surface with non flammable surroundings.
- Connect the battery to the USB charging cable
- Lithium Polymer batteries do not last forever. If your battery becomes damaged in a crash or no longer charges properly, immediately replace it with a new battery. To prolong the life of your battery, it is always best to retain a bit of charge in your battery prior to charging it.
FLIGHT ACTION ADJUSTMENT AND SETTING
Please be familiar with the simulation flight before flight.
Before you understand the operation of each action of the drone, it is
strictly forbidden to fly the drone. Please read the instructions first,
Familiar with the control of various directions and repeat until the fingers
can skillfully control various movements and directions.
- Place the drone in an open place and aim the back of the drone at yourself.
- Practice operating each rocker of the remote control (the operation mode of each action is shown in the figure below), and practice the accelerator repeatedly High/ low, aileron left/ right, elevator front/ rear and rudder left/ right operation mode.
- The practice of simulated flight is very important. Please repeat the exercise until you don’t need to think and your fingers can follow naturally Call out command movement control.
ADJUSTING CAMERA UP / DOWN
When using DRONE, you can adjust the camera direction up and down by dialing
the servo button.
Steering gear up
- When the drone is flying, press the steering button to the left.Adjust the camera up Steering gear down
- When the drone is flying, press the steering button to the right.Adjust the camera down
HIGH / LOW SPEED SWITCHING
To switch the flight speed mode, click the low speed mode, then press again to
enter the medium speed mode, Press again to enter the high-speed mode and
cycle through it.
OBSTACLE AVOIDANCE FUNCTION/ONE KEY RETURN HOME
OBSTACLE AVOIDANCE FUNCTION
- Long press to enable the obstacle avoidance function, and then long press to exit the obstacle avoidance function.
- Press the obstacle avoidance button, the aircraft will automatically sense (sensing range 0.8 to 1.5 meters) the obstacles on the left and right sides, and the lights on the four arms of the aircraft will start to flash rapidly after sensing, and then move back about 20 cm to stop. Press the button again to turn off the function. There is no obstacle avoidance effect in sunlight. (The obstacle avoidance function is recommended to be turned on indoors 6X6 meters above)
Headless mode/One key return
HEADLESS MODE
The aircraft is in normal mode by default. The remote controller is laid flat,
and the antenna is horizontally aligned with the tail of the aircraft. Press
the button to enter headless mode, and then press again to exit headless mode.
In the headless state, the controller does not need to identify the nose
position of the aircraft, but only needs to control the aircraft according to
the direction of the joystick of the remote controller. ONE KEY RETURN
Short press the key to return, the aircraft will automatically return to the
direction of take-off, one-key return can only automatically back to take off,
can not do backward Land to the take-off point, and then press the button or
push the left rocker up to exit the return course.
GYRO CALIBRATION / GEOMAGNETIC CALIBRATION
GYRO CALIBRATION
Turn on the power to the vehicle and place the vehicle horizontally Lay flat
on the ground and press the button to calibrate the gyroscope (as shown in the
figure), the front and rear lights of the calibrating arm flash quickly. After
gyroscope calibration is complete, the rear light of the arm blinks slowly.
GEOMAGNETIC
CALIBRATION
Press and hold the button for geomagnetic calibration (as shown in the
picture), the geomagnetic indicator light is on, the remote control makes a
“beep”, the aircraft headlight flashes slowly and enters the geomagnetic
calibration mode, pick up the aircraft and hover about 30 cm above the ground.
With the aircraft head facing forward, rotate clockwise until the remote
control makes a “di” sound, then turn the aircraft head upwards and rotate
clockwise until the remote control makes a “di” sounds to indicate that the
geomagnetic calibration
is completed.
ONE KEY TAKEOFF/ ONE KEY LANDING/ LONG PRESS EMERGENCY STOP
Press “One key to take off” the drone will automatically take off, then press
the drone to automatically land, long press the drone to stop
Note: If the height of the drone exceeds 5 meters, emergency stop and one- key descent will be invalid.
GPS SWITCH
The remote control defaults to outdoor mode. Long press and hold the GPS
button, the remote control emits a “beep” sound, and the GPS indicator light
lights up, indicating that it has switched to indoor mode. Press and hold for
about 3 seconds, the remote control will emit a “beep” sound, and the GPS
indicator light will turn off, indicating that it has switched to outdoor mode
and will cycle accordingly.
INDOOR FLIGHT OPERATION METHOD
- Place the aircraft at the takeoff point, turn on the aircraft switch, and when the front and rear lights of the aircraft change from long on to slow flashing, you can turn on the remote control. The remote control display light is constantly on, emitting three beeps to indicate that the aircraft has been connected and the front lights of the aircraft are constantly on.
- Long press the GPS button on the remote control, the remote control emits a “drip” sound, and the GPS indicator is off, indicating that it has switched to indoor mode.
- Short press the button to calibrate the gyroscope, and the headlight of the aircraft is steady on, indicating that the calibration has been successful.
- At the same time, push the left push rod of the remote control to the lower right, and push the right push rod to the lower left to start the aircraft.When the blade of the aircraft starts to turn slowly, press the “one-button take-off” button, or dial the throttle up to start Flying aircraft.
OUTDOOR FLIGHT OPERATION METHOD
- Place the aircraft at the take-off point, turn on the aircraft switch, and wait until the front and rear lights of the aircraft are cleared When the long light turns to a slow flash, you can turn on the remote control. The remote control display light is on and emits three sounds of “drip drip drip”, indicating that the aircraft has been connected.At the same time, the headlight of the aircraft is steady on.
- Long press the button for geomagnetic calibration (as shown in the figure), the geomagnetic indicator light will light up, and the remote control will make a “drop” sound. The aircraft will enter geomagnetic calibration mode, pick it up about 30 centimeters above the ground, turn the aircraft head forward, clockwise until the remote control makes a “drop” sound. Then, turn the aircraft head upwards, clockwise until the remote control makes a “drop” sound, indicating that geomagnetic calibration is complete.
- Waiting for the star search, the tail light of the aircraft changes from slow flashing to steady light, indicating that the star search has been completed, and the remote control emits a “beep” sound.
- Short press the button to calibrate the gyroscope. When the front and rear lights of the aircraft flash rapidly, it means that the calibration has been successful.
- At the same time, push the left push rod of the remote control to the lower right, and push the right push rod to the lower left to start the aircraft.When the blade of the aircraft starts to turn slowly, press the “one-button take-off” button, or dial the throttle up to start Flying aircraft.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>