HYTOBP P8 pro 4K Drone User Manual

HYTOBP P8 pro 4K Drone User Manual

https://www.hytobp.net/

Important safety information

1. The product is not a toy, but the mechanical, electronic, aerodynamics, high-frequency transmission and other professional knowledge into one of the fine Dense equipment, the need for proper assembly and commissioning to avoid accidents. The product holder must use a safe way. Operation control: improper operation, may cause serious personal injury or property damage. We are not responsible for this, Because we can not control the assembly, use, operation process.
2. This product is suitable for people with operating model experience, the age of not less than 14 years of age.
3. The flight site must be a local legal remote control model flight site.
4. Once the product is sold, we will not be responsible for any safety and safety arising from operation and use, control, etc.
5. If any using, operating and measuring problems, please contact with local distributors, for we have assigned those distributors to provide technical support and after sales service.

2.Safety Precautions:

Remote control model aircraft is a high-risk goods, must be away from the crowd when flying. Artificial assembly or body damage, electronic control. Improper equipment, and operation are not familiar with, are likely to cause damage to the aircraft or personal injury and other unpredictable accidents. please. Pilots must pay attention to safety, and need to understand due to their own negligence caused by accidental responsibility.

1. Away from obstacles and crowds
   The flight of the remote control flight has an uncertain flight speed and state, there is a potential risk. Fly away from the flight. People, high-rise buildings, high-voltage wires, etc., while avoiding wind and rain, thunderstorms and other bad weather flight to ensure that pilots, The surrounding population and the safety of the property.

2. Away from the damp environment
   The interior of the aircraft is made up of many sophisticated electronic components and mechanical parts, so it is necessary to prevent the aircraft from wet or Into the body, so as to avoid mechanical, electronic components failure caused by accidents!

3. Safe operation
   Please operate the remote control aircraft according to your own status and flight skills. Fatigue, poor spirit or improper operation will increase. Probability of accidental risk.

4. Keep away from high-speed rotating parts
   When the propeller in the high-speed flight, the pilot, the surrounding crowd and objects away from the rotating parts, so as to avoid danger and damage.

5. Keep away from heat
   Remote control aircraft is composed of metal, fiber, plastic, electronic components and other materials, so as far as possible away from heat, to prevent day. Drying, to avoid deformation caused by high temperature or even damage.

The plant is made of lithium polymer battery ( LiPo)

Lithium batteries are different from the general battery, which consists of a thin layer of thin paper wrapped with its chemical endoplasm. This can be great. To reduce its weight, but it makes it more vulnerable in the face of rough or inappropriate operations. Like the same. There is a battery, as inappropriate operation will cause a fire explosion.

• ⚠ Do not put the battery in the model for charging, which may cause the battery to fire and damage you of the aircraft.
• If you plan to use this product for one week or more, keep the battery 50% Increase the battery life. Keep the battery 50% of the battery, just use the battery when fully charged Half of the time to charge.
• Please use the original professional charger to charge the battery.
• Do not charge the carpet to prevent fire.
• Lithium battery in the storage for more than three months after the need to charge to maintain the voltage to ensure that it should have Of life.

Remote control and aircraft battery installation and charging

instructions

Aircraft installation

1. Folding function display
   When folding, please fold the back Show arms, and then folded in front of the arm, Expand the opposite!

2. Aircraft fan installation
   Please follow the correct direction to install the propeller, propeller on the sign. Installed to the upper left corner of the aircraft and the lower right corner of the arm, with the phase. With the propeller on the sign B mounted to the upper right corner of the aircraft and the I owner left. Corner of the arm, the installation of the fan folder when the alignment of the cone assembly Square accessories, installed in place after the locking screw!

Remote control function name

Remote control

1. Mobile phone rack
   Pull out the remote control lower bracket, clamp the phone.

2. 2.4G frequency
   Open the aircraft power switch, the aircraft placed in the flat Ground, then the aircraft indicator light flashes, open the remote control power. Source switch, Buzzer prompt “tick” sound! The aircraft indicator light is on, right Frequency to complete, then you can take off!

3. A key to start and a key landing
   Tip: This product is determined by the barometer. In a variety of environmental temperature and other factors, The aircraft will automatically start when flying or low voltage. Appear high and low changes are normal!

4. Flight control

5. Fine-tuning control (with camera front side)

Directional definition and mode selection of headless mode

When converting to headless mode, the aircraft will give up its front and rear azimuths, and reposition the front and rear with the remote control as a reference point. Such as: when the right lever to push forward, the aircraft will fly away from the remote control; when the right lever to pull back, the aircraft will fly to the remote control. (With camera front side)

1. The direction of the aircraft before departure: the direction of the aircraft forward m front of you,(W1th the camera side the front) remote control to the end of the direct flight and then press a key. Take off, that is, to complete the flight head mode direction definition.
2. When flying by the headless mode of the remote control issued a “flute, flute” twice, the aircraft lights Light flashing into the headless mode. And then press the remote control issued a “flute” sound Exit the headless mode.

Speed selection

Speed file is to advance, back and left and right side of the flight is divided into third gear speed, the remote control is turned on by default when the slow power, press the remote control button issued a ‘flute” “flute” twice as midfielder, “flute” · ” Flute “press
three times for the fast file,· flute “soon return to slow file. (Recommended beginners with slow operation)

Obstacle avoidance switch

After turning on the aircraft, short press the obstacle avoidance mode button to turn on the obstacle avoidance mode The aircraft eye light will start to flash slowly, that is, the obstacle avoidance mode is working. at the same time Short press the obstacle avoidance button to turn off (the aircraft eye light will not start flashing at this time)

References

• HYTOBP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>