Whirlpool MW8650XS Microwave Oven User Guide

June 16, 2024
Whirlpool

MW8650XS Microwave Oven

Product Information: Microwave Oven Model MW8650XS

Specifications

  • Model: MW8650XS
  • Vents: Yes
  • Defrost Guide: Yes
  • P-Position: Yes
  • Latch: Yes

Parts and Features

The microwave oven model MW8650XS is equipped with the following
parts and features:

  • Vents
  • Defrost Guide
  • P-Position
  • Latch
  • Auto Set Time/Temp Guide (not shown)

Before You Install Your Microwave Oven

Before installing your microwave oven, please read and carefully
follow the Installation Instructions found on page 24 of the Use
& Care Guide.

Before You Use Your Microwave Oven

Read the Use & Care Guide carefully for important use and
safety information. Store it in a convenient place for future
reference.

It is your personal responsibility and obligation to ensure that
your microwave oven:

  • Has been installed on a surface strong enough to support its
    weight.

  • Has been properly connected to an electrical supply and
    grounded. (See Installation Instructions on page 24.)

  • Is not used by children or anyone unable to operate it
    properly.

  • Is properly maintained.

  • Is used only for jobs expected of a home microwave oven.

Precautions to Avoid Possible Exposure to Excessive Microwave

Energy

To avoid possible exposure to excessive microwave energy, please
follow these precautions:

  • DO NOT attempt to operate this oven with the door open, as
    open-door operation can result in harmful exposure to microwave
    energy.

  • DO NOT defeat or tamper with the safety interlocks.

  • DO NOT place any object between the oven front face and the
    door or allow soil or cleaner residue to accumulate on sealing
    surfaces.

Important Safety Instructions

For important safety instructions, please refer to the Use &
Care Guide provided with your microwave oven.

Using Your Microwave Oven

Microwave Oven Controls

The microwave oven is equipped with various controls to adjust
settings and operate the oven. Refer to the Use & Care Guide
for detailed instructions on using the controls.

Audible Signals

The microwave oven emits audible signals to indicate different
events or actions. These signals help you monitor the progress of
your cooking. Refer to the Use & Care Guide for a list of
audible signals and their meanings.

Setting the Clock

To set the clock on your microwave oven, follow the instructions
provided in the Use & Care Guide.

Using the Minute Timer

The minute timer allows you to set a specific duration for your
cooking. Refer to the Use & Care Guide for instructions on
using the minute timer.

Cooking in Your Microwave Oven

Cooking at High Cook Power

When cooking at high cook power, follow the recommended cooking
times and power levels provided in the Use & Care Guide for
different types of food.

Cooking at Lower Cook Powers

For cooking at lower cook powers, refer to the Use & Care
Guide for recommended power levels and cooking times for different
food items.

Using AUTO SET

The AUTO SET feature allows you to automatically set the cooking
time and power level based on the type of food you are cooking.
Refer to the Use & Care Guide for instructions on using the
AUTO SET feature.

Cooking Automatically After Defrosting

To cook automatically after defrosting, follow the instructions
provided in the Use & Care Guide.

Cooking with the Temperature Probe

The temperature probe allows you to cook food to a specific
internal temperature. Refer to the Use & Care Guide for
instructions on using the temperature probe.

Using KEEP WARM

The KEEP WARM feature keeps your cooked food warm for a certain
period of time. Refer to the Use & Care Guide for instructions
on using the KEEP WARM feature.

Other Operating Hints

For additional operating hints and tips, please refer to the Use
& Care Guide.

Installation Instructions

For detailed installation instructions, please refer to page 24
of the Use & Care Guide.

Grounding Instructions

Proper grounding is essential for the safe operation of your
microwave oven. Follow the grounding instructions provided in the
Use & Care Guide.

Building in Your Microwave Oven

If you plan to build in your microwave oven, please refer to the
instructions provided in the Use & Care Guide.

Caring for Your Microwave Oven

Cleaning the Microwave Oven

To clean the microwave oven, follow the cleaning instructions
provided in the Use & Care Guide.

Replacing the Light Bulb

If the light bulb in your microwave oven needs to be replaced,
refer to the Use & Care Guide for instructions on how to do
so.

How Your Microwave Oven Works

For a detailed explanation of how your microwave oven works,
please refer to the Use & Care Guide.

Operating Safety Precautions

For operating safety precautions, please refer to the Use &
Care Guide.

If You Need Service or Assistance

If you require service or assistance with your microwave oven,
please refer to the Use & Care Guide for contact
information.

Microwave Oven Warranty

For warranty information related to your microwave oven, please
refer to page 32 of the Use & Care Guide.

Frequently Asked Questions (FAQ)

Q: Where can I find the model and serial numbers of my microwave
oven?

A: The model and serial numbers can be found on a plate behind
the microwave oven door on the oven frame.

Q: Where can I find the purchase date of my microwave oven?

A: The purchase date can be found on the sales slip.

Q: How do I register my microwave oven?

A: Fill out and return the Microwave Registration Card included
with your oven. If the card is missing, send the model number and
serial number of your microwave oven, along with your name and
address, to Whirlpool Corporation Microwave Registration
Administrative Center at the provided address.

Model MW8650XS

Search

Contents

Parts and Features

Before You Install Your

Microwave Oven

Before You Use Your

Microwave Oven

Precautions to Avoid’Possible

Exposure to Excessive

Microwave Energy

Important Safety Instructions

Using Your Microwave Oven

Micrawave Oven Controls

Aud’ble Signals

Setting the Clock

Usin!? the Minute Timer

Cooking in Your Microwave Oven

Cooking at High Cook Power..

Cooking at Lower Cook POWerS

Using AUTO SET

Auto Set TIME

Auro Set TEMP : :,

: :.

Page

zfrostlnc;

15

:ooklng Automctlcal:y Atier

Defrosting

16

,.:ooklng with the Temperature Probe 18

!.Jslng KEEP WARM

2?

r:>ther Operating Hints

22

RI-Level Cooking

23

Installation Instructions

24

Grounding Instructions

25

BulldIng in Your Microwave Oven

26

Caring for Your Microwave Oven

26

c Cleaning the Microwave Oven

26

e Replaclna the Light Bulb

26

; How Your h%crowave Oven Works..

27

F Operating Safety Precautions

28

8 If You Need Service or Assistance.

30

5 Microwave Oven Warranty

32

I:

1″

13

~1988 wnirlpool C;orporarton

Parts and feratures

VENTS

Model MW8650XS

DEFROST GUIDE

P-POSITION

LATCH

AUTO SETTIME/TEMP GUIDE (not shown)

Thank you for buying a Whirlpool appliance. Please complete and mail the Owner Registration Card provided with this product. Then complete the form below Have this information ready if you need service or call with a question

l Copy model and SeriCIl numbers from plate [behind the microwave oven door on the oven frame) and the purchase date from the sales slip.
l Keep this book and your sales slip together in a handy place.

Mode, Number Serial Number -Purchase Date Service Company Phone Number

2

Search

Fill out and return the Microwave Registration Card included with your oven. If the card is missing, please send the model number and serial number of your microwave oven with your name and address to…

Whirlpool Corporation Microwave Registration Administrative Center 2000 M-63 Benton Harbor, Michigan

Department 49022

This Information WIII help us reach you ofthere IS ever a need to pass along Information about your mlcrowave over1

Before you install your microwave oven
Read and carefully follow the “Installation Instructions” found on page 24 of this Use & Care Guide.


Berore you use your microwave oven

Read this Use & Care Guide carefully for important use and safety information. Store in a convenient place for future use.

It is your personal responsibility and obligations to be sure your microwave oven:
l Has been installed where it is protected from the weather. The microwave oven should be at a temperature above 50°F (10°C) for proper operation.
l Has been installed on a surface strong enough to support its weight, l Has been properly connected to electrical supply and grounded. (See
“Installation Instructions” found on page 24.)

l Is not used by children or anyone unable to operate l Is properly maintained. l Is used only for jobs expected of a home microwave

it properly. oven.

PRECAUTIONS TO AVOID
POSSIBLE EXPOSURE TO EXCESSM MICROWAW ENERGY…

DO NOT attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.
DO NOT place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces.

DO NOT operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the (1) Door (bent). (2) Hinges and latches
(broken or loosened), (3) Door seals and sealing
surfaces.
DO NOT operate the microwave oven if the door window is broken

The microwave oven should be checked for microwave leakage by qualified service personnel after a repair is made.
The oven should not be adjusted or repaired by anyone except properly qualified service personnel.
DO NOT operate the microwave oven with the outer cabinet removed.

Search

Microwave ovens have been thoroughly tested for safe and efficient operation. However, as with any appliance, there are special installation and safety precautions which must be followed to ensure safe and satisfactory operation and prevent damage to the unit.

1. Read cll rnstructrons
appliance

before using

2. Read and follow the specific “PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY” found on page 3.

3. This appirance must be grounded. Connect only to properly grounded outlet. See “GROUNDING INSTRUCTIONS” found on page 25.

4. Install or locate this appliance only in accordance with the provided “Installation Instructions” found on page 24.

5. Some products such as whole eggs and sealed containers – for example, closed glass jars – may explode and should not be heated In this oven.
6. Use this appliance only for its intended
use as described in this manual.

7. As with any appliance, close supervision is necessary when used by children.

8. Do not operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. Electric shock, fire or other hazards may result.

9. This appliance should be serviced only

by qualified service personnel. Call a

Whirlpool authorized TECH-CARE u Service

Company for examination,

repair or

adjustment.

10. Do not cover or block any opening on
the appliance, for fire may result.

11. Do not use outdoors for damage to the
oven or electric shock may result.
12. Do not immerse cord or plug in water for electric shock may result.
13. Keep cord away from heated surfaces for electric shock may result.
14. Do not let cord hang over edge of table or counter for electric shock may result.
15. See door surface cleaning instructions on page 26.
16. To reduce the risk of fire or fire in the
oven cavity
a. Do not overcook food. Carefully attend appliance if paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. Paper can char or burn, and some plastics can melt if used when heating foods.
b. Test dinnerware or cookware before using. See page 29. Some dishes (melamine, Centura,” etc.) absorb microwave energy, becoming too hot to handle and slowing cooking times. Remove wire twistties from paper or plastic bags before placing bag in oven. Cooking in metal containers can damage the oven. So can containers with hidden metal (twist-ties, foil lining, staples, metallic glaze or trim.)
c. If materials inside the oven should ignite, keep oven door closed, turn oven off, and disconnect the power cord, or shut off power at the fuse or circuit breaker panel.
17. Read and follow “Operating Safety Precautions” starting on page 28.

SAW THESE INSTRUCTIONS

Search

Using your microwave oven

Microwave Oven Controls

There are three parts in the control section: -The Digital Display/Clock, and Indicator -Command Pads – Number Pads

Lights

Instructions for each control are covered on the following pages. Read them carefully.

When you first plug in the oven, a tone sounds and the Display will show 88:88. If after you set the Clock (page 6), the Display again shows all 8’s; your electricity was off for a while. Reset the Clock.

Digital Display/Clock and Indicator lights

When you are not using the microwave oven, this is an accurate Digital Clock. When you are using the microwave oven, it displays time settings, Indicator Lights and shows what Number Pads you touched.

Command Pads

Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
– CLOCK SETtells the oven you are going to set the Clock.
– START tells the oven to start.
See page 6 for information on the tone you hear when touching any pad.

Each Command Pad, (except START,CANCEL and CLOCK SET] lights an Indicator Light on the Digital Display. The Indicator Light comes on when you touch the Command Pad.
While the oven is running, an Indicator Light (or lights] will be on to show what the oven is doing.

Number Pads

0 8

-a food

temperature.

Search

Audible Signals

Audible signals are available to guide you when setting and using your oven. (A programming tone will sound each time you touch a pad. Two beeps will sound between cycles. A reminder tone will sound every 60 seconds after cooking is done to remind you that something has been left in the oven. A 3 second tone signals the end of the Minute Timer function.] If you don’t hear a tone, it is because of incorrectly entered instructions or because the tones have been removed. For example, a tone will not sound if you touch a Number Pad before you touch a Command Pad.

To remove the programming tone:

tone and reminder

l Open the door.

l Touch CANCEL twice, then touch START.

l Programming and reminder tones will be cancelled

To remove all tones, except the Minute Timer signal:
l Open the door.
l Touch CANCEL twice, touch 0, then touch START.
l All audible tones (except Minute Timer signal) will be cancelled.

To replace the tones: l Repeat the steps above.

To replace the tones: l Repeat the steps above.

Setting the Clock

When the oven is first plugged in, a tone sounds and the Display shows “88:88:’ If the electric power ever goes off, the Display will again show all 8’s when the power comes back on.
You can cook or use the Minute Timer without setting the Clock, but the Display will be blank after cooking

DO THIS…

THIS HAPPENS…

1. Touch CLOCK SET.

The Display will show a “0” and the colon will start to flash. The first Number Pad must be touched within 5 seconds or the Display will go blank. Touch CLOCK SETagain and continue.

2. Touch Number Pads for the correct time of day.

The Display will show what numbers you touched in the order you touched them. This example shows “3:25.”

3. Touch START.

The colon will stop flashing. The Clock is set.

If you have touched in an incorrect time, such as12:65, “Err” will show on the Display. Touch CLOCK SETand start over.
NOTE: To m the Clock, touch CLOCK SET. The current time will show on the Display and the colon will flash. Continue to set the Clock as shown above.

Search

Using the Minute Timer

The Minute Timer does not start or stop cookina. It can be used alone or while the oven is operating. It works like a kitchen timer.

DO THIS…

THIS HAPPENS…

em
1. Touch MINUTE TIMER.
omm 2. Touch Number Pads for
minutes and seconds.

The MINUTE TIMER Indicator Light will come on and the Display will show a “01′ The first Number Pad must be touched within 5 seconds or the Display will again show the time of day. Touch MINUTE TIMER again and continue.
The Display will show what numbers you touched in the order you touched them. This example shows 1 minute, 45 seconds.

m
3. Touch START

The MINUTE TIMER Indicator Light will stay on to show that the Minute Timer is running.
The Display counts down the seconds to show how much time IS left on the Minute Timer
When the set time is up, a 3 second signal will sound and the Display will show the time of day.

Changing the Minute Timer
-Touch MINUTE TIMER -Touch numbers to set new time – Touch START. New instructions cancel the old ones.

Cancelling the Minute Timer
-Touch MINUTE TIMER. -Touch CANCEL. Note. Touch MINUTE
TIMER before touching CANCEL to cancel just the Minute Timer. If CANCEL is touched first, all cooking instructions will be cancelled and the Minute Timer will continue to operate.

The Minute Timer can be set to time other activities while the oven is operating in any other cycle, The Display will countdown the time of the cycle in operation. The Minute Timer will continue to countdown, but will not show on the Display. When the time is up, a 3 second signal will sound.
Opening the oven door does not stop the Minute Timer countdown; however, it does stop any cookrng or defrosting. Close the door and touch STARTto continue cooking or defrosting

Search

Cooking in Your Microwave Oven
Be sure to read the MICRO MENUS” Cookbook packed with the microwave oven. It contains information about:
l What microwave energy is l How food is cooked by microwave energy. l What affects cooking speed and cooking evenness. l Safety tips. l Utensils to use when cooking in a microwave oven. l Cooking times for different foods.
Important things to remember to get the best cooking results. l ALWAYS cook food for the minimum recommended cooking time. If necessary, add time
in one or two minute periods, then check for doneness to avoid overcooking the food. l Star,turn or rearrange the food being cooked about halfway through the cooking time
for most even doneness with all recipes. l If a glass cover is not available, use waxpaper, paper towels or microwave approved
plastic wrap Turn back a corner to vent steam during cooking.

Cooking at High Cook Power

DO THIS…

THIS HAPPENS…

1. Put food in the oven and
close the door.

The COCK Indicator Light will come on and the Display will show four 0’s.

2. Touch COOK.

3. Touch Number Pads for the cooking time you want.
4. Touch START.

The Display will show the numbers you touched in the order you touched them. The example shows 1 minute, 30 seconds.

The oven will automatically HIGH Cook Power.

cook at

The COOK Indicator Light will stay on to show that the oven is cooking in the first cycle.

8

Search

dOtaWull nt

The Display counts down the time to show how much time is left in the first cycle.
When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.

Changing the Cooking Time

Cooking time can be changed any time before
1. Touch COOK. 2. Touch numbers for the new time. 3. Touch START.

touching

Cook cycle will continue cooking for the new time.

STARTor during the cycle

Cooking at Lower Cook Powers

For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the slower the cooking. Each Number Pad also stands for a different percentage of Cook Power. Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or percentage [ 10% 50% 80% etc.).

The following chart gives the percentage of Cook Power each Number Pad stands for, and Cook Power name usually used.

automatic 100% of full power 9 ~ 90% of full power 8 ~ 80% of full power 7 70% of full power 6 ~~ 60% of full power 5 ~ 50% of full power

HIGH
MED-HIGH MED

4 40% of full power 3 30% of full power MED-LOW 2 20% of full power
10% of full power LOW no power [fan and light will be off)

DO THIS…

THIS HAPPENS…

1. Put food in the oven and
close the door.

The COOK Indicator Light will come on and the Display will show four O’s

2. Touch COOK.

3. Touch Number Pads for the cooking time you want.

The Display will show the numbers you touched in the order you touched them. This example shows 7 minutes, 30 seconds.

continued on next page 9

Search

m..
4. Touch COOK POWER.
5. Touch a Number Pad for the Cook Power you want.
6. Touch START.

The COOK POWER Indicator Light will come on and the Display will show “P-HI!’ This shows the oven is preprogrammed to cook at full (HIGH] power.
The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.
The COOK and COOK POWER Indicator Lights will stay on to show that the oven is cooking at a Cook Power other than HIGH.

d Count OWtl

The Display counts down the time to show how much cooking time is left in the first cycle
When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.

Changing the Cook Power

The Cook Power can be changed any time before touching STARTor during the cycle.

l Touch COOK POWER l Touch a number for the new Cook Power. l Touch START The cycle WIII cook at the new Cook
OR… l Touch COOK POWER twice If you want to change . Touch START

Power for the orlgrnal a lower Cook Power

time to HIGH

10

Search

Using AUTO SET
Auto Set TIME and TEMP are preset cooking times and probe temperature settings.

cycles which store commonly

used cooking

Auto Set TIME
Auto Set TIME provides ten preset times. One to nine at HIGH Cook Power can be set by touching TIME and the corresponding Number Pad 1-9. This provides a short-cut method for setting commonly used cooking times.
The Auto Set Chart included with your microwave oven and the Auto Set Guide on the inner door panel help you use the TIME Pad to cook various food items without having to look up the cooking time.
A preset time of 2 minutes, 30 seconds at HIGH Cook Power is available by touching just the TIME Pad. The time may be changed to any time from O-99 minutes, O-99 seconds allowing you to store your favorite cooking time and Cook Power. See page 12 for instructions.

DO THIS… 1. Put food in the oven and
close the door.
2. Touch TIME.
(Option: Skip to Step 6 if you want to use the preset cooking time and Cook Power.)
3. Touch a Number Pad for the new cooking time you want from 1 to 9 minutes.
4. Touch COOK POWER.
(Option: Skip to Step 6 if you want to cook at HIGH power.)

THIS HAPPENS…

The AUTO SET Indicator Light will come on and the Display will show 2 minutes, 30 seconds (or the time you have set as your favorite cycle).
The Display WIII show what you touched in even mrnutes This example shows 4 minutes
The COOK POWER Indicator Light will come on and the Display will show “P-HI:’ This shows the oven is preprogrammed to cook at full (HIGH) power.
continued on next page

Search

Q
5. Touch a Number pad for the Cook Power you want.

The Display WIII show what you touched This example shows you touched Number Pad 5 for 50°0 of full Dower

6. Touch START.

d IXUflk ClLLln

The AUTO SET Indicator Light will stay on while the oven is cooking in the pre-programmed cycle. If you selected a Cook Power other than HIGH, the COOK POWER Indicator Light will also come on. This shows you the oven is cooking at a selected Cook Power.
The Display counts down the ttme to show how much cooklng time is left
When Auto Set ends,”End” will show on the Display and 4 beeps will sound. [You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day

You can set COOK to follow Auto Set TIME, if desired. Touch in instructions for “Cooking in Your Microwave Oven:’ page 8; or “Cooking at Lower Cook Powers:’ page 9.

Changing the Pre-Programmed Setting

You can change the pre-programmed cooking time and Cook Power in Auto Set TIME to the time and power you most often use. To change the Auto Set TIME setting, follow these steps.
1. Place food in the oven and close the door.

2. Touch TIME twice.

3. Touch the Number Pads for the desired Step 6.
4. Touch COOK POWER.

cooking

time. If HIGH Cook Power is desired, skip to

5. Touch the Number Pad forthe desired Cook Power.

6. Touch START.The oven will cook at the new desired cooking time and Cook Power you

selected. After the cooking is complete, the oven will remember that time and Cook Power

for future use. NOTE: If the electric power ever goes off, the oven will go back to the

pre-programmed

2 minutes, 30 seconds at HIGH Cook Power setting.

12

Search

Auto Set TEMP
Auto Set TEMP provides ten preset probe temperaturesettings. One hundred ten (110)to one hundred ninety (190) degrees at 70% Cook Power can be set by touching TEMP and the corresponding Number Pad 1-9. This provides a short-cut method for setting commonly used probe temperatures. The Auto Set Chart included with your microwave oven and the Auto Set Guide on the inner door panel help you use TEMP to cook various food items without having to look up the temperature.
A preset temperature of 165 F at HIGH Cook Power is available after inserting the probe by touching just the TEMP Pad. This temperature may be changed to any temperature from 90 F to 200 F allowing you to store your favorite cooking temperature and Cook Power. See page 14 for instructions

DO THIS…

THIS HAPPENS…

1. Put food in the oven and
close the door.
2. Touch TEMP.
(Option: Skip to Step 6 if you want to use the preset temperature and Cook Power.)
3. Touch a Number Pad for the new temperature you want from 110°F to 190°F.

The AUTO SETIndicator Light will come on and the Display will show 165°F (or the temperature you have programmed as your favorite cycle).
The Display will show what you touched in degrees Fahrenheit. This example shows 140°F NOTE: Cook Power of 70% is preset on TEMP settings l-9.

4. Touch COOK POWER.
(Option: Skip to Step 6 if you want to cook at 70y0 power.)

The COOK POWER Indicator Ltght will come on and the Drsplay WIII show “P-70”

5. Touch a Number Pad for the Cook Power you want.

The Display WIII show what you touched This example shows you touched Number Pad 5 for 50°0 of full power

Search

continued on next page

6. Touch START.

The AUTO SETand PROBE TEMP Indicator Lights will stay on. The Display will show “COOL” to show the food is less than 9O’F. As the food cooks the Display will show the internal temperature of the food for every 5’F increase.

BE,fp BEEP

BEEP

When the probe senses the temperature you selected, the oven shuts off. “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the P door or by touching CANCEL.) “End” BEE WIII remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.

NOTE: You can set Auto Set TEMP to follow COOK. Auto Set TEMP can be programmed with the Temperature Probe out, but the oven will pause between the last Cook cycle and TEMP. “PROB” will show on the Display to remind you to plug in the Temperature Probe.

Changing the Pre-Programmed Setting

You can change the pre-programmed temperature and Cook Power in Auto Set TEMP to the temperature and power you most often use. To change the Auto Set TEMP setting, follow these steps:
1. Insert at least `/3 of the Temperature Probe into the food

2. Place food in the oven and close the door.

3. Touch TEMP twice

4. Touch the Number Pads for the new desired temperature between 90-F and 200 F If HIGH Cook Power is desired, skip to Step 6.

5. Touch COOK POWER.

6. Touch the Number Pad for the desired Cook Power

7. Touch START.The oven will cook to the new temperature at the Cook Power you

selected. After the cooking is complete, the oven will remember that temperature and

Cook Power for future use. NOTE: If the electric power goes off, the oven will go back

to the pre-programmed

165°F at HIGH Cook Power setting.

Additional Information
l Temperature may be changed after START is touched by touching TEMPthe new number and START.
l Auto Set TEMP will follow the Cook cycle if programmed. l “PROB” will show on the Display after START is touched if the probe is not plugged into the
oven. This will only appear when Auto Set TEMP has been selected alone, or between the last Cook cycle and Auto Set TEMP selection. l “Err” will show on the Display after START is touched if an Incorrect temperature has been selected (under 90°F or over 200-F). l See “Hints for Using the Temperature Probe” on page 19.

14

Search

Defrosting

.

UseQuick Defrostto thaw frozen food before cooking. Forsuggested defrost times,
— ILO 3, ,t~r. hnh;nA tha nvon r(nnr nr in yct lr MICRO MENUS * Cookbook.

DO THIS…

THIS HAPPENS…

1. Put frozen food in the oven and close the door.
2. Touch QUICK DEFROST.

The QUICK DEFROST Indicator Light will come on and the Display will show four 0’s.

3. Touch Number Pads for the defrosting time you want.
4. Touch START.

The Display will show the number you touched in the order you touched them. This example shows 2 minutes, 45 seconds.
The QUICK DEFROST Indicator Light will stay on to show that the oven is in the Quick Defrost cycle. The Display counts down the time to show how much defrosting time is IeH

When the defrost time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.
Standing Time
For best results, allow the food to stand for a while after defrosting. This helps equalize the temperature of the food to provide more even defrosting.
When COOK follows QUICK DEFROST,the oven automatically provides a standing time equal to the time touched in for QUICK DEFROST COOK will begin after the automatic standing time.

About the Quick Defrost Cycle

The microwave oven three equal parts:
First part Second part Third part

automatically

divides the time ser for the Quick Defrost cycle into
80% of full Cook Power 50% of full Cook Power 20% of full Cook Power

This automatic step-down in Cook Power helps defrost food quickly and completely.

Search

Changing or Adding Defrost Time
You can change the defrosting time any time before or after touching START.
l Touch QUICK DEFROST. 9 Touch numbers for new time . Touch START

Any new time setting made while Quick Defrost is operating will continue the defrosting at only 20% of full power.
The best time to change the setting is near the end of the Quick Defrost cycle.
l Open the door. l Check the food wrth long-tined fork, if center area is hard frozen, set additional time.
Remember that standing time is necessary to complete defrosting. l Close the door and touch STARTto continue the cycle if no additional time is needed
OR… l Touch in new instructions for additronal defrosting time

Cooking Automatically After Defrosting
The controls can be set so the microwave oven goes automatically Cook cycle you have touched in.

DO THIS…

THIS HAPPENS…

from defrosting to the

1. Put food in the oven and close
the door.
I.I!.!-!
2. Touch QUICK DEFROST.

The QUICK DEFROST Indicator Light will come on and the Display will show four 0’s.

3. Touch Number Pads for the defrosting time you want.

The Display will show the numbers you touched in the order you touched them. This example shows 4 minutes, 30 seconds.

4. Touch COOK.

The COOK Indicator Light will come on and the Display will show four O’s

5. Touch Number Pads for the cooking time you want.
16

The Display will show the numbers you touched in the order you touched them. This example shows 2 minutes, 30 seconds.

Search

6. Touch COOK POWER. (Option: Touch START if you want to use HIGH power.)
7. Touch a Number Pad for the Cook Power you want.
8. Touch START.

The COOK POWER Indicator Light Will come on and the Display will show
“P-HI:’ This shows the oven is preprogrammed to cook at full (HIGH] power.
The Display will show what you touched. This example shows you touched Number Pad 6 for 60% of full power.

d COdI QWtl

When you touch START,the QUICK DEFROST Indicator Light will stay on. All other Indicator Lights will go off. The Display counts down the time to show how much time is lett in the Quick Defrost cycle.
When the defrost time ends, the microwave oven automatically lets the food stand for the same amount of time used for defrosting. The QUICK DEFROST Indicator Light stays on and the Display counts down the standing time. During the countdown the oven will be dark, and the fan will be off.

BEEBPEEPWhen the standing time is over, you will hear 2 beeps and the Cook cycle will start.

The COOK Indicator Light will be on during the Cook cycle. The COOK POWER Indicator Light will also be on if you are using a Cook Power other than HIGH.

d COdI OWll

The Display counts down the time to show how much time is left In the second cycle
When the Cook cycle ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.

Search

Cooking with the Temperature Probe
The Temperature Probe helps take guesswork out of cooking roasts and larger casseroles. The probe is designed to turn off the oven when it senses the temperature you chose. See your MICRO MENUS * Cookbook for helpful information in cooking different types of food
nDO THIS… Plug’

1. Insert at least Y3
of the Temperature Probe into the food. (See page 20.)
DO THIS…
4. Touch PROBE TEMP.

2. Place food in the oven and plug the probe into the socket on the oven wall
THIS HAPPENS…

3. Make sure the probe does not touch any pati of the oven interior. Close the door.
The PROBE TEMP Indicator Light will come on and the Display will show “F.”

5. Touch Number Pads for the

desired final temperature

m`.between

90°F and 200°F.

6. Touch COOK POWER. (Option: Touch START if you want to use HIGH power.)

7. Touch the Number Pad for the Cook Power you want.

The Drsplay will show the numbers you touched in the order you touched them. This example shows a final cooked temperature of about 140 F
The COOK POWER Indicator Light will come on and the Display will show “P-HI” Thus shows the oven is preprogrammed to cook at full [HIGH] power.
The Display will show what you touched. This example shows you touched Number Pad 6 for 60% of full power.

18

Search

8. Touch START.

The PROBE TEMP and COOK POWER Indicator Lights will stay on.
The Display will show “COOL” to show the food is less than 90 F As the food cooks, the Display will show the internal temperature of the food for every 5 F increase.

When the probe senses the temperature you selected, the oven shuts off “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or bv touchina CANCEL.1 “End” will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.
NOTE: “Err” will be displayed after START is touched, if an incorrect temperature has been selected (under 90°F or over 200°F).

Hints for Using the Temperature Probe
DO…
l use hot pads when removing probe from food or food from oven.
l stir foods during cooking when recommended.

  • stir soups, casseroles and drinks before serving.
  • cover roasts with foil and let stand a few minutes after cooking. Remove foil if you detide to cook it longer.
    l remove the probe from the oven when not cooking by temperature.

DON’T…
l let probe or probe cable touch any pan of the oven interior.
. let probe touch foil (if used). Foil can be kept away from probe with wooden toothpicks. Remove foil if arcing occurs.
l use paper, plastrc wrap or plastic containers. They will be in the oven too long.

  • use probe in regular oven. l force probe into frozen food. l use probe for foods that need to simmer.

NOTE: Some foods are started using a timed (COOK) cycle and finished by using a temperature (PROBE TEMP) cycle. You can set PROBE TEMP to follow COOK, to avoid the need to reset the oven halfway through cooking. PROBE TEMP can be programmed with the Temperature Probe out. The oven will then pause between COOK and PROBE TEMP. “PROB” will show on the Display to remind you to plug in the probe. Touch START to continue cooking.

Search

Changing the Temperature Setting
l When ustng the Temperature Probe, PROBE TEMP settings can be changed before or during operation -Touch PROBE TEMP -Touch number for new temperature. -Touch START.The oven WIII continue cooking to the new temperature If the new temperature is lower than the temperature of the food, the oven will shut oft
remperature Probe Cooking Tips

For casseroles the ?IP of the probe should be Inthe centerofthefood Stir foods when recommended Replace the probe

For Ilqulds, balance the probe on a wooden spoon or spatula so the tip of the probe IS In the center of the liquid

For roasts the tip of the probe should be In the center of the largest muscle, but not touching fat or bone

l Casseroles cooked using the Temperature Probe should be made from precooked foods. Do not use raw meats, raw vegetables and cream sauces in casseroles.
l Dry casseroles do not work well. l Thaw frozen casseroles and meats in the microwave oven before inserting the probe.
9 If you are cooking individual servings such as mugs of soup, check the probe setting in several of the items – all the mugs may not heat at the same rate.
l Dry meat loaf mixtures don’t work well.
l Remember that roasts may vary in size, shape and composition. Use the timings for minutes per pound as a guide as well as the Temperature Probe.

Cleaning the Temperature Probe
1. Remove probe from microwave oven using hot pads. 2. Wipe probe with a hot soapy cloth. Use a plasttc scouring pad to remove
foods. 3. Probe may be placed in the silverware basket of the dishwasher,

stubborn

20

Search

Using KEEP WARM
Hot, cooked foods can be safely kept warm in your mlcrowave oven for up to 99 minutes, 99 seconds (about 1 hour, 40 minutes). KEEPWARM can be used by itself, or it can automatically follow a Cook cycle or PROBE TEMP cycle

DO THIS…

THIS HAPPENS…

1. Put cooked, hot food in
oven and close door.
2. Touch KEEP WARM.

The KEEPWARM Indicator Light will come on. The Display will show the time of duy.

3. Touch START.

The KEEPWARM Indicator Light will stay on. The oven light and the fan will come on. The Display will continue to show the time of day.

l KEEPWARM operates for up to 99 minutes, 99 seconds l Opening the oven door cancels KEEPWARM Close the door and touch KEEPWARM, then START
if additional KEEPWARM time IS desired
l Foods cooked covered should be covered during KEEPWARM l Pastry items [pies, turnovers, etc.) should be uncovered during KEEPWARM. l Complete meals kept warm on a dinner plate should be covered during KEEP WARM. . The use of more than one complete KEEPWARM (about 1 hour, 40 minutes] ISnot recommended
The quality of some foods will suffer with extended time

To Automatically Follow Another Cycle

l While you are touching touching START. OR…

in cooking

instructions,

touch KEEPWARM before

9 After the oven starts operating, touch KEEPWARM and then START.

l When the last cooking cycle is over you will hear 4 beeps The KEEPWARM Indicator Light will come on and the time of day will be displayed while the oven continues to run.

. KEEPWARM will follow AUTO SET,QUICK DEFROST,COOK or PROBE TEMP

Search

Other Operating Hints
4. To double check settings while the oven is running: l Touch the Command Pad forthe setting you want to check. The instruction programmed for that pad will show on the Display for 5 seconds. The Display returns to showing what the oven is doing.
2. To stop the oven while it is running: l Open the door. The oven will stop. Restart the oven by closing the door and touching START. l Touch CANCEL. All instructions will be erased. You must touch in new instructions.
3. If you touch two instructions into the same cycle, the second set of instructions will cancel the first.

22

Search

Bi-Level Cooking Rack

Use the metal Bi-Level Cooking Rack when cooking tn more than one container. The

metal rack can be turned upside-down to help fit taller containers on the bottom

of the oven. See the MICRO MENUPCookbook

provided with your oven.

Second Position

Note: Do not store the metal rack in the oven. Arcing and damage to the oven can result if someone accidentally starts the oven.

Inserting the Rack
l Insert the rack securely into the rack supports on the side walls of the oven [first position].
l Turn rack upside-down when using a taller container on the bottom of the oven (second position).
l Do not operate the oven with the metal rack stored on the floor of the oven. Damage to the interior finish will result.
Cleaning the Rack
. Wash by hand with a mild detergent and a soft or nylon scrub brush. Dry completely.
l Do not use abrasive scrubbers or cleansers.

Special Caution
l Do use hot pads when removing rack from oven after cooking. It may be hot.
l Do put food in containers, then place containers on rack.
l Do use only when cooking foods in more than one container,
l Do use only In the microwave oven l Do not use with browning dish. l Do not let food containertouch the too
or side of the oven. . Do not store rack in oven. l Do not cook foods directly on rack
without putting them in containers first

Search

Installation instructions
BEFORE YOU BEGIN, READ THE FOLLOWING INSTRUCTIONS COMPLETELY AND CAREFULLY.
Installing Your Microwave Oven

1. Empty the mrcrowave oven and clean inside it with a soft damp cloth. Check for damage such as misaligned door, damage around the door or dents inside the oven or on the exterior. If there is any damage, please do not operate the unit until it has been checked by an authorized Whirlpool service technician and any repairs made.

2. Put the oven on a ca? counter, table or shelf that is strong enough to hold the oven, the food and the utensils you put in it. (The control side of the unit is the heavy side. Use care when handling.) The weight of the oven is approximately 60 Ibs. (27 kg).

3. Do not block the vent opening at the front of the oven or the air intake opening on the bottom of the oven. Blocking vent or air intake openings can cause poor cooking results.
Make sure the microwave oven legs are in place. Do not set the oven on anything that will block the air intake openings.

4. Do not install the oven next to a conventional surface unit or in any area where excessive heat and steam are generated. This could damage the outside of the cabinet.

24

Search

5. Electrical requirements
Observe all governing codes and ordinances. A 120 Volt, 60 Hz., AC only15 or 20 amp fused electrical supply is required. (Timedelay fuse is recommended.) It is recommended that a separate circuit serving only this appliance be provided.
6. GROUNDING INSTRUCTIONS

7. For your personal safety, this appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing anescape wirefortheelectric current. This appliance is equipped with a
3-PRONG GROUNDING TYPE WALL RECEPTACLE
GROUNDING PLUG
polarized 3-prong grounding plug. It must be plugged into a correct polarized mating 3prong grounding type wall receptacle, properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available or if you are not sure if the

wall receptacle larized, have electrician.

is properly grounded and poit checked by a qualified

It is the personal responsibility and obligation of the customer to have a properly grounded and correctly polarized J-prong wall receptacle in-

stalled by a qualified electrician.

Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

It is NOT recommended to use an extension

cord with your microwave oven, but if you find

it necessary to do so temporarily

(until a

properly grounded and polarized 3-prong receptacle is installed], use only a heavy

duty UL listed 3-wire grounding type extension cord containing three 16-gauge (mini-

mum) copper wires. It must not be longer than 10 feet (cords longer than 10 feet may affect the

cooking performance

of your microwave

oven]. The plug on the extension cord must fit into a 3-prong grounding type wall receptacle (as shown on this page) and the receptacle end of the extension cord must accept the 3prong grounding plug of the microwave oven,

8. To test the oven, plug it into the
proper electrical outlet and put about one CUD (250 ml] of cold water in a glass container In the oven. Close the, door, Make-sure it latches. Follow the directions on page 8 to set the oven to COOK for 1% minutes, When the time is up, the water should be heated.

9. This microwave oven is designed for use in the household only and must not be used for commercial p. urpo. ses.
DO NOT remove the outer case, door, or con-
trOl panel at any time. The unit is equipped with high voltage and should not be serviced unless bv an authorized WhirlDool trained service technician

SAW THESE INSTRUCTIONS

Search

25

Building in Your Microwave Oven

Your microwave oven is not limited to carts, counters or tables. Custom installations are made easy with kits available from your dealer.

1. Build the microwave oven into a cabinet or
wall by itself or over built-in single ovens in the Whirlpool RDE, REE,RGE, RB and SB model series.
2. Attach the mlcrowave oven to a wall by itself or with cabinets over it.
3. Put the mlcrowave oven on the MICRO SHELF Hood over a cooktop. The hood is available ducted or as a recirculating hood, and includes cooktop lights.

Ask your dealer for details on l 832987 – 30-inch Built-in Kit l 832989 -24-inch Built-in Kit .l 883322999931 -_ 2W7a-ilnl chMouBnutiinltg-in KKiitt
l RH3330XR – MICRO SHELF’ Hood
Use only approved installation kits. Obtain these kits from your authorized Whirlpool dealer.

Caring for your microwave oven
Cleaning the Microwave Oven

Wipe otten with warm soapy water and a soft cloth or sponge

For stubborn solI, boil a cup of water In the oven for 2 or 3 minutes Steam will sonen the soil

CAUTION:
Abrasive cleansers, steel wool pads, gritty wash cloths, etc., can damage the control panel, and the interior and exterior oven surfaces. Use a soft cloth or a sponge with a mild detergent or spray glass cleaner.

Be sure to keep the areas clean where the door and oven frame touch when closed. Use only mild, nonabrasive soaps or detergents applied with a sponge or soft cloth when cleaning surfaces of door and oven that come together. Rinse well.

Replacing the Light Bulb

The microwave To replace:

oven light should come on whenever the door is opened or the oven is operating Light Bulb Mode Mixer Cover

2. Open the oven door.

3. Remove the 3 screws from the front of the cover.

4. Pull down the front portion of the cover. (It is creased across its width to form a hinge.]

5. Remove and replace the 25watt can-

delabra-base

bulb (Part No. 313969). Obtain

bulb from your authorized Whirlpool dealer.

6. Close the cover and replace the screws.

7. Plug in, or Turn on the main power supply.

26

Search

How your microwave oven works

Microwave ovens are safe Microwave energy IS not hot It causes food to make Its own heat, and it’s this heat that cooks the food.

Mode Mixer

Magnetron

Ceramic

Bottom

Mrcrowaves are like TV waves or light waves You can’t see them, but you can see what they do

A magnetron In the mrcrowave oven produces mtcrowaves The microwaves move into the oven where they are scattered or sttrred by a mode mixer [like a fan] Microwaves bounce off metal oven walls and are absorbed by food

Metal’Floor
The ceramic bottom of your microwave oven lets mrcrowaves through. Then they bounce off a metal floor, back through the ceramic bottom and are absorbed by the food

Microwaves pass through glass, paper and plastic without heating them so food absorbs the energy Microwaves bounce off metal pans so food does not absorb the energy

Microwaves may not reach the center of a roast The heat around the outside IS what cooks the roast all the way through This IS one of the reasons for letting some foods (roasts, baked potatoes] stand for a while after cocking, or for stirring some foods during the cooktng time

The microwaves disturb water molecules in the food. As the molecules bounce around bumping into each other, heat is made, like rubbing your hands together. This is the heat that cooks.

Search

Operating safety precautions

NEVER COOK OR REHEAT A WHOLE EGG.
Steam build-up in whole eggs may cause them to burst and burn you, and possibly damage the oven. Slice hard boiled eggs before heating. In rare instances, poached eggs have been known to explode. Cover poached eggs and allow a standing time of one minute before cutting into them.
USE HOT PADS. Microwave
energy does not heat containers, but the hot food does.

Liquids heated in certain

containers (especially

cylindrical-shaped

containers)

may become overheated. The

liquid may splash out with a

loud noise during or after

heating or when adding

Ingredients (coffee, etc.]

resulting in harm to the oven

and possible personal injury.

For best results stir any

liquid several times before

heating or reheating.

NEVER lean on the door or
allow a child to swing on it when the door is open. Injury could result.

DO NOT heat, store or
use flammable, inflammable or corrosive materials in or near the oven.

DO NOT can foods in the
oven. Closed glass jars may explode resulting in damage to the oven or possible personal injury.
DO NOT use the oven to
sterilize objects (baby bottles, etc.). It is difficult to maintain the high temperature required for safe sterilization.

28

Search

r-

-.

CAUTION: DO NOT use the oven until you have read and understand ALL precautions to

prevent damage to the oven.

L

.___

DO NOT use the oven for
storage. Do not leave paper products, books or cooking utensils in the oven when not in use. Fire may result if someone accidentally starts the oven Don’t let any-thing touch the top of the oven.

DO NOT OVERCOOK POTATOES. Fire could result.
At the end of the recommended cooking time they should be slightly firm. Wrap in foil and set aside for 5 minutes. They will finish cooking while standing.

I

1

If a fire should start in the oven cavity:

l keep door closed

l turn oven off

l disconnect the power supply at the cord, fuse box or circuit breaker.

Use of unsuitable containers for popping corn could result in fire or damage to the oven. Make popcorn only in poppers designed for use in microwave ovens. Follow directions supplied with the popper. Results are the manufacturer’s responsibility.

Starting a microwave oven when it’s empty is not recommended. If you experiment, put a container of water in the oven.
It is normal for the inside of the oven door to look wavy after the oven has been running for a while.

DO NOT use newspaper or
other printed paper in the oven. Fire could result.
DO NOT dry flowers, fruit.
herbs, wood, paper, gourds or clothes in the oven. Fire or other hazards may result.

General information
FUSEBOX

DO NOT try to melt
paraffin wax in the oven. fire or other hazards may result.

If your electric power line or outlet voltage is less than normal 120 volts, cooking times may be longer.

Search

To test a dish for safe use, put it into the oven with a cup of water beside it Cook on HIGH Cook Power for one minute. If the dish gets hot and water stays cool, do not use it.
29

If you need service or assistance, we suggest you follow these four steps:

1. Before calling for assistance…

Performance problems often result from lrttle things you can find and fix yourself without tools of any kind
If nothing operates: l Is the power supply cord plugged into a live
circuit with the propervoltage? [See page 25.)
l Have you checked your home’s main fuse or circuit breaker box?
l Have you checked the electric company for a power failure?
If the microwave oven will not run:
l Is the oven being used as a timer?
l If the Temperature Probe is being used, IS it plugged tightly into its socket?
l Is the door firmly closed and latched?
l Did you touch START?
l Did you follow the directions exactly?

If the microwave long:

cooking times seem too

l Is the electnc supply to your home or wall outlet low or lower than normal? Your electric company can tell you if the line voltage is low. Your electrician or service technician can tell you if the outlet voltage is low.

l Is the Cook Power at the recommended setting?

l Are you allowing for more time when cooking more food at one time?

If the Display shows a time counting down but the oven is not cooking:
l Is the Minute Timer in use?
l Is the oven door closed completely?
l Is the oven In standing time between QUICK DEFROST and COOK or Auto Set TIME? [See page 15.)

If you do not hear a programming tone (page 61: l Is the command correct? l Has the tone been cancelled?
If the fan seems to be running slower than usual: l Has the oven been stored in a cold area? The
fan will run slower until the oven warms up to normal room temperature.
If there has been a power interruption, the Display will show 88:88. Reset the Clock (page 91.
If the microwave oven turns off too soon or not soon enough when using the Temperature Probe: l Is at least `13 of the probe in the food? l Is the probe tip in the center of the food? . Is the probe touching bone or fat? l Have you allowed roasts to stand for a few
minutes after cooking? l Is the probe plugged tightly into its socket? l Is the Cook Power set correctly? l Is the probe temperature set correctly?
2. If you need
assistance?..
Call Whirlpool COOL-LINE” service assistance telephone number. Dial free from anywhere in the U.S.:
1-800-253-1301 and talk with one of our trained consultants. The consultants can instruct you in how to obtain satisfactory operation from your appliance or, if service is necessary, recommend a qualified service company in your area.

30

Search

3. If you need service*…

Whirlpool has a na-

tionwide network of

franchised TECH-

CARE ‘ service Com-

panies. TECH-CARE

service techni-

cians are trained to

fulfill the product

FRANCHISED SERVICE

warranty and pro-

vide after-warranty

service, anywhere In the United States. To locate

TECH-CARE service In your area, call our COOL-

LINE service assistance telephone number (see

Step 2) or look in your telephone directory

Yellow Pages under

APPLIANCES-HOUSEHOLD-

MAJOR-SERVICE

8 REPAIR

,”,i tiLPUl” Ar’iL,PluC+

,Chl b ;L-. -t:t

DRkSF.

t

ELECTRICAL APPLIANCESMAJOR REPAIRING 8 PARTS
OR h~lbLP’.hL APwANCt? <PNCHI5I3 TECH IARt >iRU /

4. If you have a problem?..
Call our COOL-LINE service assistance telephone number (see Step 2) and talk with one of our consultants, or if you prefer, write to:
Mr. Donald Skinner Director of Customer Relations Whirlpool Corporation 2000 M-63 Benton Harbor, MI 49022

  • If you must call or write, please provide: model number, serial number, date of purchase, and a complete description of the problem. This information is needed in order to better respond to your request for assistance.

WASHIN MACHINES DRYERS 8 IRONERS-SERVICING

Search

WHIRLPOOL” MICROWAW OVEN
WARRANTY

MWOOI

LENGTH OF WARRANTY
FULL ONE-YEAR WARRANTY From Date of Purchase
LIMITED FOUR-YEAR WARRANTY Second Through Fifth Year From Date of Purchase
LIMITED NINE-YEAR WARRANTY Second Through Tenth Year From Date of Purchase

1 WHIRLPOOL WILL PAY FOR
FSP'”‘ replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by a franchisee TECH-CARE” service company.
FSP replacement parts for solid-state touch control system if defectiw in materials or workmanship. (Touch Control models only.) The solidstate touch control parts are shown below.
FSP replacement magnetron tube if defective in materials or workmanship. The magnetron is shown below.

WHIRLPOOL WILL NOT PAY FOR

A. Service calls to: 1. Correct the installation of the microwave product. 2. Instruct You how to use the microwave product. 3. Replace house fuses or correct house wiring. 4. Replace owner accessible light bulbs.
6. Repairs when microwave product is used in otherthan normal, single-family household use. C. Pick up and delivery. This product is designed to be repaired in the home. D. Damage to microwave product caused by accident, misuse, fire, flood, acts of God or use of products
not approved by Whirlpool. E. Any labor costs during the limited warranties.

WHiRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages so this limitation or exclusion may not apply to you. This WarrarItY gives You specific legal rights, and You may also have other rights which vary from state to state.
Outside the United States, a different warrantY may apply. For details, please contact Your franchised Whirlpool distributor or military exchange.

SOLID-STATE TOUCH CONTROL
PARTS AND FEATURES COVERED BY YOUR WARRANTY

Part No. 3148796 01988 Whirlpool Corporation

Search

Printed in USA

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Whirlpool User Manuals

Related Manuals