Zhongshan Xiaolanzhen Xiaoshidai Lighting XSD-DD15 USB Power Supply Instructions
- May 15, 2024
- Zhongshan Xiaolanzhen Xiaoshidai Lighting
Table of Contents
Instructions
XSD-DD15 USB Power Supply
This product uses USB power supply. After turning on the bracket and fixing
the lamp. you can connect the USB cable to the power supply with USB interface
(such as computer, mobile phone charger, Power Bank . USB socket. etc.). After
power on, the light will be on, and the default is 7 color cycle change
colour.
Three Control mode:
- Bulton on the lamp: press once to switch a luminous mode. and press for 3 seconds to turn it on or off.
- Remote control: use the infrared remote control to press the required function key to control the lamp.
Remote controllers of different sizes will be provided according to different packaging boxes. - App control: after downloading the App from the mobile phone, turn on the Bluetooth function of the mobile phone and turn on miracles star .
Scan Code and download App:
Miracles.Star
http://www.qrtransfer.com/MiraclesStar.html
0/1 in the upper left corner is the Bluetooth connection, 0 is not connected
and can be connected manually. 1 is already connected.
The hexagonal symbol in the upper right corner is the debugging color
sequence, usually RGB.
If the color controlled is different from the actual, you can change other
sequences.
In the color matching interface, click the LED Quantity setting, enter 24 and
confirm the desktop model(SOCM), and enter 60 and confirm the floor lamp
model(110CM).
The above steps are necessary for multiple lights to change color
synchronously
In the mode interface: there are dozens of luminous colors and dynamics for
you to choose from, and the speed and brightness can also be adjusted.
In microphone mode: you can change color according to the rhythm of ambient
sound, and also select different modes and sensitivity.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>