PHILIPS BN021C Ledinaire Bat Instructions
- June 16, 2024
- Philips
Table of Contents
PHILIPS BN021C Ledinaire Bat Instructions
⚠
– The luminaire shall be installed by a qualified electrician and wired in
accordance with the latest
– LED board & LED driver are not serviceable and not replaceable.
– The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
– Luminaire must not be used or stored in corrosive environment where
hazardous materials such as sulphur, chlorine, phthalates, etc. are present. –
If the external flexible cable or cord of this luminaire is damaged, it shall
be replaced by a special cord or cord exclusively available from the
manufacturer or his service agent.
ATTENTON OBSSEVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICS
© 03/2021 Signify Holding. All rights reserved. This document contains
information relating to the product portfolio of Signify which information may
be subject to change. No representation or warranty as to the accuracy or
completeness of the information included herein is given and any liability for
any action in reliance thereon is disclaimed. The information presented in
this document is not intended as any commercial o er and does not form part of
any quotation or contract. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.. All other trademarks are
owned by Signify Holding or their respective owners.
Signify Holding. The Netherlands
This product contains a light source of energy efficiency class: see table or label.
If this luminaire contains an external flexible cable, it shall only be replaced by the manufacturer or his service agent or a similar qualified person. The light source and/or control gear contained in this luminaire are not replaceable, in case of damage replace the luminaire.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>