PHILIPS 55PFL5907 LED TV User Guide

**PHILIPS 55PFL5907 LED TV User Guide

**

Connect external devices

Connectivity at a glance

1. HDMI 1 (HDMI-DVI) + PC Audio
2. HDMI 2
3. HDMI 3
4. HDMI 4
5. Component Video + Audio L/R
6. Composite Video + Audio
7. VGA

Network setup

Wired

Please connect a live Ethernet cable from your network provisioning equipment to the back / side of this TV before proceeding with the setup below

1. Press , select Setup

2. Select Installation, then Network

3. Select Network settings assistant, then Start now.

4. Select Wireless, follow the steps below

5. Select Easy Connect if your router has Wi-Fi Protected Setup (WPS) with its button.

6. Press WPS button first within 2 minutes

Select the desired network. If the network with icon is selected, enter the security code. See page 12 on the manual.

7. Your TV requires software updates once in a while for performance and feature enhancements. Auto update announcement will pop up when new firmware version is detected.

8. Please verify your settings and try again. Refer to page 12 of the manual for detailed instructions.

Wireless

Please make a note of the name of your wireless network, its security type and security code before proceeding with the setup 6b In the process below, use either 6a or 6b.

Press OK to exit

Enjoy your Net TV!

Network service icons may differ according to country you set. VUDU can only be viewed in the USA and Netfl ix (version 3.1) equipped with this unit is applicable in the USA and Canada only

What’s in the box

Mount base onto TV

Connect the power and antenna or cable

Control panel

1. (POWER / STANDBY: Touch to turn the unit On and go into Standby mode. To completely turn Off the unit, you must unplug the AC power cord .
2. CH + / − :  Touch to select channels or to move up ( +) / down ( −) when selecting menu items.
3. SOURCE: Toggle to select connected devices
4. VOLUME + / −: Press to adjust volume down (−) / up (+) or to move left (−) / right (+) when selecting menu items
5. Ambient light sensor: Alters the brightness of the TV screen automatically by detecting your room lighting level. Do not block the light sensor allowing it to work properly
6. Power On indicator: Lights up white when the unit is turned On and fl ashes while the unit is turning On
7. Infrared sensor : Receives IR signals from remote control.

Using the remote control

1. (POWER-ON / STANDBY-ON

2. VUDU Access to VUDU directly

3. Easy Link(HDMI CEC) buttons Functionally useful for EasyLink(HDMI CEC), net service and DLNA.

4. FORMAT Selects a picture format.

5. (MENU button botones de MENU boutons de MENU) Access to menu

6. INFO Displays information about the TV channel or accessory device.

7. OK

8. (NAVIGATION buttons

9. OPTIONS
   Displays a list of menu items applicable to the highlighted object or screen

10. (PREV. CH button

11. CH +/−

12. l +/− (VOLUME

13. Apps (App1/App2/App3/App4) buttons Works as direct access to user specifi ed net apps

14. 0 − 9 (NUMBER buttons

15. SLEEP

16. (MUTE

17. BACK
    Go back to previous menu or screen

18. NET TV

19. SOURCE
    Toggle and select connected devices

20. NETFLIX
    Access to Netfl ix directly

First time setup

Follow the on-screen instructions to complete your TV setup.

Philips Wireless MediaConnect

Get the software fi rst!

1. Make a note of the MediaConnect code
   Press , then use ▲▼◄► to select Setup > Software > MediaConnect code.

   • Write down the 12-digit code displayed on the screen. You will need this to download MediaConnect software.
   • 2. Visit our web site at

2. Download
   Enter the 12 digit code you wrote at step 1 and download the Media Connect software.

3. Install
   Once downloaded, run the fi le ‘Philips Wireless MediaConnect_setup.exe’. Follow the instructions on
   your PC to complete installation

PC and Network Requireme

Supported OS

• Windows XP, Windows Vista, Windows 7,
• Mac OS X 10.5 or above (PC only)

Minimum requirements

• Intel Core 2 Duo 1.8GHz
• 512MB RAM
• IEEE 802.11n (PC & Wireless Router)

Recommended requirements

• Intel Core 2 Duo 2.1GHz
• 1GB RAM

Connection overview

Caution

Disconnect the AC power cord before connecting devices.

Note for USB terminal

The software upgrade is, in most cases, handled by an authorized service person or in some circumstances the user may be asked to do the software upgrade themselves.

If you need to upgrade the software, please visit www.philips.com/support

For HDMI 1 only

In addition to normal HDMI functionality, outputs TV audio to an HDMI ARC- compliant device, such as a
home theater system.

For complete instructions, please visit www.philips.com/support to download the full version of the User Manual.

Philips and Philips Shield are used under license of Reckoning Philips Electronics N.V.
www.philips.com/support

References

• Philips Customer Service Support - Home | Philips
• Support Home | Philips
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>