Yamaha Audio

Yamaha Audio NSAW350W Outdoor 2-Way Speakers

CONSUMER PRECAUTIONS

Read these precautions carefully before operating your NS-AW350 / NS-AW350W speakers.

• When installing these speakers outdoors, try to minimize their exposure to rain and snow by mounting the speaker in corners or under eaves.
• Since these speakers can be wall mounted, it is essential that they are firmly secured. Be sure to consult a reliable source about the best type of hanger for your particular wall’s construction. Secure installation is the purchaser’s responsibility.
• Do not attach them to thin plywood or soft wall surface materials as the screws may tear free, causing the speakers to fall and be damaged, or result in personal injury.
• Do not fasten the speakers to walls with nails, adhesives, or other unsafe hardware. Long-term use and vibrations may cause them to pull free.
• Do not place the speakers where they are liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance.
• Placing the speakers on the same stand or shelf as a turntable can result in feedback.
• Never touch the woofer or tweeter units with your hands or expose them to excessive physical shock. If they are dented or bent, the sound will be distorted.
• Lower the power amplifier/ receiver volume control before changing input sources. Never change input sources (for example, FM to CD) at high listening levels. Always turn the receiver/ amplifier unit off when installing or removing input cables.
• Anytime you note distortion, reduce the volume control on your power amplifier/ receiver to a lower setting. Never allow your power amplifier to be driven into “clipping”.
• Do not attempt to clean the speakers with chemical solvents as this might damage the finish. To clean wipe with a dry, soft cloth.
• Secure placement or installation is the owner’s responsibility.YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers.

UNPACKING

After unpacking, inspect the contents to confirm the following items are contained:

MOUNTING THE SPEAKERS

The speakers can be placed on a bookshelf or wall/ceiling mounted with optional speaker brackets using 1/4×20 screws to fasten the optional bracket into the threaded inserts located on the back of the speakers. To wall / ceiling mount the speakers, use the supplied mounting bracket.

OUTDOOR NOTE

The supplied mounting brackets allow the speakers to be mounted in corners or under eaves to minimize their exposure to rain or snow.

1. Use the bracket as a template mark the locations of the key hole slots on the mounting area.
2. Next,using appropriate hardware (not included) securely fasten the bracket to the wall/ceiling.
3. Position the speaker in the bracket and secure the speaker by using the two large bracket screws included

If the mega mounting plate is already installed on the outside wall, the speaker can also be mounted using the following procedure:

CAUTION: Be sure to consult a reliable source for the best type of fasteners for your particular wall / ceiling construction. Secure installation is the purchaser’s responsibility.

When using speaker brackets to mount the speaker on a wall, please use safety wire between the speaker and the bracket to prevent the speaker from falling.

1. Insert the clasp of the safety wire through the brackrt and loop.
2. Attach the L-bracket to the speaker with screw.

When mounting the speakers vertically or horizontally, attach the base or side knobs to the speakers according to the selected position.

Vertical Placement

Horizontal Placement

CONNECTIONS TO YOUR AMPLIFIER

Before making connections, make sure that the amplifier is switched off.

CONNECTIONS

• Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with the provided speaker cables.
• One side of the speaker cable is red and the other side is black. Connect the (+) terminals on the amplifier (or receiver) and speakers using the red side. Connect the (-) terminals on both components using the black side of the cable.
• Connect each speaker making sure not to reverse the polarity ( +, -) . If the speaker is connected with reversed polarity.the sound will be unnatural and lack bass.

How to connect

1. Loosen the knob.
2. Insert the bare wire. (Remove the insulation coating at the extremity of each speaker cable by twisting the coating off.)
3. Tighten the knob and secure the cable. Test the firmness of the connection by pulling lightly on the cable at the terminal.

Note

Do not let the bare speaker wires touch each other as this could damage the speaker or amplifier, or both.

When using a banana plug

1. Tighten the terminal knob.
2. Insert the banana plug into the terminal.

SETTING UP THE SPEAKERS

INDOOR PLACEMENT This speaker is designed to be used as a main, surround or effects speaker. Main speaker placement should be separated by a distance of 6-1 Oft. If they are placed too close together, there will be a reduction in the stereo effect. Conversely, If placed too for apart, the so called “middle-omission” effect will occur and the vocal center fill will be lost. Heigh of the speaker should be at least at ear level. Center channel speakers should be placed centered above or below the TV. Surround speakers should ideally be placed behind the listening area, at least as far apart as the main speakers and up to 2 additional feet apart per side. The height of the speaker should be at a minimum of ear level or preferably somewhat higher.

OUTDOOR PLACEMENT

Your speaker system has water-resistant enclosures that protect the speakers form the elements when mounted outdoors.These speakers are designed with a wide dispersion pattern which means you will get good sound quality over a large listening area. (100 ft2 to approximately 400 ft2).Please note: If the listening area is too large, and the speakers are positioned too far apart ,”middle-omission” effect

• (lack of sound in an area between the speakers) will occur and/or “hot spots”
• (loud sound near the speaker) will develop.

Try to place the speakers between 6’~10′ apart for good stereo listening. It is suggested for larger areas (over 400 ft2 to about 600 ft2) two pairs of speakers are used, see below.

NOTE:

1 pair of speakers should be used for every 200-400 ft.

SPECIFICATIONS

• …………………………. ……………………………………………………………………………. ….. NS-AW350 / NS-AW350W
• Type ………………………………………………………………………………………………………………. 2 Way Acoustic Suspension
• Speaker Woofer ……………………………………… 6-1/2″ High Compliance P.P Mica Filled Cone and Rubber Surround
• …………………………………………………………………………………………………………………. 1″ PEI Dome
• Frequency Response ………………………………………………………………………………………………. 45Hz to 40kHz (87dB)
• Impedance …………………………………………………………………………………………………………………………………. 6 Ohms
• Nominal input. …………………………………………………………………………………………………………………………… .40 watts
• Maximum input. ………………………………………………………………………………………………………………………… 130 watts
• Sensitivity(dB/2.83V, 1 m) …………………………………………………………………………………………………………………. 87 dB
• Dimension(HxWx0) ………………………………………………………………………………………………. 7-7’32″x 13-15’32″x 8-¼”
• ……………………………………………………………………………………………………………………….. 6.39 Lb(102.3 oz)

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CA 90620 • MAILADDRESS:R .O.BOX 6660, BUENA PARK, CA90622

Yamaha Loudspeakers are designed and manufactured to provide a high level of trouble-free performance. Yamaha Electronics Corporation, USA, is proud of the experienced craftsmanship that goes into each and every Yamaha Loudspeaker. Yamaha sells its Loudspeakers only through a network of high quality, specially authorized dealers and is pleased to offer the following Limited Warranty, which applies only to products purchased from our authorized dealers. We suggest that you read the Limited Warranty thoroughly, and invite you to contact your authorized Yamaha dealer or the Yamaha Electronics Corporation, USA, service department if you have any questions.

LIMITED WARRANTY

INDOOR/ OUTDOOR SPEAKER SYSTEM

Duration of Warrany:

This Speaker System is covered by this warranty for a period of two (2) years beginning from the date of first consumer purchase.

What is covered and What is Not Covered?

This warranty covers all defects in materials or workmanship in this product, but DOES NOT COVER the following:

1. Damage, deterioration or malfunction resulting from:
2. Accident, negligence, misuse, abuse, improper installation or operation or failure to follow instructions contained in your Owner’s manual.
3. Any shipment of the product. (Claims must be presented to the carrier.)
4. Repair or attempted repair by anyone other than Yamaha or an authorized Yamaha Preferred Customer Service Center.
5. Any unit which has been altered or on which the serial number has been defaced, modified or removed.
6. Normal wear and any periodic maintenance.
7. Any unit which has not been purchased from an authorized YAMAHA dealer in the U.S.A. If you are uncertain as to whether a dealer has been authorized by YAMAHA, please contact YAMAHA’S Service Department.
8. Any unit used for industrial or commercial purposes.

Who may enforce the warranty?

This waranty is enforceable only by the original purchaser.

What we will pay for and what you must pay for:

YAMAHA will repair or replace units covered by this warranty, without charge to the consumer for labor or materials. YOU ARE RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL CHARGES AND FOR ANY INITIAL SHIPPING CHARGES. if the Components must be shipped for warranty ser­vice. However, we will pay the return shipping charges to any destination within the U.S.A. if the repairs are covered by the warranty.

How you can get Warranty Service

1. YAMAHA Speaker Systems requiring service must be delivered to any authorized YAMAHA Service Center within the fifty states of the U.S.A., the District of Columbia or Puerto Rico. Warranty service is not available at any other location or outside the U.S.A.
2. Units shipped for service should be packed securely and must be accompanied by a detailed explanation of the problem(s) requiring service And Bill of Sale as proof of Warranty coverage.
3. Warranty registration is not required for Warranty coverage.

Limitation of Implied Warranties:

ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMTED IN DURATION TO THE LENGTH OF THIS WARRANTY.

Exclusion of Damages

YAMAHA’S LIABILITY, FOR ANY DEFECTIVE PRODUCT, IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT OUR OPTION. YAMAHA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR DAMAGES OF ANY OTHER KIND OR CHARACTER BECAUSE OF PRODUCT DEFECTS.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

For the nearest authorized YAMAHA Preferred Customer Service Center please call:

1-800-4-YAMAHA

Should you have any questions about service received or if you need assistance in locating an authorized Yamaha Service Center, please contact:

YAMAHA

SERVICE DEPARTMENT

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE BUENA PARK, CA 90620

MAILADDRESS: R.O.BOX 6660, BUENA PARK. CA90622

YAMAHA Website Address-http://www.yamaha.com
Phone: (714)522-9105

YAMAHA products are backed by a nationwide network of high quality YAMAHA authorized Service Centers, providing prompt, courteous and professional service.

Frequently Asked Questions

Yamaha outdoor speakers are water-resistant.

Overview of the Yamaha NS-AW350
Yamaha’s NS-AW350 Outdoor Speakers (Pair, Black) deliver superb sound wherever you install them and are equally at home indoors or out. The speakers have cabinets that are drip-, water-, and UV-resistant in order to withstand Mother Nature’s elements.

How can I improve the sound quality of my outdoor speakers?

Since outdoor speakers project sound into a wide area, it’s crucial to employ amplifiers to support them, especially when it comes to bass output, where the effects are immediately audible. Basically, the quality of your outdoor audio will increase with the amount of power you give your outdoor speakers.

How are outdoor speakers safeguarded?

Keep outside speakers away from water and sunshine for their protection.
In inclement weather, when it is impractical to bring them inside, cover them.
Inspect mounting hardware frequently.

Regularly inspect the wiring.

Always keep your speakers clean.

Are outdoor speakers waterproof?

Although they are designed expressly to withstand the elements, weatherproof speakers are only water resistant, not waterproof. Weatherproof speakers should be fine when exposed to moisture, steam, rain, or sprinklers. But keeping them protected will make them live longer.

How is an outdoor speaker grill cleaned?

Shut off the speakers. If you can, take the speaker grills off.
To get rid of the grill’s dust, vacuum it.
Put on a mask for your face.
Dust off the white powder by lightly brushing it with the dry cleaning spray cap’s built-in brush. Swap out the screws and grill (if any).

Can outdoor speakers be left on in the winter?

Generally speaking, as long as they aren’t in contact with moisture, you can leave them in the cold. It would be great if you constructed some sort of shelter for outside speakers that are permanently installed to shield them from the elements. Your speakers won’t suffer permanent harm from the cold alone.

How do you keep the rain from damaging your PA speakers?

I’d propose using gaffer tape to secure umbrellas as one possibility. The speakers themselves seem like a nice idea if there isn’t anything else available because you’ll need to tie or glue the umbrellas on to something sturdy because regular mic stands would likely fly away if there was any wind.

Is Yamaha a quality audio system?

When it comes to the manufacture of premium musical instruments and audio equipment, Yamaha is a well-known and reputable brand. Despite being around for a while, Yamaha continues to hold the top spot as the industry-leading producer of top-notch speakers and other musical and audio equipment.

What height is ideal for outdoor speakers?

10 feet
They will project sound farther if you put them higher, but the sound will thin out as a result. For any placement, we advise keeping speakers at a distance of under ten feet. Install the loudspeakers with a small downward tilt if you must place them in an exposed location to aid with drainage.

How are outdoor speakers made waterproof?

Applying a high gloss polymer finish to your speakers is the quickest and least expensive way to weatherproof them. Usually, a polymer varnish or a polyurethane spray is used as the coating; however, the polyurethane spray is only utilitarian and has no aesthetic value.

Video

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>