TRADITIONAL BEAMS Steel Bracket Instructions
- June 3, 2024
- TRADITIONAL BEAMS
Table of Contents
TRADITIONAL BEAMS Steel Bracket
Fitting Instructions
Fixings supplied with our steel bracket rustic pine floating shelves. Available for both solid walls and plasterboard walls*.
YOU WILL NEED
- Mark out where you would like your brackets to sit on your wall making sure the markings are level with a spirit level.
- Drill the wall deep enough to accept the wall plugs or GripIt fixings using an 8mm drill bit for solid walls or a 20mm spade bit for plasterboard walls.
- Insert the wall plugs into the 4 holes and use a hammer to tap the wall plugs flush with your wall.
- Insert a grip it fixing into each hole and tap with a hammer so its flush with your wall. Use a flat head screwdriver to turn the cam and open the wings for super grip strength.
- Line up the steel brackets with the wall plugs or grip it fixings and use a screw driver or a drill to screw in the appropriate fixings into position.
- Place the pine shelf on top of the brackets and screw down for extra support in to the upwards facing holes.
Traditional Beams Ltd The Warren Workshop, Margrove Park, Boosbeck, Saltburn- by-the-sea, TS12 3BZ, UK W: traditionalbeams.com T: 01287 348040 E: info@traditionalbeams.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>