Parker Aries Compumotor User Guide
- June 16, 2024
- Parker
Table of Contents
Parker Aries Compumotor
Product Type . . . . . . . . . . . . . . . . . . . . . . . . Aries AR-
01xE, 02xE, 04xE, 08xE, and AR-13xE
The above product complies with the requirements of directives
- EMC Directive 89/336/EEC
- Low Voltage Directive 73/23/EEC
- CE Marking Directive 93/68/EEC
Provided the installation requirements described in the Aries User Guide are met, and there are no special requirements of the installation and operating environment so that the application may be considered typical. The above equipment conforms with the protection requirements of Council Directive 89/336/EEC as amended by Directive 92/31/EEC on the approximation of the laws of the Member States relating to Electromagnetic Compatibility when installed, operated and maintained as intended. Also: -The above equipment conforms with the requirements of Council Directive 73/23/EEC (Low Voltage Directive) as amended by Directive 93/68/EEC (CE Marking Directive), when installed, operated, and maintained as intended.
In accordance with IEC 61800-3:1997 (Adjustable speed electrical power drive systems) this product is of the restricted sales distribution class which meets the needs of an industrial environment when installed as directed. However, further measures may need to be taken for use of the product in a domestic environment. The installation requirements are detailed in the Information supplied with the equipment. The equipment is sold only to competent system builders
Safety Warning! !
High-performance motion control equipment is capable of producing rapid
movement and very high forces. Unexpected motion may occur especially during
the development of controller programs. KEEP WELL CLEAR of any machinery
driven by stepper or servo motors. Never touch any part of the equipment while
it is in operation.
This product is sold as a motion control component to be installed in a complete system using good engineering practice. Care must be taken to ensure that the product is installed and used in a safe manner according to local safety laws and regulations. In particular, the product must be positioned such that no part is accessible while power may be applied. This and other information from Parker Hannifin Corporation, its subsidiaries, and authorized distributors provides product or system options for further investigation by users having technical expertise. Before you select or use any product or system, it is important that you analyze all aspects of your application and review the information concerning the product in the current product catalog.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, safety, and warning requirements of the application are met. If the equipment is used in any manner that does not conform to the instructions given in this user guide, then the protection provided by the equipment may be impaired
RS-232/485 Configuration
The 26-pin DRIVE I/O connector (female D-subminiature) also functions as the communications (COM) port
NOTE
A box surrounding the pins indicates a requirement for twisted pair wiring.
When using the SinCos protocol, pins 9 and 13 require twisted pair wiring.
Warning!
- You must connect the drive’s protective conductor terminal, marked with the earth symbol, to a reliable system Protective Earth.
- The drive’s connector strip terminals are at hazardous voltages when power is applied to the drive, and up to several minutes after power is removed. Lower voltages may still be present for several minutes after power is removed.
- During normal operation, these high voltage terminals must not be accessible to the user.
LED Status Indicators
Output Power Connector
Mains Power Connector
Remove jumpers to use separate control and motor mains AC power input. 120/240
VAC, 50/60Hz,
Single phase
UL Standard of Compliance 508c
Fuse Information
Aries has no internal fuses. For safety, you must provide a fuse in each of
the AC input lines. See Fuse Information in the Aries Hardware Installation
Guide (included on the Aries CD).
References
- Motion Control Systems - A Complete Family of Motion Control System Products from Parker Hannifin
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>