Ecowell WMTS01 Gooseneck Electric Kettle User Manual

: June 15, 2024
: Ecowell

Table of Contents

Ecowell WMTS01 Gooseneck Electric Kettle User Manual
IMPORTANT SAFETYMA TTERS NEEDING ATTENTION
CAUTION: DO NOT IMMERSE IN ANY LiquiD

Ecowell WMTS01 Gooseneck Electric Kettle User Manual

IMPORTANT SAFETYMA TTERS NEEDING ATTENTION

WARNING: Potential injuries may caused from misuse of this appliance. Please carefully read this Manual before using this product.This appliance is only be allowed for the intend use listed in the manual. Before powering on this product, please check whether the voltage marked
on itis consistent with the voltage in your house. In case of inconsistency, please do not use this product and then contact the store where you buy this product. e |tis a must to insert the power plug of
this product into an earthed power socket and ensure to earth it well.

Do not operate any appliance with a damaged cord! If the power line of this product is damaged, in order to avoid danger, you must arrange professional person of its manufacturer or maintenance department or a similar specialized person to replace the power line. e It is forbidden to use any component not recommended by the manufacturer of this product in order to avoid fire, electric leakage or any other damage.
This appliance is only to be used with the stand provided. Itis forbidden to hang the power line of this product on any edge of any table or make it contact any high-temperature surface; otherwise, the power line will be damaged.
It is forbidden toplace and use this product on or beside any hightemperature gas cooking stove or electric oven.
Please do not heat this product when it is empty; otherwise, its heating tube will be damaged.

CAUTION: DO NOT IMMERSE IN ANY LiquiD

It is forbidden to soak this product in water or any other liquid in order to avoid fire, electric leakage or endanger personal safety
WARING: When water is boiling, please do not move the kettle lid.
CAUTION: Place the kettle lid properly so that steam is directed away from the handle andnot be able to scalding yourself or any other person.

ATTENTION: Please ensure that you have pulled the power plug out whenever you want to fulling / moving / cleaning the electric kettle;
Heating element surface is subject to residual heat after usebefore cleaning it, you must first cool the kettle to preventinjury.
When the kettle is not cool but it is necessary to fill it with water, you should carefully openits lid.
It is forbidden to touch its hightemperature surface; Please use handles whenever you want to move the kettle. otherwise, you will be scalded.
When pouring the boiled water out, please be slow and careful to prevent the boiled water from scalding yoursel orany other person.
When water is heating or after water is boiling, you are forbidden to touch the steam gushing from the spout or open the kettle lid in order to prevent you from being scalded by the steam.
Children are not allowed to near/ play / operate / clean / maintain this product without close supervision by adult.
When using this product, you should place it at a horizontal and firm plac out of children’s reach; otherwise, the kettle will scald people or be damaged if a child pulls its power line or knock it. ® This product is not appropriate for those who suffer physical, sensory or mental disability or lack experience and knowledge of use (including children) unless such persons’ guardians give supervision or guidance related to the use of this product.
This product can only be used for houses, places, outdoor usage forbidden:
~ Do nottouch hot surfaces. Use handles orknobs.
— To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or (state specific part or parts in question) in water or other liquid.
— Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.

SAVE THESE INSTRUCTIONS

Schematic Diagram of This Product

NOTES FOR USE OF EXTENSION CORD

a) A short power-supply cord (or detachable power-supply cord) is provided to reducisks resulting from becoming entangled in or tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are available and may beused if care is exercised in their use.
c) If along detachable power-supply cord or extension cord is used:

The marked electrical rating of the detachable power-supply cord or extensiocordshould be at least as great as the electrical rating of the appliance;
If the appliance is of the grounded type, the extension cord should be a groundingtype 3-wire cord; and
The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.

PREPARATIONS FOR USE

It is necessary to carefully open its packaging box, keep all the packaging materials inside it, and then carefully read its manual to check whether or not it parts are complete. Before using thiskettle for the first time, you should use a piece of wet cloth to wipe up the body of
kettle and then use a piece of dry cloth to wipe it dry, and then fill it with water to th full-scale position and then boil the water and finally pour the boiled water out and then repeat the previous steps twice.
Note: Itis forbidden to soak this productin water or add water higher than th maximum water level (the maximum capacity of this product is 800ml).

TECHNICAL PARAMETERS

Model WMTS01
Rated Power 1200W
Rated Voltage 120V AC
Frequency 60Hz

Product Features

The thin and long spout is convenient to make coffee
The matte black plastic electronic base looks high-grade and convenient to use;
. The outer layer of the kettle lid is mad from plastic material and the inner layer is made from steel to prevent it from scalding hands;
The manual lid-opening design makes the kettle lid flexible and durable;
This product is equipped with a connector STR 1X-68 (C68, U68) which can provide overheating and power-off protection;
The temperature-sensing probe NTC can automatically detect the water=temperature in real time and sense th cut-out;
The electronic display screen can display the temperature, time, logo and son;
You can set any target temperature to automatically boil water: In th temperature hold mode, you can set any target temperature in the range of 40°C to 100°C ( converted into the corresponding temperature values in Fahrenheit) to keep the temperature constant and this product can keep the temperature constant for 60 minutes at most; if not in the temperature hold mode, this product can automatically keep the temperature constant for 10 minutes at most;
You can choose the temperature displayunitin Celsius or Fahrenheit via a menu t adaptto the customs in different places;
You can choose the beep prompt toneon/off via a menu to adapt to different users’ demands;
You can choose the countdown clock via a menu so that green hands can lear to make coffee or tea;
. The body of kettle is separate from th base with power supply so that you can freely rotate the body of kettle at any angle.

FUNCTION DESCRIPTION

Power-on and start-up After this product is powered on, its beep will make a sound (the beep is setto be on by factory default and will not sound if the user sets it to be off); at the moment, the character “CRZDEAL” will be displayed on the screen from right to left and then go outto enter the standby mode.
Water boiling on/offIn the standby status, when you click thebutton, the beep will make a sound (thebeep is set to be on by factory default andwill not sound if the user sets it to be off);moment, the blue indicator lamp will be on, the screen will display the preset temperature and the real-time
temperature; in case of no othe operation, this product will start to heat up the water in 3 seconds.
The preset temperature is 100°C by factory default and the scree dynamically displays the real-time temperature value.
In the water heating-up status, when you rotate the rotary knob towards the left or right, you can set the target temperature; when you rotate the rotary knob clockwise, you can increase the temperature value; When you rotate the rotary knob counterclockwise, you can decrease the temperature value; in this
process, the real-time temperature display will not change.
In the water heating-up status, after the water temperature gets to the preset temperature, this product will stop heating up the water and the beep will urgentl make three sounds and then the blue indicator lamp will twinkle.
In the water heating-up status, when you the button, you can close the water heating-up mode, the screen will go out and this product will enter the standby status.

3.Timer

In the water heating-up mode, when you
long press the button for 1.5 seconds, thisproduct will count backwards “3′, 2” and”1″and then you can access to the timingmode; at the moment, the screen willdisplay the timer and the currenttemperature value. You can adjust the temperature by rotating the rotary knob; atthe moment, the screen will display th current temperature value and the preset temperature value; in case of no other operation within one second, the screen will switch back to the timer interface.
When you click the button, this product will exit from the timing mode and return to the status of water heating-up mode.

4, Setting

In the standby mode, when you long press the button for 1.5 seconds you can access to the setting options:
(@Temperature hold on/off setting
@ Beep on/off setting
@ Temperature unit setting
Temperature holds on/off setting /
Temperature hold time setting:
(@Temperature hold on/off setting

In the status of temperature hold on/off setting, when you rotate the rotary knob, you can choose “HOLD OFF” or “HOLD
ON”; after that, you can click the butto for confirmation and then enter the bee on/off setting; when you set this product to “HOLD OFF” to close the temperature hold function, this product can automatically keep the temperature constant for 10 minutes; When you set this product to “HOLD ON”, this product will
keep the temperature constant for 60 minutes.

( Beep on/off setting In the status of beep on/off setting, when you rotate the rotary knob, you cachoose “BEEP OFF” or “BEEP ON”; aftethat, you can click the button forconfirmation and then access to thetemperature unit setting interface.
® Temperature unit settingIn the status of temperature unit settingwhen you rotate the rotary knob, you canchoose “”UNIT°C” or “UNIT °F”.After that, you can click the button for
confirmation and then access to the temperature hold on/off setting.
In accordance with American standard,the temperature unit is displayed in °F by default.
During the setting, this product will automatically return to the standby status ifthere is no operations within 3 seconds.

CLEANING AND MAINTENANCE

Before this product, be sure to pull its power plug out of its power socketItis forbidden to soak the kettle in water or wet tin order to avoid electric leakage; itis forbidden to clean the kettle in a dishwashing machine!\ Please clean the outer surface of this kettle with soft cloth and then wipe it dry
with dry cloth. It is forbidden to clean this kettle with toxic detergent.

DISCARD AND RECYCLING

Itis necessary to destroy the package of this product as per the local regulations on waste disposal. It is necessary to classify paperboard and paper as recyclable paper, and classify platinum as recyclable resource (potentially recyclable resource). After this product is
discarded, it is not allowed to directly dispose it as household waste and itis a must to send it to the recycle station for recycling electronic products specially. The marks of this product in the user’s manual and on the package have shown thatit is not allowed to throw this product into any garbage can (see the symbol “x” on the garbage can, as shown in the above picture). 13
For the problem of how to dispose an old and useless milk foa machine, you are required to consult your local recycle station (old equipment recycle station designated by your municipal government);
if the label reminds that all the materials are reusable, you will make contributions to environmental protection as long as you use the reused old equipment made from recycled materials or otherwise.

WARRANTY

Alton Industry Ltd. Group
-YEAR LIMITEDWARRANTY
This warranty covers any defects in materials or workmanship of the enclosedproduct. Alton Industry Ltd. Group will repair or replace any defective materials dueto craftsmanship of the product. This warranty does not cover any problem causedby misuse, abuse, accidents or acts of God, such as floods or hurricanes.Consequential and incidental damages are not covered under this warranty.
Coverage terminates if you sell or otherwise transfer the ownership. If you feel youhave a defective product, please submit a copy of your receipt to the address belowand call 1-888-899-0146 for instructions prior returning this item to the store orsending back to:
Alton Industry Ltd. Group643 Innovation Drive
West Chicago, IL 60185
We will inspect the product and contact you within 72 hours to give you the results ofour inspection. We reserve the right to repair or replace the product at our discretion.
However, we may replace the product with one of similar but not exact features.Parts and Service Information available call Alton Industry at 1-888-899-0146. This warranty gives you specific legal rights. You may have other rights which vary fromstate to state.