Y H 3000W Solar Hybrid Inverter Instruction Manual

Y H 3000W Solar Hybrid Inverter

Product Information

Specifications

• Manufacturer: Shenzhen Yonghui Fashion Co., Ltd
• Model: SML Series
• Contact Information:
  • WhatsApp: +86 13750091547
  • Email: [email protected]
  • Website: https://www.yonghuisolar.com/

Product Usage Instructions

Installation

To install the SML Series, follow these steps:

1. Ensure that you have all the necessary tools and equipment.
2. Select a suitable location for installation, considering factors such as sunlight exposure and accessibility.
3. Mount the SML Series securely using the provided mounting brackets.
4. Connect the necessary cables according to the provided wiring diagram.
5. Verify the installation by checking the connections and ensuring stability.

Operation

To operate the SML Series, follow these instructions:

1. Ensure that the device is properly installed and connected to a power source.
2. Refer to the user manual for any specific settings or configurations.
3. Use the control panel or remote control (if applicable) to adjust the desired settings, such as brightness or timer settings.
4. The SML Series will automatically turn on/off based on the ambient light conditions or programmed schedule.

Maintenance

To maintain the SML Series, follow these guidelines:

1. Regularly clean the solar panels to remove any dirt or debris that may reduce efficiency.
2. Inspect the cables and connections for any signs of damage or wear.
3. Replace any faulty or damaged components with genuine parts from the manufacturer.
4. Keep the surrounding area free from obstructions that may block sunlight.

FAQ

Q: How do I contact the manufacturer for support?

A: You can reach out to the manufacturer through the following channels:

• WhatsApp: +86 13750091547
• Email: [email protected]
• Website: https://www.yonghuisolar.com/

Q: Can I adjust the brightness of the SML Series?

A: Yes, you can adjust the brightness of the SML Series using the control panel or remote control (if applicable). Please refer to the user manual for detailed instructions.

Q: How does the SML Series turn on/off?

A: The SML Series has an automatic function that turns on/off based on ambient light conditions or a programmed schedule. This ensures optimal energy efficiency and convenience.

This manual describes the assembly of the unit as well as the precautions to be taken, please read this manual carefully before installation and operation. Save this manual for future reference.

Power All Your Daily Needs

1. LCD Display
2. Status indicator
3. Charging indicator
4.  Fault indicator
5. Function button
6. AC Input
7. AC Output
8. Battery Input
9. PV Input

Schematic diagram of PV system connection

System connection steps

Battery wiring –> AC input/output wiring –> Solar panel wiring –> Turning on the inverter switch –> Connecting loads
The circuit breaker must be off before wiring. After finishing, check again that all wiring is correctly connected to the positive and negative terminals, and then turn on the battery , AC input/output, and PV input in turn.

Note 1: Must turn on the battery circuit breaker first
Note 2: Support single-phase/L+N=230V; not support AC110V output, not support 110v+ 110v= 220v

1. Cutting one of the plugs. We remove the ground wire from the plug. If you want the ground wire. You can keep the AC input ground wire. The picture is only L,N.
2. AC input/output connection circuit breaker.

Battery connection

The machine must be connected to a battery before it can be used. Applicable Battery
TypeVoltage:
SML-1600W-12V-M80A for 12V lead-acid(Seal, AGM, Gel, Flooded) and lithium batteries.
SML-3000W-24V-M80A for 24V lead-acid(Seal, AGM, Gel, Flooded) and lithium battery.
Battery Cable Size & Circuit Breaker
Model: SML-1600W-12V-M80A; Cable Size: 4AWG;
Model: SML-3000W-24V-M80A Cable Size: 6AWG;

AC input connection

1. AC output connection
   Before connecting the AC input/output, install a separate air switch between the inverter and the AC input/output. This will ensure that the inverter can be safely disconnected during maintenance.
   NOTE: The L port must be properly connected to the positive terminal of the air switch, theN port must be properly connected to the negative terminal of the air switch and the circuit breaker must be OFF when making the AC Input/Output connections.

AC Input/Output Cable Size with Circuit Breaker
SML-1600W-12V-M80A: AC cable size: 14AWG; Circuit breaker: 10A/2.0kva
SML-3000W-24V-M80A;AC cable size: 12AWG;Circuit breaker: 32A/3.2kva

Panel connection

When connecting the solar panel, please connect the positive and negative terminals of the machine and the panel correctly.

PV cable size and circuit breaker recommendations
SML-1600W-12V-M80A,SML-3000W-24V-M80A;Recommended cable size 1*16AWG;. Panel voltage/power requirements :(Please use the same specification panel for series-parallel connection)
SML-1600W-12V-M80A: solar panel power maximum 1600W, panel starting voltage should reach > 35V above, working voltage range is 30V-400VDC, maximum working voltage is 400VDC.
SML-3000W-24V-M80A: solar panel power up to 3000W, panel start-up voltage should reach > 35V above, working voltage range is 30V-400VDC, maximum working voltage is 400VDC.

Note 1: Connecting in series, the panel’s power and voltage VOC are added together; connecting in parallel, the panel’s power is added together, but the panel’s voltage VOC is not added together.

Note 2: Using 35v/400v will not be the best input voltage, the panel voltage is not stable. The best voltage recommendation is between 70-250v.

Turn on the power switch

Once the unit is properly installed and the batteries are well connected, press the on/off switch. The inverter starts.

About load power

Note: The inverter power must be 3-7 times the load power. (For inductive loads, refrigerators, air conditioners, washing machines, and water pumps. (Equipment with motor)
For example: air conditioner rated power 700W, 700W * 3 = 2100W, then you need to buy the power of 2400W or more machines. For example: LED is a rational load, and the power is 50w. 1600 W machine can be used 32pcs

 The inverter not working solution

Please complete the following 3 steps:

1. The inverter can not work, how to troubleshoot the inverter?
2. Disconnect all wiring in the system, wait 10 minutes, then connect only the battery to start and check if there is a fault code
3. Run the inverter with current appliances to see if there are any fault codes.
4. Run the inverter with a lower power appliance to test for fault codes.
5. Connect solar energy
6. Connect to utility power
7. If any of the above steps shows a fault code, please close the current step immediately. Refer to the manual for the solution to the fault code.
8. When you want to contact Y&H customer support. In order to solve the problem faster , please give us the following information so the technician can analyze the problem.
9. How many watts of solar panels? How many panels do you have?
10. How many volts is the open circuit voltage of the solar panel? (Voc). How are they connected in series and parallel? Or you can test how many volts is the solar panel input voltage?
11. What is the battery voltage? Inverter DC range is 30-400V. minimum starting voltage of 35V. 70- 240v recommended.
12. Take a picture of the LCD display. Provide a barcode on the side of the inverter
13. Is it connected to the mains?
14. How do I record a video? So that the technician can analyze the problem
15. Video 1: Use a multimeter to test the battery voltage, then connect the battery to the inverter. And turn on the inverter switch. Take a picture of the inverter LCD display.
16. Video 2: Please connect a load and shoot the inverter LCD display.
17. Video 3: Use a multimeter to test the panel voltage, then connect the panel input to the inverter and shoot the inverter LCD display. Video 4: Please connect the AC input and shoot the inverter LCD display If there is an error code in any of the above steps, please terminate immediately and take a video.

 After-sales contact

Please feel free to communicate with us anytime if you have any problems during the use. In order to save communication time, we suggest you contact us directly through WhatsApp. We can contact you in time with any new reply. It is recommended to contact the customer service of the purchasing store first.

WhatsApp:+8613750091547
[email protected]

References

• Yonghui Solar Inverter, Various hybrid inverters, grid tie inverters, – Shenzhen Yonghui Co., Ltd

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>