EUERTE K01PRO Fingerprint Lock User Manual
- June 16, 2024
- EUERTE
Table of Contents
EUERTE K01PRO Fingerprint Lock
Product Information
Specifications
- Model No.: K01PRO
- Compliance: Part 15 of the FCC Rules
- Operating conditions: Uncontrolled environment
- Minimum distance between radiator and body: 20cm
Product Usage Instructions
1. Safety Precautions
Before using the product, please read and understand the following safety precautions:
- Do not make any changes or modifications to the product that are not expressly approved by the responsible party for compliance.
- Doing so may void your authority to operate the equipment.
- Ensure that the product is used within the specified operating conditions.
- Maintain a minimum distance of 20cm between the radiator and your body during installation and operation.
2. Installation
To install the product, follow these steps:
- Select a suitable location for installation with proper ventilation.
- Place the product on a stable surface.
- Ensure that there is a minimum distance of 20cm between the radiator and your body.
- Connect the necessary cables and power supply to the product.
3. Operation
To operate the product, please refer to the following instructions:
- Ensure that the product is connected to a power source.
- Turn on the power using the designated power button or switch.
- Follow the specific instructions provided for the desired functionality of the product.
- Monitor the product during operation to ensure it is functioning correctly.
4. Maintenance
To maintain the product’s performance and longevity, please follow these guidelines:
- Regularly clean the product using a soft cloth and mild cleaning solution.
- Avoid exposing the product to extreme temperatures, moisture, or direct sunlight.
- Keep the product away from liquids and avoid spilling any substances on it.
- Do not attempt to disassemble or repair the product yourself.
- Contact authorized service personnel for assistance.
FCC
FCC Compliance and Radiation Exposure Statement
FCC Compliance
The Model No.:K01PRO device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Q: Is the product compliant with FCC regulations?
A: Yes, the product complies with Part 15 of the FCC Rules.
Q: What is the recommended distance between the radiator and the body?
A: The recommended minimum distance between the radiator and the body is 20cm.
Q: Can I modify or make changes to the product?
A: No, any changes or modifications not expressly approved by the responsible party for compliance may void your authority to operate the equipment.